Too good to die, she is back and in good hands but will be built quite differently. http://www.gofastbroncos.com/forum/view ... =33&t=3712
Basically a rebuild/build thread. Ended up with the chassis and a few parts. The rest of the truck was parted out. I am having to purchase some of the parts that it was built for and have been working on it slowly but progress will be ramping up as parts come in. Plan is to make it a roller, fit body parts, and get it into paint in the next few months. Then I will start assembly. A good friend is throwing me a paint job so I don't want to pass it up, otherwise it would be the last thing I do. So here is a rundown of the parts that are being thrown at it.
Front End -
SWP single swing steering
Flight Industries fabricated knuckles, 13" brakes, and wilwoods
Shocks - King or Fox - whatever I can get at the best price
4.88 w/ tru trac and bolt in axle diff.
ABS power brakes
bump stops - king 2.0
Rear End -
Ruff Stuff - Strange Nodular 4.88 diff with ARB locker
Rear End - Most likely going with a Ruff Stuff rear end
Rear lower links - need to make new ones
Wheels - Performance Machine
Tire - 35" or 37" BFG AT KO. Waiting to see if a deal comes through on the 35's. If I have to pay out of pocket then going 37's
Body -
Autofab 3" fenders and hood
Autofab widened front end - 6" over
Rears - Fiberwerx (tail lights were cut out) otherwise I would run Autofab.
Baja HID lights
Twisted Stich seats
Road Runner fiberglass dash
Setting up for Vintage Air A/C
2 suitcase coolers
Power Train -
96 mass air 460
E4OD trans w/1356 transfer case
Wiring harness from 97 f-250
45 gal fuel safe fuel cell
CBR radiator
Here are a couple of pics of where it is now. Getting my son involved in the build to spur some interest. I'll post some more info later.
https://www.snapfish.com/library/share? ... 0/SNAPFISH
89 Full Build Bronco
-
- Posts: 88
- Joined: Sat Dec 12, 2015 2:15 pm
- Bronco Info: 1981 Bronco Ranger
- Location: Chicago, IL
Re: 89 Full Build Bronco
That's going to be quite the build! Your chassis already looks amazing
1981 Bronco Ranger
LS3/TH400/Atlas II
35" KM2/Raceline beadlocks
sand dunes build
LS3/TH400/Atlas II
35" KM2/Raceline beadlocks
sand dunes build
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: 89 Full Build Bronco
Awesome. Can't wait to see this thing progress again.
Owner of only dead and forgotten projects
- redrdr67
- Posts: 33
- Joined: Fri Dec 25, 2015 1:19 pm
- Bronco Info: 1999 F350, 1999 E350, 1995 F150 2WD
Re: 89 Full Build Bronco
Regarding tires, just got an email from 4wp and they're having a sale on BFG AT 35/17's for 199.00 Figure I'd pass it on here.
Killer build BTW
Killer build BTW
Re: 89 Full Build Bronco
Thanks for the heads up. That is a good price.
- AussieRod
- Posts: 2804
- Joined: Sun Sep 05, 2010 1:43 am
- Bronco Info: 81 Bronco XLT, 250 alloy head crossflow 6, NP435/NP208, 4:10 gears, 31-10.5R15 M/Ts.
- Location: Downunder
Re: 89 Full Build Bronco
THIS is the powertrain I should have gone with. Oh well maybe that will be in the near future.damon1272 wrote: Power Train -
96 mass air 460
E4OD trans w/1356 transfer case
Wiring harness from 97 f-250
- S00TLYFE
- Posts: 1065
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: None Anymore!
- Location: Buena Park
Re: 89 Full Build Bronco
Sounds bitchin, subbed
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)