1996 Eddie Bauer

[24hours]

What size adapter/reducer did you use to attach that 90* to your radiator?

[Becks_Bronco]

6mjic x 1/4 mpt.

[24hours]

Thanks. I like how the 90’s keep the lines close/parallel to the radiator. I had a hell of a time locally sourcing parts without increasing the diameter of the line.

[Becks_Bronco]

Thanks. I like how the 90’s keep the lines close/parallel to the radiator. I had a hell of a time locally sourcing parts without increasing the diameter of the line.

I agree, and it's why i chose 90's. I should be able to just carry extra 3/8 hose and repair anything i need on the side of the road with the push lock fittings.

[24hours]

I think that was my hang up sourcing fasteners then. I stayed 5/16th I.d. hose.

[biggiek]

Where did you snag all the fittings at? I need to redo all my stuff and like this a lot.

[RyanDS650X]

Where did you snag all the fittings at? I need to redo all my stuff and like this a lot.

Go to SDHQ and ask Sabrina for help. She will get you lined out.

Sent from my SM-G960U using Tapatalk

[Becks_Bronco]

Where did you snag all the fittings at? I need to redo all my stuff and like this a lot.

Alternative hose in Anaheim.

XRP Racing makes all the fittings as well. One day when I’m bored I’ll get the pretty stuff lol

[Becks_Bronco]

Talked my fab guy into building a bracket for my sPod brain, located right behind the battery.

[Becks_Bronco]

Ordered a Desolate rear bumper and Greg kindly added a spare tire support hoop. Color matched it to the Eddie gold lower trim. 2 cans of color, and an entire can of clear.

[Becks_Bronco]

Travis sold me his rear axle from the F150, Desolate truss and 4.56 gears installed.



Tore it down and took it to an axle shop for new seals, bearings and a gear pattern check.

[Becks_Bronco]

PRP buckets ordered and installed using Solo Motorsports bracket adaptors.

[Becks_Bronco]

Saginaw swap from Don't Tell My Wife Racing, Desolate pulley.

[Becks_Bronco]

Retrofit headlights from Baja HID, aka Tony.

[Becks_Bronco]

The pile of parts is growing. Custom "sleeper" shock package ordered. Took about 9 months to get, as this was all back during covid. Black anodize, black hoses, black logos. Couldn't get black springs in the right sizes, so had to settle for silver.

[Becks_Bronco]

More Desolate goodies... coiler conversion shock towers and rear upper shock mount.

[Becks_Bronco]

My badass work mechanics slapped in a Desolate belly skid for me.

[Becks_Bronco]

Same badass shop mechanics tackled my leaking oil pan gasket. 190k miles and still on the factory cork gasket. Missing 3 or 4 oil pan bolts too...

[Becks_Bronco]

Some glamour shots

[Becks_Bronco]

Hollander Motorsports 3rd brake light, thanks to Tony!




Came with a generous amount of wire for the small led's that are full time brake lights. Took a little trimming of the fiberglass to clear the S2's.




Spliced the 4 LED's into one pigtail and used deutsch connectors for future ease of use.