Project Double Trouble/Drew's Bronco
- Wrightracing.net
- Posts: 2209
- Joined: Thu Oct 28, 2010 9:58 pm
- Bronco Info: 1972 Bronco with an 86 chassis, full cage and Long travel coil-over suspension.
- Location: San Diego
- Contact:
Project Double Trouble/Drew's Bronco
Ok, I see it know. The bend on the outer tube after the tube comes out of the fire wall goes down and I thought it looked like it went in towards the booster. That is why I asked. My mistake.
On my next project I will be doing mine similar to yours with 16" coilovers and 16" dampening shocks kicked back between the tubes. In my case I am running a custom mounted hydroboost brake system to clear the cage and shocks.
On my next project I will be doing mine similar to yours with 16" coilovers and 16" dampening shocks kicked back between the tubes. In my case I am running a custom mounted hydroboost brake system to clear the cage and shocks.
-
- El Jefe
- Posts: 6026
- Joined: Tue Oct 09, 2012 10:22 pm
- Bronco Info: 94 bronco xlt prerunner
- Location: IE SoCal
- Contact:
Re: Project Double Trouble/Drew's Bronco
Looking good!
-
- Posts: 502
- Joined: Tue Nov 27, 2012 1:18 pm
- Bronco Info: Rhonda the Bronco is her name, shredding dirt is her game.
- Location: Modesto, CA
Re: Project Double Trouble/Drew's Bronco
picked up a few things at the swap meet. i was really looking for a rear seat but could not find much.
here are a few of my spoils
Currie 9+ race housing, with 35 spline spool and fresh 4.88 gears.
set of 5 Method MR306 wheels with a much better backspacing than my current 6.25.
i also picked up a 2 pin fiberglass hood so i do not have to hack up my current hood for engine cage clearance, also eliminating the uneeded weight of the steel hood.
no pics of hood though.
here are a few of my spoils
Currie 9+ race housing, with 35 spline spool and fresh 4.88 gears.
set of 5 Method MR306 wheels with a much better backspacing than my current 6.25.
i also picked up a 2 pin fiberglass hood so i do not have to hack up my current hood for engine cage clearance, also eliminating the uneeded weight of the steel hood.
no pics of hood though.
-
- El Jefe
- Posts: 6026
- Joined: Tue Oct 09, 2012 10:22 pm
- Bronco Info: 94 bronco xlt prerunner
- Location: IE SoCal
- Contact:
Re: Project Double Trouble/Drew's Bronco
Ooo la la beautiful upgrades!
- otter
- Posts: 534
- Joined: Sun Sep 04, 2011 8:57 pm
- Bronco Info: Currently in a holding pattern
- Location: Hawaii
Re: Project Double Trouble/Drew's Bronco
Is this finally going to get done? I built and sold 2, moved off the continent and I am now in a different country and its still not done! Haha. Sorry. looking good. Get her done man.
-
- Posts: 502
- Joined: Tue Nov 27, 2012 1:18 pm
- Bronco Info: Rhonda the Bronco is her name, shredding dirt is her game.
- Location: Modesto, CA
Re: Project Double Trouble/Drew's Bronco
Getting there.... Bout shop from my buddy and had to move everything to my house.otter wrote:Is this finally going to get done? I built and sold 2, moved off the continent and I am now in a different country and its still not done! Haha. Sorry. looking good. Get her done man.