GoFastBroncos.com

If anyone has a set lying around they are not using let me know. The circle shape on one of my flanges became oval and will not seat very well.

the summit (pace) headers have been very good to every one that i know whos used them, and they are cheap

Make sure you check the flange is flat before installing

tcinu2 wrote:Make sure you check the flange is flat before installing

and use good gaskets, ive always used copper gaskets, they get a good crush and form a good seal

I have a set of the summit ones already... which is the issue ha didn't think much of it at the time but I can hear the leak..

biggiek wrote:I have a set of the summit ones already... which is the issue ha didn't think much of it at the time but I can hear the leak..

are you sure its leaking at the head?

did u use decent gaskets?

may not be the fault of the hearder

Best header gasket I have ever used , Remflex exhaust gaskets with stage 8 locking bolts
http://catalog.remflex.com/

They are primarily leaking from where the y pipe and header meet up. The flange on the base of the header is not perfectly round thus not allowing for a good seal (exhaust shop told me this after I had issues getting them to seal). If someone had some laying around would rather try that then buy brand new headers.

Think this is what your looking for, I would make sure they will fit ?

http://forums.corral.net/forums/exhaust ... aders.html

Back up for these they have a couple small cracks in the welds. Figured someone may have a nice slightly used seat for what I would pay for a new basic set.

Still looking

I have some stainless Bassani headers I just pulled off my 96 due to CA smog legality. I can sell them to you. Send me a PM and we can figure out a price.

Messaged

Stan still looking for feedback.

ihave a brand new pair of flowtechs still in box with good gaskets and arp bolts if interested.

I will let you know I have a deal I'm working out.