John's 91 GFB

tactical328 · Post by **tactical328** » Thu Sep 20, 2018 3:55 pm

Dang boy! Some cool seats and the tube wrap is awesome too.

alpinejd3 · Post by **alpinejd3** » Sat Sep 22, 2018 5:39 pm

Final few items getting done. Going to wrap next week, Offroad expo, then hopefully dyno and resting in a few weeks.

: DDBCBA4C-B3C7-4410-BCFC-1A37625A4B41.jpeg (61.92 KiB) Viewed 1932 times

: 705E49FE-562E-4AF7-857F-FF1F4506E1D7.jpeg (100.62 KiB) Viewed 1932 times

: 20F8B1F1-AE77-462B-BBCB-668FD786781B.jpeg (69.08 KiB) Viewed 1932 times

alpinejd3 · Post by **alpinejd3** » Sat Sep 22, 2018 10:36 pm

Made the door locks the door opener.

: 1733DB1C-1073-4C12-802E-22605D8FFD12.jpeg (80.63 KiB) Viewed 1919 times

: 466598B8-0DB4-47FF-A279-69AB9114CCD2.jpeg (74.83 KiB) Viewed 1919 times

yikes · Post by **yikes** » Sun Sep 23, 2018 8:41 am

Love that back window! Any more pictures?

AussieRod · Post by **AussieRod** » Mon Sep 24, 2018 3:10 am

yikes wrote:Love that back window! Any more pictures?

Ditto!

AussieRod · Post by **AussieRod** » Mon Sep 24, 2018 3:37 am

: 20F8B1F1-AE77-462B-BBCB-668FD786781B.jpeg (69.08 KiB) Viewed 1871 times

That bumper is starting to grow on me, too

alpinejd3 · Post by **alpinejd3** » Mon Sep 24, 2018 4:52 am

AussieRod wrote:
yikes wrote:Love that back window! Any more pictures?
Ditto!

Thanks guys. No more pics as of now, bronco is off to be wrapped then heading up to the Offroad expo so once it’s back I’ll get some more pictures of the rear window for you.

alpinejd3 · Post by **alpinejd3** » Thu Sep 27, 2018 10:53 pm

: 9F6BEF38-E611-4680-9233-6E684C9C9FC6.jpeg (100.34 KiB) Viewed 1811 times

: 8744C57B-6047-4A62-91FD-51064540A322.jpeg (95.75 KiB) Viewed 1811 times

: 8848D6A6-DAA8-4B04-A540-395B02E4B733.jpeg (87.93 KiB) Viewed 1811 times

ZACKPUNX · Post by **ZACKPUNX** » Thu Sep 27, 2018 11:40 pm

alpinejd3 wrote:
9F6BEF38-E611-4680-9233-6E684C9C9FC6.jpeg
8744C57B-6047-4A62-91FD-51064540A322.jpeg
8848D6A6-DAA8-4B04-A540-395B02E4B733.jpeg

Dude!! That looks awesome.

Sent from my iPhone using Tapatalk

LvSteve · Post by **LvSteve** » Fri Sep 28, 2018 7:27 am

Bajaluv · Post by **Bajaluv** » Fri Sep 28, 2018 8:21 am

So clean !!!

Sent from my iPhone using Tapatalk Pro

THEJESUS · Post by **THEJESUS** » Fri Sep 28, 2018 11:43 am

SO sick!

alpinejd3 · Post by **alpinejd3** » Sat Sep 29, 2018 9:03 pm

Thanks guys. It’s pretty crazy to see how far this thing has come. Super close to being there. I had not seen the bronco in person for a few weeks and a lot has been done during that time. I went up to the Offroad expo with my son and got to check it out.

: E58E461B-55B5-409E-AECE-68407B6E2578.jpeg (83.47 KiB) Viewed 1753 times

: 75251D6A-C0AB-4B32-9F80-A8A1AEE532E0.jpeg (74.65 KiB) Viewed 1753 times

: 099270BA-733A-4CB9-B325-7F88E98C98FE.jpeg (73.23 KiB) Viewed 1753 times

alpinejd3 · Post by **alpinejd3** » Tue Oct 16, 2018 9:18 am

Wiring is nearly complete, dash unit is the last to go. I am glad I will finally have a full chassis harness on this thing. Had a few random setbacks with wiring, the paddle shift master control unit had some type of electrical issue and went up in smoke once power was sent to it. Luckily the company has amazing customer support and recognized it was a defect so it was repaired immediately and is now in and working. Bad luck continued with a bad PMU for the ecu master system. They also have good custom support and have sent a replacement that should be here today or tomorrow. Without any more setbacks Sunday in plaster city will be the first official shakedown with all the changes.

: IMG_0202.JPG (144.99 KiB) Viewed 1662 times

: IMG_0203.JPG (70.24 KiB) Viewed 1662 times

: IMG_0204.JPG (102.21 KiB) Viewed 1662 times

Bajaluv · Post by **Bajaluv** » Tue Oct 16, 2018 9:04 pm

If I don’t make the Barstow trip I will be there Sunday dude !! Might stop by Vildosola tomorrow to get a peak of your progress, nothing but quality work comes out of that shop.

Sent from my iPhone using Tapatalk Pro

Stan the Man · Post by **Stan the Man** » Tue Oct 16, 2018 10:28 pm

I like those door panels and rear window!

alpinejd3 · Post by **alpinejd3** » Sun Oct 21, 2018 10:40 pm

Stan the Man wrote:I like those door panels and rear window!

Thanks. I am very happy with those they turned out. Building a new frame for the rear window to get is sealed better and then it should be set.

alpinejd3 · Post by **alpinejd3** » Sun Oct 21, 2018 10:43 pm

Well 2nd year in a row I did not make the Desolate run. Came somewhat close but it just wasn't meant to be. Tried to get a desolate rejects run going in plaster city on Sunday but at about 9:30 the night before just when it looked like I was going to make it something inside the master shift control unit broke. I did not have a winters/art Carr ready as a backup but I will now. I am going to remove the bump shifter as it relies on the same control box as the paddle shifters, and will replace it with a winters shifter. I will run the cable and just leave down below (attached to something) and if the paddle shifter ever goes out I will just need to change cable linkages and be up and running. I won't let this crap luck or crap technology keep me from going out for Halloween.

AussieRod · Post by **AussieRod** » Sun Oct 21, 2018 10:51 pm

KISS, John, KISS. (Keep It Simple, Stupid).

alpinejd3 · Post by **alpinejd3** » Mon Oct 22, 2018 12:00 am

AussieRod wrote:KISS, John, KISS. (Keep It Simple, Stupid).

I think simple went out the window when the back half was cut off!!! And it has been nothing but bad decisions since then too.

John's 91 GFB

Re: John's 91 GFB

Re: John's 91 GFB

Re: John's 91 GFB

Re: John's 91 GFB

Re: John's 91 GFB

Re: John's 91 GFB

Re: John's 91 GFB

Re: John's 91 GFB

John's 91 GFB

Re: John's 91 GFB

John's 91 GFB

Re: John's 91 GFB

Re: John's 91 GFB

Re: John's 91 GFB

John's 91 GFB

Re: John's 91 GFB

Re: John's 91 GFB

Re: John's 91 GFB

Re: John's 91 GFB

Re: John's 91 GFB