D1cker1 93 Build "The Croc"

D1cker1
Posts: 1255
Joined: Mon Nov 29, 2010 10:44 pm
Bronco Info: 93 EB Bronco 12"Over 40" BFG projects 5.13 gears in a 8.8... 1 seat and stripped Interior
Location: ORANGE CUNTY, COMIFORNIA وس إنجليزي - عربي

D1cker1 93 Build "The Croc"

Post by D1cker1 »

Drove fast cars most my life.. but bought a bronco to tow my bike mainly.. But with all the
f350's at the track i want to lift this think and make it look mean..
All while driving it to work and taking off-road but not getting stuck
Image

Uploaded with ImageShack.us
93 EB Bronco 147k miles..

10/2010 Purchased
Replaced:
Spark Plugs, Wires and Distributor cap
Fuel Fliter

Did all of this Due to not passing Smog

------------------------------------------Maintenance-------------------------------
10/2010 Purchased
Replaced:
Spark Plugs, Wires and Distributor cap
Fuel Fliter
Oil & Filter ETC

Did all of this Due to not passing Smog


12/2011Purchased new Rear window motor
Fuel Sending Unit
Made a switch for Head lights
removed Rear tire Carrier



````````````````````````````````````````Suspension````````````````````````````````````````

Plans
KING Coilovers 2.5 * 12 and Engince Cage



After looking over the engine Bay. its seems the previous owner did some interesting connections with the
Smog Pump
Vacuum Lines
and some general concerns, but i am looking going through everything slowly

This is a slow build which means its not as fast as some of the others
Bump Stops
Solo Radius Arms and Cut/Turns
Limit Straps

Deaver F53
KING 10" Shocks
New rear Shock Mount

-------------------------------------------BODY--------------------
Repaint.. Stock green/tank
Maybe.... Fiberglass Front Fenders Once suspension is completed
Prerunner Bumpers

6 Alcoas on 35's
Last edited by D1cker1 on Wed Jul 04, 2012 11:44 pm, edited 4 times in total.
Integrity, Money, Relevance
1amD1cker1@gmail.com
User avatar
Nick
Founder
Posts: 3965
Joined: Sat Dec 05, 2009 12:36 pm
Bronco Info: 1995 bird poop target
Location: La Habra Ca.

Re: D1cker1 93 Build "Bucky"

Post by Nick »

Sounds like a good plan!
"If at first you don't succeed, it may be cheaper to buy it."
D1cker1
Posts: 1255
Joined: Mon Nov 29, 2010 10:44 pm
Bronco Info: 93 EB Bronco 12"Over 40" BFG projects 5.13 gears in a 8.8... 1 seat and stripped Interior
Location: ORANGE CUNTY, COMIFORNIA وس إنجليزي - عربي

Re: D1cker1 93 Build "Bucky"

Post by D1cker1 »

12/23/2011
Changed Out My Serpentine Belt.. and Tensioner
It started to Shread.. so i cut a small piece off that was shredding

When i drove it around the block it actually became worse::
The shred had wrapped itself around the alternator
O reailly gave me the wrong Belt because it was too loose
Replaced it with a Gates

Was I finish..... No
The tensioner needed replacing as it was very warn..

Now it runs fairy well

$83.00 :|
Integrity, Money, Relevance
1amD1cker1@gmail.com
D1cker1
Posts: 1255
Joined: Mon Nov 29, 2010 10:44 pm
Bronco Info: 93 EB Bronco 12"Over 40" BFG projects 5.13 gears in a 8.8... 1 seat and stripped Interior
Location: ORANGE CUNTY, COMIFORNIA وس إنجليزي - عربي

Re: D1cker1 93 Build "Bucky"

Post by D1cker1 »

Update
Scored some AlcoasImage

Uploaded with ImageShack.us

-------
Inspected under the hood today and i noticed my serpentine belt is cracked, and looks like its not
in alignment with the a/c compressor..
How do i fix this?Image

Uploaded with ImageShack.us
Integrity, Money, Relevance
1amD1cker1@gmail.com
User avatar
johncharlesb
Posts: 510
Joined: Fri Mar 12, 2010 7:59 pm
Bronco Info: 1962 f100, 1995 Bronco

Re: D1cker1 93 Build "Bucky"

Post by johncharlesb »

My 95 Bronco power steering pulley cracked and when I replaced the pulley the belt was just like that picture. I could not get the pulley to press any farther up the shaft and the pump had excessive fore and aft play in the shaft. The pump needed to be changed out on mine to get the belt aligned.
D1cker1
Posts: 1255
Joined: Mon Nov 29, 2010 10:44 pm
Bronco Info: 93 EB Bronco 12"Over 40" BFG projects 5.13 gears in a 8.8... 1 seat and stripped Interior
Location: ORANGE CUNTY, COMIFORNIA وس إنجليزي - عربي

Re: D1cker1 93 Build "Bucky"

Post by D1cker1 »

I will take a look tomorrow and report back
Integrity, Money, Relevance
1amD1cker1@gmail.com
D1cker1
Posts: 1255
Joined: Mon Nov 29, 2010 10:44 pm
Bronco Info: 93 EB Bronco 12"Over 40" BFG projects 5.13 gears in a 8.8... 1 seat and stripped Interior
Location: ORANGE CUNTY, COMIFORNIA وس إنجليزي - عربي

Re: D1cker1 93 Build "Bucky"

Post by D1cker1 »

Little Update 2/26/11
Picked up some new items for my build
Picked up a set of Cut/Turns and Engine cage
More Alcoas
33 BFG ATR.. Brand New.. Ouch
Image

Uploaded with ImageShack.us
Image

Uploaded with ImageShack.us
Integrity, Money, Relevance
1amD1cker1@gmail.com
User avatar
philofab
Basura Blanca
Posts: 5643
Joined: Tue Dec 08, 2009 9:37 am
Bronco Info: A pile of crap.
Location: Bullhead, AZ
Contact:

Re: D1cker1 93 Build "Bucky"

Post by philofab »

Funny it looks different in person that it does on the internet, "brother".

What kind of bike do you tow? Dirt bike?
Follow me on Instagram. @philofab1 or Youtube https://www.youtube.com/philofab/
D1cker1
Posts: 1255
Joined: Mon Nov 29, 2010 10:44 pm
Bronco Info: 93 EB Bronco 12"Over 40" BFG projects 5.13 gears in a 8.8... 1 seat and stripped Interior
Location: ORANGE CUNTY, COMIFORNIA وس إنجليزي - عربي

Re: D1cker1 93 Build "Bucky"

Post by D1cker1 »

That's very true.. I hope that's a good thing.

I used to tow my track bike 1198.. But sold it and I'm
Considering the purchase of a buggy or dirt bike this season.
Integrity, Money, Relevance
1amD1cker1@gmail.com
User avatar
philofab
Basura Blanca
Posts: 5643
Joined: Tue Dec 08, 2009 9:37 am
Bronco Info: A pile of crap.
Location: Bullhead, AZ
Contact:

D1cker1 93 Build "Bucky"

Post by philofab »

A Duc huh? I wanted a 848 badly when they came out but after checking the maintenance costs I had to pass. I put 47K on my last bike.
Follow me on Instagram. @philofab1 or Youtube https://www.youtube.com/philofab/
D1cker1
Posts: 1255
Joined: Mon Nov 29, 2010 10:44 pm
Bronco Info: 93 EB Bronco 12"Over 40" BFG projects 5.13 gears in a 8.8... 1 seat and stripped Interior
Location: ORANGE CUNTY, COMIFORNIA وس إنجليزي - عربي

Re: D1cker1 93 Build

Post by D1cker1 »

philofab wrote:A Duc huh? I wanted a 848 badly when they came out but after checking the maintenance costs I had to pass. I put 47K on my last bike.
lMaintenance is not bad.. I just rode street because I like going really fast..
A race track is fun on a bike.
Integrity, Money, Relevance
1amD1cker1@gmail.com
User avatar
philofab
Basura Blanca
Posts: 5643
Joined: Tue Dec 08, 2009 9:37 am
Bronco Info: A pile of crap.
Location: Bullhead, AZ
Contact:

Re: D1cker1 93 Build

Post by philofab »

D1cker1 wrote:Maintenance is not bad.. I just rode street because I like going really fast..
A race track is fun on a bike.

The dealer said I needed some 10K computer to set the valves and 80% of the maintenance couldn't be done anywhere but the dealer.

It is a sexy bike though....
Image
Follow me on Instagram. @philofab1 or Youtube https://www.youtube.com/philofab/
D1cker1
Posts: 1255
Joined: Mon Nov 29, 2010 10:44 pm
Bronco Info: 93 EB Bronco 12"Over 40" BFG projects 5.13 gears in a 8.8... 1 seat and stripped Interior
Location: ORANGE CUNTY, COMIFORNIA وس إنجليزي - عربي

Re: D1cker1 93 Build "Bucky"

Post by D1cker1 »

dealers always say that..
The newer ducs from 2010 + the maintenance intervals are about 15k miles.

Nothing rides like a DUCATI.
Integrity, Money, Relevance
1amD1cker1@gmail.com
User avatar
philofab
Basura Blanca
Posts: 5643
Joined: Tue Dec 08, 2009 9:37 am
Bronco Info: A pile of crap.
Location: Bullhead, AZ
Contact:

Re: D1cker1 93 Build "Bucky"

Post by philofab »

D1cker1 wrote:dealers always say that..
The newer ducs from 2010 + the maintenance intervals are about 15k miles.

Nothing rides like a DUCATI.
That's retarded. They lost a 16K sale.
Follow me on Instagram. @philofab1 or Youtube https://www.youtube.com/philofab/
User avatar
only1mikey
Posts: 494
Joined: Tue Jan 25, 2011 12:06 pm
Bronco Info: 84 Bronco
Location: Simi Valley, CA

Re: D1cker1 93 Build "Bucky"

Post by only1mikey »

Nice ride!

Also nice meeting you at the swapmeet!!!

Mike
D1cker1
Posts: 1255
Joined: Mon Nov 29, 2010 10:44 pm
Bronco Info: 93 EB Bronco 12"Over 40" BFG projects 5.13 gears in a 8.8... 1 seat and stripped Interior
Location: ORANGE CUNTY, COMIFORNIA وس إنجليزي - عربي

Re: D1cker1 93 Build "Bucky"

Post by D1cker1 »

only1mikey wrote:Nice ride!

Also nice meeting you at the swapmeet!!!

Mike
Likewise
Eh it's ok... It's no "Caged Bricknose":)
Integrity, Money, Relevance
1amD1cker1@gmail.com
User avatar
only1mikey
Posts: 494
Joined: Tue Jan 25, 2011 12:06 pm
Bronco Info: 84 Bronco
Location: Simi Valley, CA

Re: D1cker1 93 Build "Bucky"

Post by only1mikey »

Meh, cages are only useful if you plan on rolling. Other than that they just slow you down due to their extra weight.

Mike
User avatar
guard
Posts: 424
Joined: Tue Oct 18, 2011 7:51 pm
Bronco Info: 1996 Ford Bronco 5.8
Location: Loma Linda, CA
Contact:

Re: D1cker1 93 Build "Bucky"

Post by guard »

only1mikey wrote:Meh, cages are only useful if you plan on rolling. Other than that they just slow you down due to their extra weight.

Mike
My thoughts exactly!! For me, I spent that weight addition in rock sliders since that's where I was more likely to do the damage.
D1cker1
Posts: 1255
Joined: Mon Nov 29, 2010 10:44 pm
Bronco Info: 93 EB Bronco 12"Over 40" BFG projects 5.13 gears in a 8.8... 1 seat and stripped Interior
Location: ORANGE CUNTY, COMIFORNIA وس إنجليزي - عربي

Re: D1cker1 93 Build "Bucky"

Post by D1cker1 »

:D :D :D :D )
Image

Uploaded with ImageShack.us
2/28/2012
Integrity, Money, Relevance
1amD1cker1@gmail.com
User avatar
Pre Run It
Posts: 203
Joined: Sat Feb 04, 2012 12:53 am
Bronco Info: 93' 5.8 glass F & B 2.5 pro series FOX with Res, Caged, bfg projects beadlocks currie
Location: Temecula, Ca

Re: D1cker1 93 Build "The Badger"

Post by Pre Run It »

Nice looks like you scored again.
Post Reply