Kritter's 96 Bronco

Posts: 1033
Joined: Wed Feb 17, 2010 11:50 am
Location: San Dimas

Re: Kritter's 96 Bronco

Postby shockseals.com » Wed Jan 21, 2015 12:12 pm

80 series land cruiser. Its a centrifugal filter housing with a silt canister on the bottom that is removable to dump silt out. I have the adapter plate drawn up if you want the dxf file.

Basura Blanca
Posts: 5652
Joined: Tue Dec 08, 2009 9:37 am
Bronco Info: A pile of crap.

Location: Bullhead, AZ

Re: Kritter's 96 Bronco

Postby philofab » Wed Jan 21, 2015 12:17 pm

shockseals.com wrote:80 series land cruiser. Its a centrifugal filter housing with a silt canister on the bottom that is removable to dump silt out. I have the adapter plate drawn up if you want the dxf file.


I appreciate it but I don't run a MAF so the adapter plate would not work for me.

Spy/Ninja
Posts: 8579
Joined: Thu Jan 28, 2010 9:46 am
Bronco Info: Don't have one - just old Ford trucks

Location: Huntington Beach, CA

Re: Kritter's 96 Bronco

Postby ChaseTruck754 » Wed Jan 21, 2015 1:08 pm

That air cleaner is pretty cool.

What are rough dimensions of the box, & how big is the air tube where it attaches? Looking at pics I'd guess about 3"???


I'm getting to the point where I want to figure something out for my crew & if I can grab one of these vs. fab something I might.

Posts: 1033
Joined: Wed Feb 17, 2010 11:50 am
Location: San Dimas

Re: Kritter's 96 Bronco

Postby shockseals.com » Wed Jan 21, 2015 1:48 pm

ChaseTruck754 wrote:That air cleaner is pretty cool.

What are rough dimensions of the box, & how big is the air tube where it attaches? Looking at pics I'd guess about 3"???


I'm getting to the point where I want to figure something out for my crew & if I can grab one of these vs. fab something I might.


The tube to adapt to is pretty damn close to the stock bronco diameter...within an 1/8". I don't have the thing here to measure OA dimensions of the box. The land cruiser filter per wix is good to 560cfm vs the stock bronco filter wix claims at 320cfm which is good to know.

Spy/Ninja
Posts: 8579
Joined: Thu Jan 28, 2010 9:46 am
Bronco Info: Don't have one - just old Ford trucks

Location: Huntington Beach, CA

Re: Kritter's 96 Bronco

Postby ChaseTruck754 » Wed Jan 21, 2015 3:36 pm

Thanks for the info. I've looked a bit online to try & find sizes etc. but haven't found much yet.

It would be going in front of an inline 6 turbo diesel. That can is just similar to what I was contemplating making.

I guess I'll look up what the cfm is for the cummins stock filters & see if this thing is anywhere close.

Posts: 2734
Joined: Wed Dec 22, 2010 10:39 am
Bronco Info: 94 5.8 Bronco w/dreams of being finished

Re: Kritter's 96 Bronco

Postby cs_drums » Wed Jan 21, 2015 7:20 pm

I think you just made ump loose some money. I'm gonna go this route fo sho

Posts: 113
Joined: Wed Jan 05, 2011 12:32 am
Bronco Info: 408 Prerunner

Location: Huntington Beach, CA

Re: Kritter's 96 Bronco

Postby motoxscott » Wed Jan 21, 2015 10:32 pm

Looking good .... one of these days I'll get out there and join you haha

- Scott

Admin
Posts: 5911
Joined: Sat Dec 05, 2009 10:25 am
Bronco Info: It's an Explorer!

Location: Arroyo Grande, CA

Re: Kritter's 96 Bronco

Postby SteveG » Wed Jan 21, 2015 10:43 pm

Just when I thought I couldn't like this truck any more....

Posts: 1033
Joined: Wed Feb 17, 2010 11:50 am
Location: San Dimas

Re: Kritter's 96 Bronco

Postby shockseals.com » Fri Apr 17, 2015 8:52 am

Nothing too exciting but I got the KC cyclones mounted using the OEM power with a switch and washer bottle/pump mounted between air cleaner and fuse panel. The hood light off the factory power is nice since it will time out if left on too long. Now I just need to run the water lines for the squirters and its ready to rip...other than a timing cover coolant leak.
Attachments
IMG_9089.JPG
IMG_9089.JPG (182.76 KiB) Viewed 3393 times

Peanut Butter
Posts: 7199
Joined: Tue Dec 08, 2009 11:19 am
Bronco Info: 93 Ford Bronco 5.8

Location: Riverside Ca

Re: Kritter's 96 Bronco

Postby tcm glx » Fri Apr 17, 2015 8:57 am

Those are bright!! Lookin good

Peanut Butter
Posts: 7199
Joined: Tue Dec 08, 2009 11:19 am
Bronco Info: 93 Ford Bronco 5.8

Location: Riverside Ca

Re: Kritter's 96 Bronco

Postby tcm glx » Fri Apr 17, 2015 9:13 am

How'd you mount them? Self tapping screws?

Posts: 1033
Joined: Wed Feb 17, 2010 11:50 am
Location: San Dimas

Re: Kritter's 96 Bronco

Postby shockseals.com » Fri Apr 17, 2015 9:24 am

Dorman 5/16 screw in plastic rivets. They rotate a bit but they are tight to the glass and I tugged on them pretty good and they wouldn't come out. 8 days in Baja will be the decider if they are strong enough!

Posts: 1595
Joined: Mon Mar 03, 2014 8:45 am
Bronco Info: 1996 EB 351W!! First Bronco!! Plan: Prerunner/ Trail Rig/ SHTF All around Rig

Re: Kritter's 96 Bronco

Postby dtbback » Wed Jun 17, 2015 9:04 pm

We're you ever able to pull rough dimensions on the land cruiser air box?

Posts: 1033
Joined: Wed Feb 17, 2010 11:50 am
Location: San Dimas

Re: Kritter's 96 Bronco

Postby shockseals.com » Thu Oct 01, 2015 9:05 pm

Got it all painted and lowered it a little. Just need to do the steering column bearing rebuild and get Tony's projector hid lights installed. Baja bound soon.
Attachments
image.jpeg
image.jpeg (1.77 MiB) Viewed 1933 times

Peanut Butter
Posts: 7199
Joined: Tue Dec 08, 2009 11:19 am
Bronco Info: 93 Ford Bronco 5.8

Location: Riverside Ca

Re: Kritter's 96 Bronco

Postby tcm glx » Thu Oct 01, 2015 9:07 pm

Those fenders!!! Looking good Kris

Posts: 1033
Joined: Wed Feb 17, 2010 11:50 am
Location: San Dimas

Re: Kritter's 96 Bronco

Postby shockseals.com » Fri Oct 02, 2015 8:14 am

that's lame it loaded the pic sideways from my iphone...

moderators can you fix that?

Admin
Posts: 5911
Joined: Sat Dec 05, 2009 10:25 am
Bronco Info: It's an Explorer!

Location: Arroyo Grande, CA

Re: Kritter's 96 Bronco

Postby SteveG » Sat Oct 03, 2015 4:00 am

That's odd. It's right side up for me.

Posts: 852
Joined: Fri Oct 28, 2011 10:01 pm
Bronco Info: 96 bronco

Re: Kritter's 96 Bronco

Postby Seabass » Sat Oct 03, 2015 3:41 pm

Sideways for me on my phone and computer.

Posts: 2734
Joined: Wed Dec 22, 2010 10:39 am
Bronco Info: 94 5.8 Bronco w/dreams of being finished

Kritter's 96 Bronco

Postby cs_drums » Sat Oct 03, 2015 4:30 pm

It's right side up in my phone. Looks good total sleeper

Posts: 1033
Joined: Wed Feb 17, 2010 11:50 am
Location: San Dimas

Re: Kritter's 96 Bronco

Postby shockseals.com » Mon Oct 19, 2015 9:23 pm

I got a pair of Tony's retrofit lights and a fresh set of BFG shoes...almost ready for Baja this weekend.


Return to “Big Broncos”

Who is online

Users browsing this forum: No registered users and 2 guests