MAF EEC V Tuning
-
Woodsman1991
- Posts: 7
- Joined: Wed Feb 24, 2021 7:03 pm
- Bronco Info: Pretty much bone stock, free motor and front end rebuild. 1992 with 5 speed 302
MAF EEC V Tuning
Have a MAF EEC V setup in my bronco currently and it was swapped from a 96 F150, E4OD. Currently running a ZF5 manual trans and having tons of codes getting set related to the transmission being deleted. Does anybody know of shops that have experience tuning the Ford EEC V systems?
-
RyanDS650X
- Posts: 1867
- Joined: Sun Dec 13, 2009 11:13 am
- Bronco Info: Autofab '96 XLT 5.8
- Location: Mesa, AZ
- Contact:
Re: MAF EEC V Tuning
Tuning these things is becoming a lost art. Where are you located?
Sent from my SM-G991U using Tapatalk
Sent from my SM-G991U using Tapatalk
'96 XLT 5.8l lil edelbrock, lil Autofab, LOTTA fun.
"I wouldnt even call adding beer as part of a prep...its like putting tires on the vehicle, you just do it."
-shockseals.com
"I wouldnt even call adding beer as part of a prep...its like putting tires on the vehicle, you just do it."
-shockseals.com
-
Woodsman1991
- Posts: 7
- Joined: Wed Feb 24, 2021 7:03 pm
- Bronco Info: Pretty much bone stock, free motor and front end rebuild. 1992 with 5 speed 302
Re: MAF EEC V Tuning
Seattle Washington area. Surely somebody here knows someone? Or is everyone just swapping to an LS and moving on with life?
Re: MAF EEC V Tuning
Look up EFI Guy - his name is Garry Vance and he lives in Colorado. He's done a lot of EEC-V tuning stuff for us Early Bronco guys over the years. He can no longer do a bunch of the stuff he used to do in terms of emissions stuff removal but might be able to help you.
Todd Z.
Todd Z.