94 Raptor killer

RyanDS650X · Post by **RyanDS650X** » Mon Dec 14, 2015 6:05 pm

He said until i go inside the motor and upgrade that anything else could wait. I could do a bigger TB and injectors at any point between now and whatever i do down the road.
My trans has steel planets, Z pac intermediate clutches, punisher valve body, mag hytec pan, twin coolers with an e fan set to come on at 190*.

cs_drums · Post by **cs_drums** » Mon Dec 14, 2015 7:14 pm

I've had great luck with stick tranny with huge cooler and punisher. Once it goes to getting the works.

cs_drums · Post by **cs_drums** » Tue Dec 15, 2015 6:46 pm

Hopefully the hood stops flapping with the 5th pin

Also got my convex mirrors mounted. Was gonna do a fancy tube mount but I'm more than happy with them on the stock mirror brackets.

cs_drums · Post by **cs_drums** » Sat Jan 02, 2016 11:00 am

http://youtu.be/64o1ZzpF3rs

Loving the Supercharger!
Had a blast though with the baby my wife will only go out for one night so we had to cut it short.

Don is the man!!!! We had a good run around the park. Thanks again!!!!

So smooth you can fall asleep Haha.....

dtbback · Post by **dtbback** » Sat Jan 02, 2016 12:18 pm

Looks really smooth!

cs_drums · Post by **cs_drums** » Sat Jan 02, 2016 12:33 pm

Also my hatred for side by sides has gone up exponentially hahaha the chop that those little tire create is like washboard on steroids.

cs_drums · Post by **cs_drums** » Sun Jan 03, 2016 1:00 pm

Version 2.0

http://youtu.be/q-3M4Glt5y8

C H O · Post by **C H O** » Sun Jan 03, 2016 7:43 pm

Awesome buddy! Stoked for ya

D1cker1 · Post by **D1cker1** » Sun Jan 03, 2016 8:59 pm

The bronco looks smooth..
It good to see you out there again.. I was hoping to run into you guys
i was in a side/side

donncdrc · Post by **donncdrc** » Thu Jan 07, 2016 11:06 am

A little bird told me about your video. I like it. It looks like you were having more fun then I was! Do you have anything from when we were going through the sand?

cs_drums · Post by **cs_drums** » Thu Jan 07, 2016 11:37 am

Not when we were following. The shots of the buggy and the bronco hitting the two jumps on sequence are of that section though. My new favorite run.

cs_drums · Post by **cs_drums** » Thu Jan 07, 2016 11:38 am

Cory has some cool pics from the bonfire. I think I have you email somewhere I'll have home send them to you.

cs_drums · Post by **cs_drums** » Thu Jan 07, 2016 12:05 pm

Another Paxton unit on eBay ....

http://www.ebay.com/itm/PAXTON-SUPERCHA ... 0901627972

funinthesun95 · Post by **funinthesun95** » Thu Jan 07, 2016 12:21 pm

sold 2k

hah

cs_drums · Post by **cs_drums** » Thu Jan 07, 2016 12:29 pm

Oh my bad.

funinthesun95 · Post by **funinthesun95** » Thu Jan 07, 2016 3:13 pm

is that your dude that help you with yours?

cs_drums · Post by **cs_drums** » Thu Jan 07, 2016 6:28 pm

I don't think so. Confused cause the add says San Marcos but the company is in Texas. They have a upgraded compressor wheel for an extra 2-3psi and also offer rebuild kits. I'm gonna call the dude at paradise wheel and ask him what's up

cs_drums · Post by **cs_drums** » Fri Jan 08, 2016 12:49 am

Getting some cleaning done..... Next generous wd40 bath haha

cs_drums · Post by **cs_drums** » Fri Jan 08, 2016 12:50 am

funinthesun95 · Post by **funinthesun95** » Fri Jan 08, 2016 12:16 pm

cs_drums wrote:I don't think so. Confused cause the add says San Marcos but the company is in Texas. They have a upgraded compressor wheel for an extra 2-3psi and also offer rebuild kits. I'm gonna call the dude at paradise wheel and ask him what's up

ok

that city right out side of San Antonio on the way to Austin....copy

94 Raptor killer

Re: 94 Raptor killer

94 Raptor killer

94 Raptor killer

94 Raptor killer

Re: 94 Raptor killer

94 Raptor killer

94 Raptor killer

94 Raptor killer

Re: 94 Raptor killer

Re: 94 Raptor killer

94 Raptor killer

94 Raptor killer

94 Raptor killer

Re: 94 Raptor killer

94 Raptor killer

Re: 94 Raptor killer

94 Raptor killer

94 Raptor killer

94 Raptor killer

Re: 94 Raptor killer