Stretched 12 OG GFB
- funinthesun95
- Posts: 1701
- Joined: Thu May 13, 2010 2:06 pm
- Bronco Info: 1992 Bronco MAF UsShift
- Location: San Diego
- Contact:
Re: Stretched 12 OG GFB
wishing I would have kept the front shocks on the bronco until new ones came .......The bronco and I need some dirt miles.
Good people + Great info = GFB
@csracingteam
@Cockstarmotorsports
@csracingteam
@Cockstarmotorsports
- funinthesun95
- Posts: 1701
- Joined: Thu May 13, 2010 2:06 pm
- Bronco Info: 1992 Bronco MAF UsShift
- Location: San Diego
- Contact:
Re: Stretched 12 OG GFB
Ok I picked up the shock and mocked up temp installed ....4.0 rear need remote the res so 3.0 went back on for now.
ended up with a 3.0 3.5 combo front and will only need to move lower mount out.
rear 3.0 was good 4.0 the res hit a tube...I know about this and forgot to remote the 4.0 from king. I remembered to do this for the front. 4.0 in front might have made me redo upper mount so I said nope.
ended up with a 3.0 3.5 combo front and will only need to move lower mount out.
rear 3.0 was good 4.0 the res hit a tube...I know about this and forgot to remote the 4.0 from king. I remembered to do this for the front. 4.0 in front might have made me redo upper mount so I said nope.
- Attachments
-
- IMG_0313.jpg (88.01 KiB) Viewed 1777 times
-
- IMG_0312.jpg (94.38 KiB) Viewed 1777 times
-
- IMG_0308.jpg (94.06 KiB) Viewed 1777 times
-
- IMG_0307.jpg (80.01 KiB) Viewed 1777 times
-
- IMG_0304.jpg (103.25 KiB) Viewed 1777 times
Good people + Great info = GFB
@csracingteam
@Cockstarmotorsports
@csracingteam
@Cockstarmotorsports
- funinthesun95
- Posts: 1701
- Joined: Thu May 13, 2010 2:06 pm
- Bronco Info: 1992 Bronco MAF UsShift
- Location: San Diego
- Contact:
Re: Stretched 12 OG GFB
rear
- Attachments
-
- IMG_0309.jpg (94.48 KiB) Viewed 1777 times
-
- IMG_0314.jpg (83.76 KiB) Viewed 1777 times
-
- IMG_0311.jpg (64.74 KiB) Viewed 1777 times
-
- IMG_0306.jpg (78.15 KiB) Viewed 1777 times
-
- IMG_0305.jpg (73.5 KiB) Viewed 1777 times
Good people + Great info = GFB
@csracingteam
@Cockstarmotorsports
@csracingteam
@Cockstarmotorsports
- funinthesun95
- Posts: 1701
- Joined: Thu May 13, 2010 2:06 pm
- Bronco Info: 1992 Bronco MAF UsShift
- Location: San Diego
- Contact:
Re: Stretched 12 OG GFB
King did a great job. I gave them shock lengths and they made sure it matched the collapsed length I needed. Since I was not part of the the original build I did my best to make the mounts work and shock cycle better then the previous person that set up the truck did. It cycles correctly now and uses all the bypass on all 4 corners. Once I move the lower front shock mount out further on the beams it will be fantastic and I can find a good spring rate.
Good people + Great info = GFB
@csracingteam
@Cockstarmotorsports
@csracingteam
@Cockstarmotorsports
- funinthesun95
- Posts: 1701
- Joined: Thu May 13, 2010 2:06 pm
- Bronco Info: 1992 Bronco MAF UsShift
- Location: San Diego
- Contact:
Re: Stretched 12 OG GFB
New wheels and tires at the @prerunnerfarm .....I ask and they say "I have a tool for that"
- Attachments
-
- IMG_0321.jpg (158.68 KiB) Viewed 1775 times
Good people + Great info = GFB
@csracingteam
@Cockstarmotorsports
@csracingteam
@Cockstarmotorsports
- funinthesun95
- Posts: 1701
- Joined: Thu May 13, 2010 2:06 pm
- Bronco Info: 1992 Bronco MAF UsShift
- Location: San Diego
- Contact:
Re: Stretched 12 OG GFB
So in two 6 hours shifts of shock installing cycling and test fitting Thursday and Friday, we had the bronco ready for Saturday drive to the dirt mission.
- Attachments
-
- 3807B6B8-30C2-4F64-A1A2-BAD352541E4E.JPG (135.22 KiB) Viewed 1775 times
Good people + Great info = GFB
@csracingteam
@Cockstarmotorsports
@csracingteam
@Cockstarmotorsports
- funinthesun95
- Posts: 1701
- Joined: Thu May 13, 2010 2:06 pm
- Bronco Info: 1992 Bronco MAF UsShift
- Location: San Diego
- Contact:
Re: Stretched 12 OG GFB
day in the dirt 232 miles of road and dirt driving .....oh 3 speed sucks with 5.43 gears on the HWY...lmao
Bedsides off for tube turning
At this location I had one issue. The Bronco would not move/roll forward like I had my foot on the brake, but would go into reverse and roll backwards. I jacked up the front end wheels would spin fine both ways. The hubs for some reason had been put to lock....not me oops. but that did not seem to do anything free or locked. Please note, I have 5.13 front and 5.43 rear as I have not made call on gears selection yet. but it was never in 4x always 2x all day it was super random.
Brennan @goofballracer pulled drive line and off we went to get food in Salton Sea.
Bedsides off for tube turning
At this location I had one issue. The Bronco would not move/roll forward like I had my foot on the brake, but would go into reverse and roll backwards. I jacked up the front end wheels would spin fine both ways. The hubs for some reason had been put to lock....not me oops. but that did not seem to do anything free or locked. Please note, I have 5.13 front and 5.43 rear as I have not made call on gears selection yet. but it was never in 4x always 2x all day it was super random.
Brennan @goofballracer pulled drive line and off we went to get food in Salton Sea.
- Attachments
-
- IMG_0327.jpg (113.5 KiB) Viewed 1774 times
Good people + Great info = GFB
@csracingteam
@Cockstarmotorsports
@csracingteam
@Cockstarmotorsports
- funinthesun95
- Posts: 1701
- Joined: Thu May 13, 2010 2:06 pm
- Bronco Info: 1992 Bronco MAF UsShift
- Location: San Diego
- Contact:
Re: Stretched 12 OG GFB
next up..... BajaHID projector and the bronco one color, oh bumper as well. I will rock the rear glass for now.
I got the new wheels, LP6 on and new intercom in.
vintage air gen IV AC program and charge is needed at some point.
oh man the list is still long. I don't even want to type it out.
these clips suck. order some more last night.
I got the new wheels, LP6 on and new intercom in.
vintage air gen IV AC program and charge is needed at some point.
oh man the list is still long. I don't even want to type it out.
these clips suck. order some more last night.
- Attachments
-
- IMG_0332.jpg (86.81 KiB) Viewed 1773 times
Good people + Great info = GFB
@csracingteam
@Cockstarmotorsports
@csracingteam
@Cockstarmotorsports
-
- Posts: 93
- Joined: Wed Dec 25, 2019 3:50 pm
- Bronco Info: 1992 Bronco. Caged, Linked and Loud
- Location: Menifee CA
Re: Stretched 12 OG GFB
Awesome.
-
- Posts: 93
- Joined: Wed Nov 09, 2016 9:16 pm
- Bronco Info: 1982 c6, 9" gears, lockers,
Re: Stretched 12 OG GFB
Really sick dude
- funinthesun95
- Posts: 1701
- Joined: Thu May 13, 2010 2:06 pm
- Bronco Info: 1992 Bronco MAF UsShift
- Location: San Diego
- Contact:
Re: Stretched 12 OG GFB
Thank you it was a good find.
Good people + Great info = GFB
@csracingteam
@Cockstarmotorsports
@csracingteam
@Cockstarmotorsports
- funinthesun95
- Posts: 1701
- Joined: Thu May 13, 2010 2:06 pm
- Bronco Info: 1992 Bronco MAF UsShift
- Location: San Diego
- Contact:
Re: Stretched 12 OG GFB
Lets make it one color Steel-it until paint or Rap happens.....why not
Tailgate and rear finders done.....Cab, shell and hood next
Tailgate and rear finders done.....Cab, shell and hood next
- Attachments
-
- IMG_1454.jpg (45.54 KiB) Viewed 1533 times
-
- IMG_0212.jpg (45.82 KiB) Viewed 1533 times
-
- IMG_0200.jpg (36.39 KiB) Viewed 1533 times
-
- IMG_0199.jpg (35.45 KiB) Viewed 1533 times
Good people + Great info = GFB
@csracingteam
@Cockstarmotorsports
@csracingteam
@Cockstarmotorsports
-
- Posts: 93
- Joined: Wed Dec 25, 2019 3:50 pm
- Bronco Info: 1992 Bronco. Caged, Linked and Loud
- Location: Menifee CA
Re: Stretched 12 OG GFB
Nice.
- funinthesun95
- Posts: 1701
- Joined: Thu May 13, 2010 2:06 pm
- Bronco Info: 1992 Bronco MAF UsShift
- Location: San Diego
- Contact:
Re: Stretched 12 OG GFB
I mean it's a chevy but.........why not
- Attachments
-
- IMG_1385.jpg (154.83 KiB) Viewed 1279 times
Good people + Great info = GFB
@csracingteam
@Cockstarmotorsports
@csracingteam
@Cockstarmotorsports