Full Build Bronco 550HP

Post Reply
User avatar
Dan88Rigid
Posts: 91
Joined: Tue Jun 26, 2012 10:57 pm
Bronco Info: Full build by Jason Rivera from Race Truck Factory.

Full Build Bronco 550HP

Post by Dan88Rigid »

Alright finally had a chance to post up on here since everyone i run into asks if i have posted anything yet.

This Bronco is a ground up build. Basically just the cab and frame are left. It started out as an 89 but is being converted to a 92-96 front clip. Jason from Race Truck Factory is doing the build. Below is a list of this being done to it and some companies that have helped out with product on the build.

Powertrain
- LQ4 6.0 w/ L92 heads and Lunati Cam
- Alper Motorsports for all my LS Accessories
- Th400 Transmission and Np205 Transfer case
- Tubeworks rearend (full floater)

Suspension
- King Shocks
Front
- 2.5 Coilover and Bypass
Rear
- 2.5 Coilover and 3.0 Bypass
- 5" over TTB beams

Accessories Lights, Wheels, Seats, Etc
- Rigid Industries - LED Lighting
- Jamar Performance (Trophy Truck Brake Package)
- PRP Podium Racing Seats
- BTR Beadlock Wheels
- Artec Industries Quart Crates
- AO Coolers
- Al's Liner DIY
- Signal Dynamics
- Yukon Gear & Axle
- BFG 37" projects
- PSI Conversion standalone wiring harnesses
- Trek Armor
- PCI Race Radio
- Tuff Stuff Xtreme 12,500lb Waterproof Winch

Fiberglass
- Perrys Fab N Fiber/Mcneil Racing
Front Fenders - 6" over
Rear Bedsides - 6" over

The Pictures posted below are the up to date photos some will be old and some will be newer.
If anyone is looking to have a cage built or some simple stuff hit up Jason Rivera at Race Truck Factory 951-415-0235 located in Montclair, Ca. He does amazing work and is actually affordable.
If anyone has any input or has some cool new things i dont know about please feel free to comment.
photo(4).JPG
photo(4).JPG (268.49 KiB) Viewed 4987 times
photo(5).JPG
photo(5).JPG (264.51 KiB) Viewed 4987 times
photo(14).JPG
photo(14).JPG (245.9 KiB) Viewed 4987 times
2011-07-12_13-24-59_875.jpg
2011-07-12_13-24-59_875.jpg (160.32 KiB) Viewed 4987 times
Last edited by Dan88Rigid on Tue Jan 22, 2013 10:14 pm, edited 8 times in total.
Rigid Industries - LED Lighting http://www.rigidindustries.com/
JAMAR Brakes http://www.jamarperformance.com/
Artec Industries http://www.artecindustries.com/
TubeWorks Rearends
TUFF STUFF Winches
Race Truck Factory
Alper Motorsports
Trek Armor
Top
User avatar
Dan88Rigid
Posts: 91
Joined: Tue Jun 26, 2012 10:57 pm
Bronco Info: Full build by Jason Rivera from Race Truck Factory.

Re: Dan's Full Build Bronco

Post by Dan88Rigid »

photo(6).JPG
photo(6).JPG (258.73 KiB) Viewed 4985 times
IMG_20110817_134233.jpg
IMG_20110817_134233.jpg (207.2 KiB) Viewed 4985 times
IMG_20110816_212018.jpg
IMG_20110816_212018.jpg (230.78 KiB) Viewed 4985 times
IMG_20110816_211945.jpg
IMG_20110816_211945.jpg (257.66 KiB) Viewed 4985 times
Rigid Industries - LED Lighting http://www.rigidindustries.com/
JAMAR Brakes http://www.jamarperformance.com/
Artec Industries http://www.artecindustries.com/
TubeWorks Rearends
TUFF STUFF Winches
Race Truck Factory
Alper Motorsports
Trek Armor
Top
User avatar
Dan88Rigid
Posts: 91
Joined: Tue Jun 26, 2012 10:57 pm
Bronco Info: Full build by Jason Rivera from Race Truck Factory.

Re: Dan's Full Build Bronco

Post by Dan88Rigid »

photo(10).JPG
photo(10).JPG (238.15 KiB) Viewed 4985 times
photo(13).JPG
photo(13).JPG (61.11 KiB) Viewed 4985 times
photo(11).JPG
photo(11).JPG (241.24 KiB) Viewed 4985 times
photo(9).JPG
photo(9).JPG (234.5 KiB) Viewed 4985 times
Rigid Industries - LED Lighting http://www.rigidindustries.com/
JAMAR Brakes http://www.jamarperformance.com/
Artec Industries http://www.artecindustries.com/
TubeWorks Rearends
TUFF STUFF Winches
Race Truck Factory
Alper Motorsports
Trek Armor
Top
User avatar
Rwies
Posts: 301
Joined: Sun Dec 20, 2009 5:19 pm
Bronco Info: 93 Bronco
Location: West Covina, CA

Re: Dan's Full Build Bronco

Post by Rwies »

Looking good Dan! Glad to see you guys are back at it...I gotta swing by the shop and check it out. I don't think Ive been by since we finished my cage.
Top
User avatar
economig
Posts: 1101
Joined: Sun Jan 09, 2011 5:15 am
Bronco Info: 1994 Eddie Bauer 5.8L
Location: SW Riverside County

Dan's Full Build Bronco

Post by economig »

looks nice. what's the wheel base?

rumored to be an LS3? that's weird :)

can't wait to see this thing, it looks pretty awesome. I really like the front upper shock mounts the most
T H R E A T Motorsports
Top
User avatar
ESHALLBETTER
Posts: 1579
Joined: Fri Dec 11, 2009 8:49 am
Bronco Info: 85 class 3, 70's somthing trail bronco.
Location: Minneapolis, MN

Re: Dan's Full Build Bronco

Post by ESHALLBETTER »

F'in sweet.
Top
User avatar
Dan88Rigid
Posts: 91
Joined: Tue Jun 26, 2012 10:57 pm
Bronco Info: Full build by Jason Rivera from Race Truck Factory.

Re: Dan's Full Build Bronco

Post by Dan88Rigid »

economig here's a better pic of the front shock mounts
296857_2392142051275_1321528131_n.jpg
296857_2392142051275_1321528131_n.jpg (84.58 KiB) Viewed 4950 times
296857_2392142051275_1321528131_n.jpg
296857_2392142051275_1321528131_n.jpg (84.58 KiB) Viewed 4950 times
Attachments
296744_275452335815770_2010387615_n.jpg
296744_275452335815770_2010387615_n.jpg (86.45 KiB) Viewed 4949 times
Rigid Industries - LED Lighting http://www.rigidindustries.com/
JAMAR Brakes http://www.jamarperformance.com/
Artec Industries http://www.artecindustries.com/
TubeWorks Rearends
TUFF STUFF Winches
Race Truck Factory
Alper Motorsports
Trek Armor
Top
User avatar
economig
Posts: 1101
Joined: Sun Jan 09, 2011 5:15 am
Bronco Info: 1994 Eddie Bauer 5.8L
Location: SW Riverside County

Dan's Full Build Bronco

Post by economig »

Dan88Rigid wrote:economig here's a better pic of the front shock mounts
Lookin pretty bomb proof! thanks for the close ups!

L I K E
T H R E A T Motorsports
Top
User avatar
Rwies
Posts: 301
Joined: Sun Dec 20, 2009 5:19 pm
Bronco Info: 93 Bronco
Location: West Covina, CA

Re: Dan's Full Build Bronco

Post by Rwies »

Dan are you going to be at the shop tonight? I talked to Jason and im heading over there in a few. I heard hes doing work to Bernals bronco as well...cant wait to see the progress! Did you still want that proportioning valve we talked about a while ago?
Top
User avatar
Dan88Rigid
Posts: 91
Joined: Tue Jun 26, 2012 10:57 pm
Bronco Info: Full build by Jason Rivera from Race Truck Factory.

Re: Dan's Full Build Bronco

Post by Dan88Rigid »

No im back home in san diego. Might be up there sunday. Talk with Jason and see if he wants to use one on the build.
Rigid Industries - LED Lighting http://www.rigidindustries.com/
JAMAR Brakes http://www.jamarperformance.com/
Artec Industries http://www.artecindustries.com/
TubeWorks Rearends
TUFF STUFF Winches
Race Truck Factory
Alper Motorsports
Trek Armor
Top
D1cker1
Posts: 1255
Joined: Mon Nov 29, 2010 10:44 pm
Bronco Info: 93 EB Bronco 12"Over 40" BFG projects 5.13 gears in a 8.8... 1 seat and stripped Interior
Location: ORANGE CUNTY, COMIFORNIA وس إنجليزي - عربي

Dan's Full Build Bronco

Post by D1cker1 »

This rig looks awesome so far..
Any plans to race?
Integrity, Money, Relevance
1amD1cker1@gmail.com
Top
User avatar
Dan88Rigid
Posts: 91
Joined: Tue Jun 26, 2012 10:57 pm
Bronco Info: Full build by Jason Rivera from Race Truck Factory.

Re: Dan's Full Build Bronco

Post by Dan88Rigid »

The Bronco will be mostly used for prerunning and racer support for baja races. It will also be at SEMA this year and most shows on the west coast. I might race it in HDRA but the problem with racing is it just puts to much abuse on parts. But maybe 1 or two races a year.
Rigid Industries - LED Lighting http://www.rigidindustries.com/
JAMAR Brakes http://www.jamarperformance.com/
Artec Industries http://www.artecindustries.com/
TubeWorks Rearends
TUFF STUFF Winches
Race Truck Factory
Alper Motorsports
Trek Armor
Top
CITYRAT
Posts: 116
Joined: Sat Nov 12, 2011 4:16 pm
Bronco Info: 93 Bronco Prerunner

Re: Dan's Full Build Bronco

Post by CITYRAT »

Ridicoulous!!.. Some really nice broncos being built. Time to step up my game.
Top
User avatar
economig
Posts: 1101
Joined: Sun Jan 09, 2011 5:15 am
Bronco Info: 1994 Eddie Bauer 5.8L
Location: SW Riverside County

Re: Dan's Full Build Bronco

Post by economig »

it'd be cool to see a new 1400 with an OG Bronco body and wheel base

pretty sure i would drive out & camp in the dez to see that. i think it'd bring a lot of interest. i'd also say it's on a different level than *most* of the other 1450-ish Bronco entries that can't do C3 or other classes for motor combo or suspension.

i really enjoyed some of the pics, after looking with a real computer, rather than just my phone. looks like she's getting close to being a runner.
T H R E A T Motorsports
Top
User avatar
Andy Jones
Posts: 2205
Joined: Tue Dec 08, 2009 2:47 pm
Bronco Info: In the Works!
Location: Canyon Lake,ca
Contact:
Contact Andy Jones

Re: Dan's Full Build Bronco

Post by Andy Jones »

Awesome Rig! Whose Beams are you running.. RTF?
dont PM me.. I don't get them on Taptalk
Top
User avatar
philofab
Basura Blanca
Posts: 5643
Joined: Tue Dec 08, 2009 9:37 am
Bronco Info: A pile of crap.
Location: Bullhead, AZ
Contact:
Contact philofab

Re: Full Build Bronco LS1

Post by philofab »

I'll never work.


About time you posted this up on here.
Follow me on Instagram. @philofab1 or Youtube https://www.youtube.com/philofab/
Top
User avatar
Dan88Rigid
Posts: 91
Joined: Tue Jun 26, 2012 10:57 pm
Bronco Info: Full build by Jason Rivera from Race Truck Factory.

Re: Full Build Bronco LS1

Post by Dan88Rigid »

HAHA I know everyone i ran into or talked to(which was alot) asked if i posted it on GoFast. So i finally made time to do it.
Rigid Industries - LED Lighting http://www.rigidindustries.com/
JAMAR Brakes http://www.jamarperformance.com/
Artec Industries http://www.artecindustries.com/
TubeWorks Rearends
TUFF STUFF Winches
Race Truck Factory
Alper Motorsports
Trek Armor
Top
User avatar
Dan88Rigid
Posts: 91
Joined: Tue Jun 26, 2012 10:57 pm
Bronco Info: Full build by Jason Rivera from Race Truck Factory.

Re: Full Build Bronco LS1

Post by Dan88Rigid »

Picking up the LS1 motor and Th400 trans next week from Az...
Rigid Industries - LED Lighting http://www.rigidindustries.com/
JAMAR Brakes http://www.jamarperformance.com/
Artec Industries http://www.artecindustries.com/
TubeWorks Rearends
TUFF STUFF Winches
Race Truck Factory
Alper Motorsports
Trek Armor
Top
User avatar
Polarcub
Posts: 1949
Joined: Thu Dec 10, 2009 8:53 pm
Bronco Info: 95 Eddie Bauer and 95 XLT still in the shop........
Location: Brighton, TN

Re: Full Build Bronco LS1

Post by Polarcub »

Looking great!
Jeremy
Top
User avatar
BDKW1
Posts: 1517
Joined: Mon Jun 14, 2010 1:19 pm
Bronco Info: It's the new and inproved Party Barge!
Location: Not Socal

Re: Full Build Bronco LS1

Post by BDKW1 »

Dan88Rigid wrote:Picking up the LS1 motor and Th400 trans next week from Az...
I was liking the build right up till that LOL..........

Now it you have said twin turbo ecoboost it would have been really cool..........
Top
Post Reply

Return to “Big Broncos”