motoxscott's multi year bronco project ...
- motoxscott
- Posts: 113
- Joined: Wed Jan 05, 2011 12:32 am
- Bronco Info: 408 Prerunner
- Location: Huntington Beach, CA
- Contact:
motoxscott's multi year bronco project ...
Well I've started to work on my bronco project again .. if you're not familiar with it I've been building it since 2007 at different stages and it hasn't left the shop since summer 2008.
Here's a very detailed build thread on it, but I figured I would start one on here since most have moved over here. If you have free time, you can go read the 19 pages of updates haha. The short story is .... '95 bronco gutted, race truck parts, 408 engine, still not done.
http://www.fullsizebronco.com/forum/sho ... p?t=105377
Here's my latest updates .....
A few months back started the tube work firewall forward and setup all the shock mounts. A ton of time cycling the suspension and getting the mounting positions perfect for both sides to match.
Had to come up with a new mount for the LEE trophy truck power steering pump since one doesn't exist.
Last weekend ..... Front tube work is welded in and I made a removable cross tube and strut bar structure so the engine can be pulled out without cutting tubes out in the way.
Here's a very detailed build thread on it, but I figured I would start one on here since most have moved over here. If you have free time, you can go read the 19 pages of updates haha. The short story is .... '95 bronco gutted, race truck parts, 408 engine, still not done.
http://www.fullsizebronco.com/forum/sho ... p?t=105377
Here's my latest updates .....
A few months back started the tube work firewall forward and setup all the shock mounts. A ton of time cycling the suspension and getting the mounting positions perfect for both sides to match.
Had to come up with a new mount for the LEE trophy truck power steering pump since one doesn't exist.
Last weekend ..... Front tube work is welded in and I made a removable cross tube and strut bar structure so the engine can be pulled out without cutting tubes out in the way.
- motoxscott
- Posts: 113
- Joined: Wed Jan 05, 2011 12:32 am
- Bronco Info: 408 Prerunner
- Location: Huntington Beach, CA
- Contact:
Re: motoxscott's multi year bronco project ...
a few other random recent pics .....
- Kel Fab Creations
- Posts: 727
- Joined: Wed Nov 23, 2011 2:01 pm
- Bronco Info: 95 Bronco
- Location: San Jacinto, Ca
- Contact:
Re: motoxscott's multi year bronco project ...
Glad to see a thread over here now and it being worked on again. Keep the ball rolling! Awesome work.
- SteveG
- Admin
- Posts: 6099
- Joined: Sat Dec 05, 2009 10:25 am
- Bronco Info: Wilson: 96, Stretched 17.5", coil-overs / Bypasses, 4-link, a fridge and all the amenities :)
- Location: Arroyo Grande, CA
Re: motoxscott's multi year bronco project ...
Hey, Scott! The Bronco is looking insane! I have been looking forward to seeing it done... for years. Ha!
By the way, those EFI parts you gave me finally got put to use late last year. Thanks again!
By the way, those EFI parts you gave me finally got put to use late last year. Thanks again!
- 1Hondalover
- Posts: 819
- Joined: Mon May 14, 2012 2:30 pm
- Bronco Info: Having so much fun with friends in Baja, we're not sure if we want to race NORRA.....
- Location: Santa Clarita
Re: motoxscott's multi year bronco project ...
Nicely deluxe.....is this for race or play?
- ESHALLBETTER
- Posts: 1579
- Joined: Fri Dec 11, 2009 8:49 am
- Bronco Info: 85 class 3, 70's somthing trail bronco.
- Location: Minneapolis, MN
Re: motoxscott's multi year bronco project ...
Oh yeah! It finally made it here!
Welcome!
Welcome!
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: motoxscott's multi year bronco project ...
Good to see some progress on this thing again.
Funny - I got an email saying there was a post in the thread for this on DR. I was thinking it was most likely another "any progress???" type post, but now I know it's not & will have to go look!
Funny - I got an email saying there was a post in the thread for this on DR. I was thinking it was most likely another "any progress???" type post, but now I know it's not & will have to go look!
- Becks_Bronco
- Posts: 1240
- Joined: Sun Dec 20, 2009 2:12 pm
- Bronco Info: 96 Eddie Bauer, 5.8
- Location: Antioch
Re: motoxscott's multi year bronco project ...
Awesome! Followed the original thread almost from the beginning, but lost track of it over the last couple years. Glad to see you found your way over here and decided to post up!
- Agui-E7TE
- Posts: 1483
- Joined: Sat Jul 30, 2011 2:50 am
- Bronco Info: 89 Bronco w/ 6 in. skyjacker kit w/ dual Bilstein 5150 shocks up front and Deaver F53's in the rear
Re: motoxscott's multi year bronco project ...
Last time I saw this I think I remember seeing it on 39s!! That thing is insanely awesome!! I probably spent at least a half our drooling over it last time I was there. Glad to see more work getting done on it.
- TrevorPiggott
- Posts: 134
- Joined: Thu Dec 10, 2009 2:16 pm
- Bronco Info: 99 F250 and a 1994 I started building but spends too much time sitting untouched...
- Location: Folsom,CA
Re: motoxscott's multi year bronco project ...
I was so excited when I saw the new pics in another thread the other day, you truly are an artist Scott. Can't wait to see future updates
- motoxscott
- Posts: 113
- Joined: Wed Jan 05, 2011 12:32 am
- Bronco Info: 408 Prerunner
- Location: Huntington Beach, CA
- Contact:
Re: motoxscott's multi year bronco project ...
Thanks for support haha
Worked on it today some more. Made the sheet metal plates for the a-pilars, just need to weld them in, but since I can't TIG weld I gotta wait till after the Mint for jason to weld them in for me. Also added a couple tubes to the bumper/engine cage to tie everything in more. Back at it tomorrow hopefully.
Worked on it today some more. Made the sheet metal plates for the a-pilars, just need to weld them in, but since I can't TIG weld I gotta wait till after the Mint for jason to weld them in for me. Also added a couple tubes to the bumper/engine cage to tie everything in more. Back at it tomorrow hopefully.
-
- Posts: 2912
- Joined: Wed Dec 22, 2010 10:39 am
- Bronco Info: 94 5.8 Bronco w/dreams of being finished
Re: motoxscott's multi year bronco project ...
You gonna dimple the plates?
- motoxscott
- Posts: 113
- Joined: Wed Jan 05, 2011 12:32 am
- Bronco Info: 408 Prerunner
- Location: Huntington Beach, CA
- Contact:
Re: motoxscott's multi year bronco project ...
Made some progress today .... mounted up the original core, supports and headlight/grill so I can start mounting the radiator, coolers and build the tube structure to hold the headlight panel, etc.
- TrevorPiggott
- Posts: 134
- Joined: Thu Dec 10, 2009 2:16 pm
- Bronco Info: 99 F250 and a 1994 I started building but spends too much time sitting untouched...
- Location: Folsom,CA
Re: motoxscott's multi year bronco project ...
Scott, when you update your thread, my quality of life improves. Please keep the updates coming.
Needless to say, GREAT work.
Needless to say, GREAT work.
- ESHALLBETTER
- Posts: 1579
- Joined: Fri Dec 11, 2009 8:49 am
- Bronco Info: 85 class 3, 70's somthing trail bronco.
- Location: Minneapolis, MN
Re: motoxscott's multi year bronco project ...
I can't wait to see this thing finished! Looking good Scott.
- SteveG
- Admin
- Posts: 6099
- Joined: Sat Dec 05, 2009 10:25 am
- Bronco Info: Wilson: 96, Stretched 17.5", coil-overs / Bypasses, 4-link, a fridge and all the amenities :)
- Location: Arroyo Grande, CA
Re: motoxscott's multi year bronco project ...
It's starting to resemble a complete truck... looking good!
- motoxscott
- Posts: 113
- Joined: Wed Jan 05, 2011 12:32 am
- Bronco Info: 408 Prerunner
- Location: Huntington Beach, CA
- Contact:
Re: motoxscott's multi year bronco project ...
Used some flat strap to hold the headlight/grill panel exactly in place so I could remove the factory core and supports. Now time to mount the radiator and build a tube structure to mount coolers and the headlight/grill panel.
Progress is being made one step at a time haha ...
Progress is being made one step at a time haha ...
- motoxscott
- Posts: 113
- Joined: Wed Jan 05, 2011 12:32 am
- Bronco Info: 408 Prerunner
- Location: Huntington Beach, CA
- Contact:
Re: motoxscott's multi year bronco project ...
Haven't posted pics here lately, mostly on instagram so all my friends know why I haven't been around and live at the shop haha. Just finishing up the radiator and cooler mounting, then I can finish up a few tubes here and there to help support the grill/headlight panel and front fenders.
- ESHALLBETTER
- Posts: 1579
- Joined: Fri Dec 11, 2009 8:49 am
- Bronco Info: 85 class 3, 70's somthing trail bronco.
- Location: Minneapolis, MN
Re: motoxscott's multi year bronco project ...
Looks great man. I like how all the tube work for mounting radiators and coolers is all bolt on.
-
- Posts: 4
- Joined: Wed May 29, 2013 3:52 am
- Bronco Info: 95 302 e4od 4.10 gears 35" goodyears pos trail truck/ only allowed to buy used parts for it
Re: motoxscott's multi year bronco project ...
great looking project, now you just need to find time to finish it up. nice fab work and very well planned out.