BAJANCO

Post Reply
User avatar
Bajaluv
Posts: 489
Joined: Thu Mar 06, 2014 9:38 am
Bronco Info: Bone stock, ready to build

BAJANCO

Post by Bajaluv »

Andy Jones wrote:
Bajaluv wrote:
Becks_Bronco wrote:My only potential gripe is that all the gauges would have to be tiny to fit into that package. Nothing wrong with the typical autometer setup. Always thought it'd be nice to adapt a newer F series cluster in. I like the tach and speedo on the ends, with the little gauges across the top. Might have to try and take some measurements on my F150 work truck vs the Bronco.

They have several different options for arrangement and sizing. I’m curious if anybody’s used one, I actually like this one better and might pull the trigger. I’m going to call the manufacture today and get some input. I own all the auto meter gauges needed but to simplify my dash this would be a cool way to go.Image


Sent from my iPhone using Tapatalk Pro
I like this!


Sent from my iPhone using Tapatalk

Of course we’d have to include some other critical gauges like trans temp and possibly oil temp, they sell individual gauges that will have the same look as that cluster. Configuring my own Dash has become pretty fun I cannot wait for it to be installed.


Sent from my iPhone using Tapatalk Pro
Top
User avatar
Becks_Bronco
Posts: 1244
Joined: Sun Dec 20, 2009 2:12 pm
Bronco Info: 96 Eddie Bauer, 5.8
Location: Antioch

Re: BAJANCO

Post by Becks_Bronco »

Bajaluv wrote:
Becks_Bronco wrote:My only potential gripe is that all the gauges would have to be tiny to fit into that package. Nothing wrong with the typical autometer setup. Always thought it'd be nice to adapt a newer F series cluster in. I like the tach and speedo on the ends, with the little gauges across the top. Might have to try and take some measurements on my F150 work truck vs the Bronco.

They have several different options for arrangement and sizing. I’m curious if anybody’s used one, I actually like this one better and might pull the trigger. I’m going to call the manufacture today and get some input. I own all the auto meter gauges needed but to simplify my dash this would be a cool way to go.Image


Sent from my iPhone using Tapatalk Pro
that one is sick!
Top
User avatar
Becks_Bronco
Posts: 1244
Joined: Sun Dec 20, 2009 2:12 pm
Bronco Info: 96 Eddie Bauer, 5.8
Location: Antioch

Re: BAJANCO

Post by Becks_Bronco »

They have systems to install auto headlights etc !! wow, really cool stuff.
Top
User avatar
Bajaluv
Posts: 489
Joined: Thu Mar 06, 2014 9:38 am
Bronco Info: Bone stock, ready to build

BAJANCO

Post by Bajaluv »

Stopped by Autofab to drop my hood for some repairs around the hinge mounts. They are definitely hoarders of all things Ford. ImageImageImage


Sent from my iPhone using Tapatalk Pro
Top
User avatar
Becks_Bronco
Posts: 1244
Joined: Sun Dec 20, 2009 2:12 pm
Bronco Info: 96 Eddie Bauer, 5.8
Location: Antioch

Re: BAJANCO

Post by Becks_Bronco »

Haha! That's where all the beam cores go...
Top
cs_drums
Posts: 2912
Joined: Wed Dec 22, 2010 10:39 am
Bronco Info: 94 5.8 Bronco w/dreams of being finished

BAJANCO

Post by cs_drums »

Check out Speedhut for gauges. They have a bunch of cool shit


Sent from my iPhone using Tapatalk
Top
User avatar
Bajaluv
Posts: 489
Joined: Thu Mar 06, 2014 9:38 am
Bronco Info: Bone stock, ready to build

BAJANCO

Post by Bajaluv »

cs_drums wrote:Check out Speedhut for gauges. They have a bunch of cool shit Image


Sent from my iPhone using Tapatalk

Of course I will be checking this out !!


Sent from my iPhone using Tapatalk Pro
Top
User avatar
Bajaluv
Posts: 489
Joined: Thu Mar 06, 2014 9:38 am
Bronco Info: Bone stock, ready to build

BAJANCO

Post by Bajaluv »

The missing link has shipped, can’t wait to start !! Image


Sent from my iPhone using Tapatalk Pro
Top
User avatar
Bajaluv
Posts: 489
Joined: Thu Mar 06, 2014 9:38 am
Bronco Info: Bone stock, ready to build

BAJANCO

Post by Bajaluv »

Put the front end back together today, bumps installed, new bushing in rear shackles. No more squeaking while driving. Most interior is out for dash install, hopefully in the next couple weeks. Connecting the cab cage to engine cage will put a lot less stress on the fender supports and make the bronco stronger from front to rear. Vintage air, shifter and gauges ready. Probably gonna work on the pimpX and trans controller while dash is out. Hopefully fiberwerx will be calling this week and dash will be ready. Image


Sent from my iPhone using Tapatalk Pro
Top
User avatar
Bajaluv
Posts: 489
Joined: Thu Mar 06, 2014 9:38 am
Bronco Info: Bone stock, ready to build

BAJANCO

Post by Bajaluv »

That was fun !!! One step closer to cage work and new dash.

Image


Sent from my iPhone using Tapatalk Pro
Top
User avatar
Bajaluv
Posts: 489
Joined: Thu Mar 06, 2014 9:38 am
Bronco Info: Bone stock, ready to build

BAJANCO

Post by Bajaluv »

So this is the gauge cluster I decided to go with, probably go with the flat black I dig the fighter jet lookImage


Sent from my iPhone using Tapatalk Pro
Top
User avatar
RyanDS650X
Posts: 1867
Joined: Sun Dec 13, 2009 11:13 am
Bronco Info: Autofab '96 XLT 5.8
Location: Mesa, AZ
Contact:
Contact RyanDS650X

BAJANCO

Post by RyanDS650X »

That’s good looking! I like the black better too.


Sent from my iPad using Tapatalk
Top
cs_drums
Posts: 2912
Joined: Wed Dec 22, 2010 10:39 am
Bronco Info: 94 5.8 Bronco w/dreams of being finished

BAJANCO

Post by cs_drums »

Legitness


Sent from my iPhone using Tapatalk
Top
User avatar
Bajaluv
Posts: 489
Joined: Thu Mar 06, 2014 9:38 am
Bronco Info: Bone stock, ready to build

BAJANCO

Post by Bajaluv »

It seems legit !! Gotta go with the “modern” prerunner look lol. But definitely going matte black on the appearance. It will show Trans temp, oil pressure and whatever else I need on the small screens, seems pretty bad ass.


Sent from my iPhone using Tapatalk Pro
Top
User avatar
Bajaluv
Posts: 489
Joined: Thu Mar 06, 2014 9:38 am
Bronco Info: Bone stock, ready to build

BAJANCO

Post by Bajaluv »

This came today !!! Image

I’m gonna throw the flash drive on computer and see what’s going on. Hopefully some instruction lol Image


Sent from my iPhone using Tapatalk Pro
Top
User avatar
Bajaluv
Posts: 489
Joined: Thu Mar 06, 2014 9:38 am
Bronco Info: Bone stock, ready to build

BAJANCO

Post by Bajaluv »

Also Some shwag today !! Good day to check the mail. Image


Sent from my iPhone using Tapatalk Pro
Top
User avatar
Bajaluv
Posts: 489
Joined: Thu Mar 06, 2014 9:38 am
Bronco Info: Bone stock, ready to build

BAJANCO

Post by Bajaluv »

So after removing the dash I found a kick asss 1991 car alarm lol. Guess it doesn’t work ? Never knew ?? Image

The guys at Stinger performance turned me into this windows based 9” display. It will plug into my new ECM and show real time display gauges. I see a few guys in there forum using it as there dash display. Seems legit and might see how it works. Takes about 25 seconds from turn of key to show gauges. Image fully customizable, this is an example.

Image


Sent from my iPhone using Tapatalk Pro
Top
User avatar
Bajaluv
Posts: 489
Joined: Thu Mar 06, 2014 9:38 am
Bronco Info: Bone stock, ready to build

BAJANCO

Post by Bajaluv »

Pictures came out back wards


Sent from my iPhone using Tapatalk Pro
Top
cs_drums
Posts: 2912
Joined: Wed Dec 22, 2010 10:39 am
Bronco Info: 94 5.8 Bronco w/dreams of being finished

BAJANCO

Post by cs_drums »

I really enjoy that I'm to broke to get the PIMP right now so your doing it first and I can just copy it hahaha

Sent from my moto x4 using Tapatalk
Top
cs_drums
Posts: 2912
Joined: Wed Dec 22, 2010 10:39 am
Bronco Info: 94 5.8 Bronco w/dreams of being finished

BAJANCO

Post by cs_drums »

If I remember correctly you need the PSOM from the stock cluster for the truck to run right. Does this go out the window with pimp? Or are you just gonna tuck the stocker behind the dash. What about smog and having a check engine light?

Sent from my moto x4 using Tapatalk
Top
Post Reply

Return to “Big Broncos”