Josh aka greaslifes 86

hobbyturnedobsession · Mon May 13, 2013 6:35 pm

Looking good Josh!

93Broncobuff · Post by **93Broncobuff** » Mon May 13, 2013 8:49 pm

ok so my gf was over and we were hanging out and my laptop was open to GFB......so the laptop refreshes and ur thread comes up with these pics man....... needles to say I told her to hold up, I need to drool over some pics hahahahahahahah lookin damn good man, damn good!!!

priorities:

1)family
2)Bronk
3)Guns
4)gf

sad but true

greaslife · Post by **greaslife** » Tue May 14, 2013 5:56 am

Haha there's a Time and place for everything. After this trip I'm going too do the front half of the cage. Once that's done it's time too take a brake and run the crap out of her. Thanks too all for you help.

93Broncobuff · Post by **93Broncobuff** » Tue May 14, 2013 7:10 am

greaslife wrote:Haha there's a Time and place for everything. After this trip I'm going too do the front half of the cage. Once that's done it's time too take a brake and run the crap out of her. Thanks too all for you help.

no man thank YOU for giving this site another bitchin family pre-runner for the rest of us to gawk at!!!

greaslife · Post by **greaslife** » Sat May 18, 2013 9:33 am

All welded and painted

: ImageUploadedByTapatalk1368894828.405638.jpg (67.2 KiB) Viewed 808 times

: ImageUploadedByTapatalk1368894798.011521.jpg (64.66 KiB) Viewed 808 times

hobbyturnedobsession · Sat May 18, 2013 10:46 am

Ooohh lala!!!

323bronco · Post by **323bronco** » Sat May 18, 2013 2:00 pm

Looks good josh nice work

greaslife · Post by **greaslife** » Sat May 18, 2013 2:25 pm

Went quicker than I thought it would. So just went to ORW for shock seals. The front is going too have quad 2.0 s old school will have picks tomorrow

Nick · Post by **Nick** » Sat May 18, 2013 9:07 pm

Nice!

greaslife · Post by **greaslife** » Tue Jun 18, 2013 12:01 pm

Little up date. I got the thing slapped together and ran it on a couple of short runs at the last race. Was able too take some big woop sections at a good pace. Then I relished my steering is way off and my motor would not spin over 4k. So I loaded up and went home discussed And pissed off. On our way home I talked too the wife And asked how she felt about sealing big red. Her response scared me I thought I was on the couch for sure. Now I'm trying too get motivated too finish her up but having a hard time doing so. That's the skinny may have some updates later we will see

ESHALLBETTER · Post by **ESHALLBETTER** » Tue Jun 18, 2013 12:08 pm

greaslife wrote:Little up date. I got the thing slapped together and ran it on a couple of short runs at the last race. Was able too take some big woop sections at a good pace. Then I relished my steering is way off and my motor would not spin over 4k. So I loaded up and went home discussed And pissed off. On our way home I talked too the wife And asked how she felt about sealing big red. Her response scared me I thought I was on the couch for sure. Now I'm trying too get motivated too finish her up but having a hard time doing so. That's the skinny may have some updates later we will see

I always get disgusted and want to sell my crap, but then you know you would just want to start building another one.....

93Broncobuff · Post by **93Broncobuff** » Tue Jun 18, 2013 5:43 pm

hang in there buddy mo pay checks will get that thing rippin like a trophy hahah but seriously that thing is a gem bro, its totally you!

Silverslk · Post by **Silverslk** » Wed Jun 19, 2013 6:29 am

I cant believe you actually considered selling it.... with all that work in it?

D1cker1 · Post by **D1cker1** » Wed Jun 19, 2013 7:24 am

I know what you mean.. Slow and steady

ChaseTruck754 · Post by **ChaseTruck754** » Wed Jun 19, 2013 8:44 am

Silverslk wrote:I cant believe you actually considered selling it.... with all that work in it?

I can. Been there and it sucks when you're frustrated to the point of just parting with the thing. Take a step (or 6) back from the thing & fiddle with something else for a bit. Work on the hot rod or something else for a change & your desire to come back to the bronco will be there - trust me.

I've sold a couple cars/projects once I've been frustrated with them & I've usually regretted it!

greaslife · Post by **greaslife** » Mon Sep 16, 2013 9:05 am

So haven't looked at or touched big red since my last post. Think I'm getting close too fondling her agin. What a fickle bitch she is.

So don't remember if I talked about how she drove after the beam winding. She rocks through the whoops but on straights I'm sawing on the wheel trying too keep her ass from swing around. Would the difference in track with front and rear cause this or is it something simple.

bajascott · Post by **bajascott** » Mon Sep 16, 2013 9:20 am

Track width.

Rmc · Post by **Rmc** » Mon Sep 16, 2013 9:32 am

Bump steer?

greaslife · Post by **greaslife** » Mon Sep 16, 2013 10:10 am

6 over on the front verses stock rear width

Smooth surface.

yikes · Post by **yikes** » Mon Sep 16, 2013 10:17 am

greaslife wrote:She rocks through the whoops but on straights I'm sawing on the wheel trying too keep her ass from swing around. Would the difference in track with front and rear cause this or is it something simple.

Sometimes too much rebound dampening will cause this in a short wheelbase. The tires will skip across the surface in high frequency bumps, rather than staying in contact, making it feel loose.

Josh aka greaslifes 86

Re: Josh aka greaslifes 86

Re: Josh aka greaslifes 86

Re: Josh aka greaslifes 86

Re: Josh aka greaslifes 86

Re: Josh aka greaslifes 86

Re: Josh aka greaslifes 86

Re: Josh aka greaslifes 86

Re: Josh aka greaslifes 86

Re: Josh aka greaslifes 86

Re: Josh aka greaslifes 86

Re: Josh aka greaslifes 86

Re: Josh aka greaslifes 86

Re: Josh aka greaslifes 86

Re: Josh aka greaslifes 86

Re: Josh aka greaslifes 86

Re: Josh aka greaslifes 86

Re: Josh aka greaslifes 86

Re: Josh aka greaslifes 86

Re: Josh aka greaslifes 86

Re: Josh aka greaslifes 86