BronCoyote

[Wrightracing.net]

Money and your Fabrication abilities are the limiting factor. AutoFab, Complete Fabrication, Solo MotorSports and a couple others on here could build you a proven go fast setup.

[djyaz]

I'm gonna see what about $3K can get me in terms of mostly plug/play suspension upgrades. Thanks for all the info, will research further! Also need to complete (and pay for) all these motor mods before I tackle suspension. Goal is to have a race ready truck by July for the Gambler 500.

[djyaz]

Couple new pics today, nothing too exciting. Took off front end and got flywheel/clutch installed on engine. http://broncoyote.businesscatalyst.com/pictures.html

[Hauls Assington]

For 3k you could do some deaver J40's in the back, Threat motorsports shock mount, and some good 2.5"x12" stroke shocks in the back, with threat shackles.

In front, you might talk to Threat motorsports, or solo about some c&t beams.

You can spend insane amounts of money on suspension!

Front coilovers are pretty expensive, and require some serious fabrication, or expense on coilover mounts from spirit, southwest, or a solo motorsports engine cage.

I am pretty new to this stuff, and I am getting close to finishing my bronco, you can check out my build thread, "The Beast".

[djyaz]

Helpful, thanks!

[birdco85]

Yeah those coil over towers/buckets seem to be a more universal mount like you'd buy from poly performance or ruff stuff. The autofab ones look quite a bit different.

ImageUploadedByTapatalk1419733752.476961.jpg (251.87 KiB) Viewed 975 times

ImageUploadedByTapatalk1419733742.246693.jpg (258.42 KiB) Viewed 975 times

ImageUploadedByTapatalk1419733652.216797.jpg (282.07 KiB) Viewed 975 times

[Rmc]

Nice! Can't go wrong with autofab.

[djyaz]

Can you post more pics of this with shocks mounted? Also links/prices helpful. I know nothing about building suspension and the threads about it are seem to be like 20 pages deep with a lot of ADHD. I'm looking for the the simple rugged complete setup.

[birdco85]

The autofab buckets retail for $1200. They bolt right up to the stock bucket holes. Mount a 14" shock.

[Wrightracing.net]

I have to agree, Autofab A+++

[djyaz]

Would I need to alter my fenders to accommodate the wheel travel? Anything other parts I'd need to change?

[Nick]

Bringing this back up. Anyone know if this build ever came to life?

[djyaz]

It did

Some pics...
http://broncoyote.businesscatalyst.com/pictures.html

Some videos of it in action...
https://www.youtube.com/watch?v=uV01EysAnbs
https://www.youtube.com/watch?v=Y0sgtZ0TdjI
https://www.youtube.com/watch?v=DYeijmefS88
https://www.youtube.com/watch?v=t5JZVN2rjMY

Still need to dramatically upgrade the suspension.

[Nick]

Nice!