80 - 82 "M" engine mount towers

User avatar
AussieRod
Posts: 2804
Joined: Sun Sep 05, 2010 1:43 am
Bronco Info: 81 Bronco XLT, 250 alloy head crossflow 6, NP435/NP208, 4:10 gears, 31-10.5R15 M/Ts.
Location: Downunder

80 - 82 "M" engine mount towers

Post by AussieRod »

I'm after the engine mount towers that bolt to the front X member on 80 to 82 F trucks or Broncos for the 351/400M engine. (5.0L - 5.8L mounts won't work). I have the correct rubber engine mounts, but need these towers to correctly locate the engine in the chassis. If you have a pair, or are at the pick-a-part and find a pair, let me know what they are worth to you plus postage to 3556 Myers Flat, Victoria, Australia and I will paypal you as a gift plus an extra $20 to cover your fuel, etc.
User avatar
AussieRod
Posts: 2804
Joined: Sun Sep 05, 2010 1:43 am
Bronco Info: 81 Bronco XLT, 250 alloy head crossflow 6, NP435/NP208, 4:10 gears, 31-10.5R15 M/Ts.
Location: Downunder

Re: 80 - 82 "M" engine mount towers

Post by AussieRod »

Correction: I am "told" the small block mount plates don't work. If anyone has better info, let me know. Thanks.
User avatar
AussieRod
Posts: 2804
Joined: Sun Sep 05, 2010 1:43 am
Bronco Info: 81 Bronco XLT, 250 alloy head crossflow 6, NP435/NP208, 4:10 gears, 31-10.5R15 M/Ts.
Location: Downunder

Re: 80 - 82 "M" engine mount towers

Post by AussieRod »

Cancel that. I'm going to make mounting plates for my Autofab super mounts to fit the 400M.
Post Reply