1994 Bronco for General Tire Media

hollandermotorsports · Thu Oct 15, 2015 8:15 am

Quick little update on the Bronco. I picked it up from Richard's Performance Muffler (RPM) yesterday afternoon. Richard has done a few vehicles for me and I must say that he has a solid team over there. I am beyond stoked with the way the Bronco exhaust turned out. I opted to spend the extra money and go with a full stainless system and Magnaflow helped with the stainless mufflers. They built fender well exit headers that clear everything through full travel. This Bronco sounds so good opened up on the freeway. If you guys are considering custom exhaust go see Richard he will take care of you I am extremely happy I spent the money to have his team take care of this. Next up we have a studio photo shoot this Friday up in Anaheim then I finally get to go test this beast and get it dirty.

: 12105908_1117821734912283_2109098901667029634_n.jpg (91.49 KiB) Viewed 1546 times

: 12109150_1117821758245614_2595639386023212635_n.jpg (59.32 KiB) Viewed 1546 times

: 12109227_1117821814912275_6060343111120660040_n.jpg (48.31 KiB) Viewed 1546 times

: 12119104_1117821838245606_4022008392994854979_n.jpg (58.65 KiB) Viewed 1546 times

: 12122403_1117821791578944_1873331718959687909_n.jpg (65.67 KiB) Viewed 1546 times

tcm glx · Post by **tcm glx** » Thu Oct 15, 2015 8:18 am

Heard the video you posted on IG, it sounds great!!!

hollandermotorsports · Thu Oct 15, 2015 8:38 am

Ya that was before we adjusted idle and fuel pressure. I am hoping to get some Dyno time soon to really wake the motor up. I don't know how to post video's otherwise I would post that as well.

hollandermotorsports · Mon Oct 19, 2015 6:49 am

: 12109794_1118845914809865_5825316223373919752_o.jpg (60.12 KiB) Viewed 1452 times

We did a studio photo shoot for some upcoming magazine media stuff also a interview and photo shoot for the SCORE magazine. The bronco will have the centerfold in the hard copy Score Baja 1000 program as well from what we were told. Now the to do list is small. It is getting upgraded steering, CHO beams and radius arm combo, Custom intake system, Dyno tune, dial in shocks and then it will be go time. There is a high chance the Bronco will be on display at SEMA provided we get the list done in a timely fashion. Then off to prerun the 1000

Bajaluv · Post by **Bajaluv** » Mon Oct 19, 2015 6:54 am

Looks sexy, great photo to enjoy with my morning coffee.

rdcjuanb · Post by **rdcjuanb** » Mon Oct 19, 2015 9:42 am

What did you do to modify the heater/fan box for the 37s if anything?

hollandermotorsports · Mon Oct 19, 2015 10:10 am

rdcjuanb wrote:What did you do to modify the heater/fan box for the 37s if anything?

Nothing yet. My current front end is pushed way forward in the quest for longer wheel base lol. Like I said I have new beams and radius arms going on and we will see then this new set up will be built for the truck on the truck trying to get it as low as possible so it will change. Usually you trim the corner off and re cap but I may have to go vintage air.

hollandermotorsports · Mon Nov 02, 2015 1:57 pm

: 12196187_1126004544094002_8005831010562415_n.jpg (44.94 KiB) Viewed 1311 times

: 12187861_1126004617427328_4515216554609969630_n.jpg (50.16 KiB) Viewed 1311 times

: 12065955_1126004520760671_2996439543297038241_n.jpg (37.77 KiB) Viewed 1311 times

: 12065657_1126004580760665_6732135487230996208_n.jpg (39.37 KiB) Viewed 1311 times

: 11218879_1126004634093993_9197220542499241188_n.jpg (47.74 KiB) Viewed 1311 times

: 11201899_1126004560760667_7411716465642415457_n.jpg (41.86 KiB) Viewed 1311 times

Here is some more pics of the Bronco from the photo shoot. I am pretty pumped she is now registered street legal lol.

tcm glx · Post by **tcm glx** » Mon Nov 02, 2015 2:09 pm

Looks awesome Brandon!! Love the dual antenna. That last picture, looks like a scale car. Well done on the entire build!!

PaleRider · Post by **PaleRider** » Mon Nov 02, 2015 4:50 pm

Nice pics!

Dezertbronco · Post by **Dezertbronco** » Mon Nov 02, 2015 7:20 pm

Will this be at SEMA? If so what booth #

hollandermotorsports · Mon Nov 02, 2015 9:26 pm

No sema display this year. My schedule is way too hectic to go for the week. I'm flying out on Thursday for a couple days of networking at sema though. We have some great partners on our builds but always nice to make new connections.

damon1272 · Post by **damon1272** » Sun Nov 08, 2015 10:58 pm

I saw the Unicorn!!
Saw you driving through town tonight. Truck looks great. Those bedside look awesome too. Very nice.

hollandermotorsports · Mon Nov 09, 2015 9:31 am

damon1272 wrote:I saw the Unicorn!!
Saw you driving through town tonight. Truck looks great. Those bedside look awesome too. Very nice.

Thank you. Ya we took a drive up to Ramona yesterday. Just putting miles on it. My grandparents had not seen it since the day I bought it so I had to get grandpas seal of approval.

hollandermotorsports · Thu Jan 14, 2016 10:20 am

Well the Bronco is loaded up and we are heading to the Dyno today. I cannot wait to see what kind of magic we can work on it today.

: 12493460_1163802060314250_6247666743165859073_o.jpg (96.06 KiB) Viewed 914 times

zachwabbit · Post by **zachwabbit** » Thu Jan 14, 2016 12:10 pm

Dang that thing looks good

Wanna get me some GT sponsorship decals and tires? Lol

RyanDS650X · Post by **RyanDS650X** » Thu Jan 14, 2016 12:49 pm

So whats all in it and we can throw out some guesses on HP and TQ?!

funinthesun95 · Post by **funinthesun95** » Thu Jan 14, 2016 2:10 pm

hollandermotorsports wrote:Its a 1996 5.8 roller block with cam, GT-40 heads with some porting, 24lb injectors, 1.6 Ford svo roller rockers, and some other goodies. My buddy that assembled said he believes it should be an easy 400-450hp after dyno tuned.

Ryan ....I think it my have a few more option like the headers etc now

RyanDS650X · Post by **RyanDS650X** » Thu Jan 14, 2016 2:18 pm

"Some other goodies" to be north of 400hp at the wheels... I hope it delivers!

hollandermotorsports · Thu Jan 14, 2016 2:27 pm

Lol. I'm hoping for reliable 400hp. If not 408 it will become.