poolman's 84 Bronco

poolman · Post by **poolman** » Sun Dec 27, 2009 10:21 am

Finally got my body back to my house. Been cutting bedside off and starting to remove dash. I'm going to strip it out and then paint shell. Hope to get it back on frame in a month or so. I should get it in running condition in a few more months.

Rednek Renegade · Post by **Rednek Renegade** » Tue Dec 29, 2009 9:40 pm

Have any pix of how much was cut? Also what brand bedsides are those?

Polarcub · Post by **Polarcub** » Tue Dec 29, 2009 10:47 pm

Looking good...cant wait to see it come together.

poolman · Post by **poolman** » Wed Dec 30, 2009 6:58 am

i used cut odd wheels to trim it off. I need to trim it some more and grind off sharp edges. Autofab bed sides. Shitty pic, more to follow.

poolman · Post by **poolman** » Wed Dec 30, 2009 7:12 am

try again...

poolman · Post by **poolman** » Sat Jul 10, 2010 9:55 am

Update
Finally getting some work done on project again.I ended up buying 91 f150 4x4 for 800 bucks sold wheels tire,fake hood and assorted crap and got my money out of it.I took out motor 75K....seems right for the mileage and wear and tear. I stripped all the fuel system,wiring out and saved whatever I could, then gave away what was left. I told the guy he could have the truck but he had to take everything that was in it! So I'm installing fuel lines,wire harness everything is starting to take shape. I cleaned out gas tank from other beater Bronco that I had previously. Starting to look like it may all fit back together! I hope to get the body back on before fall, then work on building cage when it cools off here (111 degrees today) Neighbors think I'm nuts....I was washing the chassis before I put it back in garage to work on it. Keeps me off the streets at least!

poolman · Post by **poolman** » Sat Jul 10, 2010 9:59 am

Since I have started project I have had 2 wrecked Broncos and two different F150's for parts cars. Made money on all of them(not lots) and got what I needed for my project...all off local Craigs List,pm

BDKW1 · Post by **BDKW1** » Sat Jul 10, 2010 5:42 pm

Nice rims!

philofab · Post by **philofab** » Sun Jul 11, 2010 9:41 pm

Nice APPs. I missed out on a set of those at the swap meet.

Post by **SteveG** » Sun Jul 11, 2010 9:57 pm

BDKW1 wrote:Nice rims!

Enduro!

poolman · Post by **poolman** » Sun Jul 11, 2010 10:35 pm

"Enduro" my favorite TT and always loved the wheels (even the yellow ones! lol!)

I might have more......Philo you still interested in trans?

philofab · Post by **philofab** » Sun Jul 11, 2010 10:38 pm

poolman wrote:"I might have more......Philo you still interested in trans?

Yea... I did some damage to mine this weekend... was overheating it. I'll need a rebuild for sure now.

BDKW1 · Post by **BDKW1** » Mon Jul 12, 2010 6:14 pm

poolman wrote:"Enduro" my favorite TT and always loved the wheels (even the yellow ones! lol!)

Screw those yellow wheels, they were such a pain in the ass to strip! Some of them are now polished, the rest are just plain..........

poolman · Post by **poolman** » Tue Jul 20, 2010 4:36 pm

Some new pictures...I have been working on brake lines, wiring, fuel system. So far all original ford stuff, I have been cleaning stuff with wire wheel on grinder. Simple green cleans stuff up really nice. Wiring,fuel lines from 91 F150 I bought.

shockseals.com · Post by **shockseals.com** » Tue Jul 20, 2010 8:58 pm

The driver side rear leaf clamp on compression will whack the gas fill tube... put a new hole in the clamp so you can cut it down as far as possible and round the edges.

poolman · Post by **poolman** » Wed Jul 21, 2010 6:31 am

10-4 thanks Kris

poolman · Post by **poolman** » Sun Dec 26, 2010 9:15 am

I thought I would throw up some pictures of the Bronco. Coming together a little at a time. Money been short so a lot of cleaning rebuilding,painting polishing etc. Hope to get the body shell painted and back on the chassis in the next month or so. sorry but just getting Photobucket going so excuse the order of the pictures. I'm trying to get everything separated and in order.

http://s1142.photobucket.com/albums/n61 ... 20Project/

PS forgot how to post the link, pm

poolman's 84 Bronco

poolman's 84 Bronco

Re: poolman's 84 Bronco

Re: poolman's 84 Bronco

Re: poolman's 84 Bronco

Re: poolman's 84 Bronco

Re: poolman's 84 Bronco

Re: poolman's 84 Bronco

Re: poolman's 84 Bronco

Re: poolman's 84 Bronco

Re: poolman's 84 Bronco

Re: poolman's 84 Bronco

Re: poolman's 84 Bronco

Re: poolman's 84 Bronco

Re: poolman's 84 Bronco

Re: poolman's 84 Bronco

Re: poolman's 84 Bronco

Re: poolman's 84 Bronco