Has anyone used a laser Argon tig welder on DOM steel or aluminum?
I saw a video that made it look quicker than normal tig welding.
Does it get good Penetration?
What wattage did you use?
I am thinking about getting this one? It might be a good introduction to laser welders?
David
Laser tig argon welder
- Wrightracing.net
- Posts: 2214
- Joined: Thu Oct 28, 2010 9:58 pm
- Bronco Info: 1972 Bronco with an 86 chassis, full cage and Long travel coil-over suspension.
- Location: San Diego
- Contact:
- Wrightracing.net
- Posts: 2214
- Joined: Thu Oct 28, 2010 9:58 pm
- Bronco Info: 1972 Bronco with an 86 chassis, full cage and Long travel coil-over suspension.
- Location: San Diego
- Contact:
Re: Laser tig argon welder
I have now seen the new Laser welders from Everlast.
They have a 2000 watt version that is perfect for Off-Road fabrication. It works on Aluminum and steel and 1/2" steel in a single pass. They even descale rust and old paint. That is so cool. It also works like a plasma cutter. So 3 machine's in one. At $12k that is not to bad.
David
They have a 2000 watt version that is perfect for Off-Road fabrication. It works on Aluminum and steel and 1/2" steel in a single pass. They even descale rust and old paint. That is so cool. It also works like a plasma cutter. So 3 machine's in one. At $12k that is not to bad.
David
- SteveG
- Admin
- Posts: 6106
- Joined: Sat Dec 05, 2009 10:25 am
- Bronco Info: Wilson: 96, Stretched 17.5", coil-overs / Bypasses, 4-link, a fridge and all the amenities :)
- Location: Arroyo Grande, CA
Re: Laser tig argon welder
Interesting. If you get one, I’m super interested in hearing about it
Sho nuff,
SteveG
SteveG