TTB D44 gearset and carrier
- AussieRod
- Posts: 2804
- Joined: Sun Sep 05, 2010 1:43 am
- Bronco Info: 81 Bronco XLT, 250 alloy head crossflow 6, NP435/NP208, 4:10 gears, 31-10.5R15 M/Ts.
- Location: Downunder
TTB D44 gearset and carrier
Putting feelers out for a good used 4.09:1 front D44 gearset and carrier. Reasonable prices considered and I will pay the shipping, paypal fees, etc. Let me know what you have.
- Wrightracing.net
- Posts: 2214
- Joined: Thu Oct 28, 2010 9:58 pm
- Bronco Info: 1972 Bronco with an 86 chassis, full cage and Long travel coil-over suspension.
- Location: San Diego
- Contact:
Re: TTB D44 gearset and carrier
Hey Rod
You still looking for a front D44 ttb third member? I have a open diff in my 86 Bronco with 4.10 to 1 gears by Pro Gear in San Diego CA. It has worked great and is still in my 86 Bronco. I would ask $400 for that.
I am pulling that out to put in a 1982 third member with the 3 hole bearing retainer on the passenger side with a ARB air locker and 5.14 to 1 gears. Also I am upgrading to 1350 U-joints and The bigger Dana 50 axles.
I also have a Eaton Detroit Mechanical Truetrac Limited Slip Differential D44 that I was going to use before I got a great deal in the ARB. It is in great condition and I would ask $400 for that. I got it off GofastBronco several years ago and never used it.
It will take me a couple weeks to pull the third member out of the 86 Bronco But the Eaton LS is ready to ship.
I have a friend that will pull it for me, I have a herniated disc in my lower back. I just need to work around his schedule.
David
You still looking for a front D44 ttb third member? I have a open diff in my 86 Bronco with 4.10 to 1 gears by Pro Gear in San Diego CA. It has worked great and is still in my 86 Bronco. I would ask $400 for that.
I am pulling that out to put in a 1982 third member with the 3 hole bearing retainer on the passenger side with a ARB air locker and 5.14 to 1 gears. Also I am upgrading to 1350 U-joints and The bigger Dana 50 axles.
I also have a Eaton Detroit Mechanical Truetrac Limited Slip Differential D44 that I was going to use before I got a great deal in the ARB. It is in great condition and I would ask $400 for that. I got it off GofastBronco several years ago and never used it.
It will take me a couple weeks to pull the third member out of the 86 Bronco But the Eaton LS is ready to ship.
I have a friend that will pull it for me, I have a herniated disc in my lower back. I just need to work around his schedule.
David