96 chase bronco

User avatar
robertcrav
Let me google that for you
Posts: 4313
Joined: Thu Jan 13, 2011 8:06 am
Bronco Info: Lana - Stock width c/t coil-overs/bypasses -- Sylvia - Stock width 4" Rancho kit on Billies
Location: South O.C.
Contact:

Re: 96 chase bronco

Post by robertcrav »

Looks good....

forgive the newb ? but how hard was it to mount the TS seats in? do they still slide/tilt forward enough to get in the back?

I just picked up a stock '96 that needs seats in the worst way, and those look comfy

Thanks,
Rob
cuz_im_CR
Posts: 129
Joined: Sun Jan 24, 2010 8:25 pm
Bronco Info: 96 xlt stock

Re: 96 chase bronco

Post by cuz_im_CR »

the seats were just bolted to the factory sliders. super easy to get in the back. i didnt even need to weld anything. you can bolt it all together. ill snap some pictures of the seat brackets before i reinstall them. the seats are made by twisted stitch.

thanks everyone for all the comments. it really means alot. ive put alot of work into this and it is almost complete. i cant wait to go on some group trips with everyone.
User avatar
only1mikey
Posts: 494
Joined: Tue Jan 25, 2011 12:06 pm
Bronco Info: 84 Bronco
Location: Simi Valley, CA

Re: 96 chase bronco

Post by only1mikey »

Image

Image

Little bit of work so far. Been hustling of this thing quite a bit over the last 6 days or so.

Trying to get it done for Chris ASAP.

Mike
BajaBronco13
Bronco Broker
Posts: 2434
Joined: Tue Dec 08, 2009 11:00 am
Bronco Info: Bronco AKA The Silver Bullet
Location: Orange County, California

Re: 96 chase bronco

Post by BajaBronco13 »

Sweet Jesus! That thing is turning out awesome!
User avatar
Andy Jones
Posts: 2205
Joined: Tue Dec 08, 2009 2:47 pm
Bronco Info: In the Works!
Location: Canyon Lake,ca
Contact:

Re: 96 chase bronco

Post by Andy Jones »

Dang! Looks Good Guys.
dont PM me.. I don't get them on Taptalk
User avatar
funinthesun95
Posts: 1701
Joined: Thu May 13, 2010 2:06 pm
Bronco Info: 1992 Bronco MAF UsShift
Location: San Diego
Contact:

Re: 96 chase bronco

Post by funinthesun95 »

very nice work....
Good people + Great info = GFB
@csracingteam
@Cockstarmotorsports
cuz_im_CR
Posts: 129
Joined: Sun Jan 24, 2010 8:25 pm
Bronco Info: 96 xlt stock

Re: 96 chase bronco

Post by cuz_im_CR »

well there isnt any updates on this thing until after easter but in the meantime i bought another bronco.....v :roll: :lol:

not sure what the plans are with it yet but i picked it up for a smoking deal. its a 1990 with a 408 stroker crate engine from speedomotive. has a culhane built trans. 9" with 410 gears. rancho lift and a ton of other things im sure im forgetting. i need to find some wheels and tires for it because someone decided to steal the ones on it.

this thing should be a blast to drive once i get it on all 4.
Attachments
goldmember.jpg
goldmember.jpg (106.57 KiB) Viewed 1285 times
User avatar
ChaseTruck754
Spy/Ninja
Posts: 9194
Joined: Thu Jan 28, 2010 9:46 am
Bronco Info: Don't have one - just old Ford trucks
Location: Huntington Beach, CA

Re: 96 chase bronco

Post by ChaseTruck754 »

It's weird, but I kinda dig the goldmember theme...
Owner of only dead and forgotten projects
User avatar
SteveG
Admin
Posts: 6100
Joined: Sat Dec 05, 2009 10:25 am
Bronco Info: Wilson: 96, Stretched 17.5", coil-overs / Bypasses, 4-link, a fridge and all the amenities :)
Location: Arroyo Grande, CA

Re: 96 chase bronco

Post by SteveG »

I was just going to say the same thing. The gold and color-matched fender flares kinda work.

Bummer about the wheels.
Sho nuff,
SteveG
User avatar
ChaseTruck754
Spy/Ninja
Posts: 9194
Joined: Thu Jan 28, 2010 9:46 am
Bronco Info: Don't have one - just old Ford trucks
Location: Huntington Beach, CA

Re: 96 chase bronco

Post by ChaseTruck754 »

Check the blingy mirrors too.

Gaudy for sure but it somehow just works!
Owner of only dead and forgotten projects
User avatar
robertcrav
Let me google that for you
Posts: 4313
Joined: Thu Jan 13, 2011 8:06 am
Bronco Info: Lana - Stock width c/t coil-overs/bypasses -- Sylvia - Stock width 4" Rancho kit on Billies
Location: South O.C.
Contact:

96 chase bronco

Post by robertcrav »

I love Goooooooooooold
User avatar
lugobean
Posts: 53
Joined: Mon Feb 27, 2012 4:54 pm
Bronco Info: stocker 94 xlt with 351w and e40d. nothin special... yet!
Location: Simi Valley, CA

96 chase bronco

Post by lugobean »

I dig both these broncos! The cage is awesome and I really like the boxing for the wells. And the gold (like everyone else says) just works!
Chris Lugo
User avatar
Andy Jones
Posts: 2205
Joined: Tue Dec 08, 2009 2:47 pm
Bronco Info: In the Works!
Location: Canyon Lake,ca
Contact:

Re: 96 chase bronco

Post by Andy Jones »

Sorry Chris.. I stole your wheels! Whoopsie!!

Sent from my T-Mobile G1 using Tapatalk
dont PM me.. I don't get them on Taptalk
User avatar
Wood
Posts: 82
Joined: Wed Dec 09, 2009 1:30 am
Bronco Info: 1992 Bronco
Location: San Jose, CA

96 chase bronco

Post by Wood »

That thing looks toight like toiger
User avatar
ESHALLBETTER
Posts: 1579
Joined: Fri Dec 11, 2009 8:49 am
Bronco Info: 85 class 3, 70's somthing trail bronco.
Location: Minneapolis, MN

Re: 96 chase bronco

Post by ESHALLBETTER »

I like the gold! You need to keep it! I was kind of in the same boat when I bought my bronco. It was a cherry red marbleized body with a purple/red top!
cuz_im_CR
Posts: 129
Joined: Sun Jan 24, 2010 8:25 pm
Bronco Info: 96 xlt stock

Re: 96 chase bronco

Post by cuz_im_CR »

looks like ill be able to pick the bronco up from mikey (only1mikey) next weekend. then i still have alot more work to do to make it clean.

here is a couple pics mikey sent me of the finished tubs. im going to have it rhino lined professionally inside and out around the tubs. im super happy with the work mikey did on these.
Attachments
broncotub.jpg
broncotub.jpg (196 KiB) Viewed 1191 times
bronco.jpg
bronco.jpg (244 KiB) Viewed 1191 times
D1cker1
Posts: 1255
Joined: Mon Nov 29, 2010 10:44 pm
Bronco Info: 93 EB Bronco 12"Over 40" BFG projects 5.13 gears in a 8.8... 1 seat and stripped Interior
Location: ORANGE CUNTY, COMIFORNIA وس إنجليزي - عربي

Re: 96 chase bronco

Post by D1cker1 »

The cage looks awesome the way eveything is boxed in...
me Like
Integrity, Money, Relevance
1amD1cker1@gmail.com
cuz_im_CR
Posts: 129
Joined: Sun Jan 24, 2010 8:25 pm
Bronco Info: 96 xlt stock

Re: 96 chase bronco

Post by cuz_im_CR »

so i picked the bronco up from mikey friday night. im really excited to get this thing out to the desert. have alot of things to do before its ready but its ok because i just finished up my ranger today so i have a toy while im making the bronco clean...

here is a small list of thing i need to do still

-mount bedsides
-re align hood
-beam pivot bushing are shot
-new heims
-limit straps
-silicone tubs
-dynamat interior
-carpet tubs and cargo area
-new driveline
-install mechanical fan and shroud
-cats and O2 sensor
-smog

im sure im forgetting stuff. im excited though and i cant wait to take it out
Attachments
broncotub2.jpg
broncotub2.jpg (39.64 KiB) Viewed 1103 times
broncotrailer.jpg
broncotrailer.jpg (35.52 KiB) Viewed 1103 times
bronco garage.jpg
bronco garage.jpg (54.74 KiB) Viewed 1103 times
broncoinside.jpg
broncoinside.jpg (70.7 KiB) Viewed 1103 times
cuz_im_CR
Posts: 129
Joined: Sun Jan 24, 2010 8:25 pm
Bronco Info: 96 xlt stock

Re: 96 chase bronco

Post by cuz_im_CR »

a couple more
Attachments
here is the ranger i have to keep me entertained while i work on the bronco. i just installed a giant 64 kit and giant 7.5 over beams
here is the ranger i have to keep me entertained while i work on the bronco. i just installed a giant 64 kit and giant 7.5 over beams
ranger2.jpg (83.31 KiB) Viewed 1103 times
all the trucks together
all the trucks together
thefleet.jpg (86.53 KiB) Viewed 1103 times
D1cker1
Posts: 1255
Joined: Mon Nov 29, 2010 10:44 pm
Bronco Info: 93 EB Bronco 12"Over 40" BFG projects 5.13 gears in a 8.8... 1 seat and stripped Interior
Location: ORANGE CUNTY, COMIFORNIA وس إنجليزي - عربي

Re: 96 chase bronco

Post by D1cker1 »

all white... lol
bronco is looking good.. and 6 days for a cage..
Integrity, Money, Relevance
1amD1cker1@gmail.com
Post Reply