Yeah it seems that there is a lot of broncos in this area, that's cool. Always like seeing on the road. When all our trucks are running at the same time we should get together, maybe at a IN & OUT some where. All parts will be top notch no matter what route you end up taking. I will have to see if i have a shot of the lower shock mount at the beams. I know that i had to do it twice. I didn't line it up properly the first time and the shock would hit as it drooped out on the tabs. So i gridded the tabs off and re-did it again. Live and learn right. When you get it back out on the road I would like to check it out, and see your ride. I like all the different ideas everyone brings to the table here on this site. So much to learn and there is a lot of experience on GFB to. (Bronc's lookin good!) Thanks it's diffidently a work in progress.economig wrote:Seems there's now a lot of us close to wildomar, murrieta & t-mec now. This is basically the same route i'm going with my 94 but a mix of stuff... Threat, autofab, baker, maybe some solo this week ha ha. Hopin to get her on her wheels this week. Any pics of the lower shock mount? I've been going back and forth on my locations this week. How much room i want to leave for improvement or keep it real simple. Bronc's lookin good!
My "92" Bronco Build
- valor100
- Posts: 140
- Joined: Wed Apr 20, 2011 7:12 am
- Bronco Info: 1992 Ford Bronco 5.8 had Pro Comp lift, know it sits on top of Solo 4 over cut and turned TTB's
- Location: Murrieta Ca.
Re: My
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: My "92" Bronco Build
Hit the In-N-Out in Temec. (one on Jefferson??) a weekend I'm at my dads & I'll come hang!
Owner of only dead and forgotten projects
- valor100
- Posts: 140
- Joined: Wed Apr 20, 2011 7:12 am
- Bronco Info: 1992 Ford Bronco 5.8 had Pro Comp lift, know it sits on top of Solo 4 over cut and turned TTB's
- Location: Murrieta Ca.
Re: My "92" Bronco Build
Yeah i know right where that is. Next time you have plans of heading this way let me know. We can over run that parking lot with bronco's.ChaseTruck754 wrote:Hit the In-N-Out in Temec. (one on Jefferson??) a weekend I'm at my dads & I'll come hang!
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: My "92" Bronco Build
I'm thinking I'll be down there the 1st or 2nd weekend in March & I will probably need to be meeting with 2 members anyways.
Owner of only dead and forgotten projects
- valor100
- Posts: 140
- Joined: Wed Apr 20, 2011 7:12 am
- Bronco Info: 1992 Ford Bronco 5.8 had Pro Comp lift, know it sits on top of Solo 4 over cut and turned TTB's
- Location: Murrieta Ca.
Re: My "92" Bronco Build
All right then I'll keep it open. Hopefully i have my fenders mounted by then. I know I wont have much time this weekend. Either way I'm down for some fab talk or what ever.
- valor100
- Posts: 140
- Joined: Wed Apr 20, 2011 7:12 am
- Bronco Info: 1992 Ford Bronco 5.8 had Pro Comp lift, know it sits on top of Solo 4 over cut and turned TTB's
- Location: Murrieta Ca.
Re: My "92" Bronco Build
I have an up date. Got my front fenders mounted finally. It took me a while to think it through, but what i needed to do was just start. So that is what I did. I started with a inner core support to mount everything to and strengthin the front clip.
- Attachments
-
- #4.jpg (53.61 KiB) Viewed 955 times
-
- #3.jpg (53.88 KiB) Viewed 955 times
-
- #2.jpg (67.73 KiB) Viewed 955 times
-
- #1.jpg (73.37 KiB) Viewed 955 times
- valor100
- Posts: 140
- Joined: Wed Apr 20, 2011 7:12 am
- Bronco Info: 1992 Ford Bronco 5.8 had Pro Comp lift, know it sits on top of Solo 4 over cut and turned TTB's
- Location: Murrieta Ca.
Re: My "92" Bronco Build
More
- Attachments
-
- #10.jpg (61.68 KiB) Viewed 955 times
-
- #9.jpg (63.2 KiB) Viewed 955 times
-
- #7.jpg (69.97 KiB) Viewed 955 times
-
- #5.jpg (80.23 KiB) Viewed 955 times
- valor100
- Posts: 140
- Joined: Wed Apr 20, 2011 7:12 am
- Bronco Info: 1992 Ford Bronco 5.8 had Pro Comp lift, know it sits on top of Solo 4 over cut and turned TTB's
- Location: Murrieta Ca.
Re: My "92" Bronco Build
Making progress
- Attachments
-
- #14.jpg (45.73 KiB) Viewed 954 times
-
- #13.jpg (61.02 KiB) Viewed 954 times
-
- #12.jpg (49.18 KiB) Viewed 954 times
-
- #11.jpg (58.25 KiB) Viewed 954 times
- valor100
- Posts: 140
- Joined: Wed Apr 20, 2011 7:12 am
- Bronco Info: 1992 Ford Bronco 5.8 had Pro Comp lift, know it sits on top of Solo 4 over cut and turned TTB's
- Location: Murrieta Ca.
Re: My "92" Bronco Build
More pictures.
- Attachments
-
- #19.jpg (58.26 KiB) Viewed 954 times
-
- #18.jpg (74.57 KiB) Viewed 954 times
-
- #16.jpg (62.22 KiB) Viewed 954 times
-
- #15.jpg (59.75 KiB) Viewed 954 times
- valor100
- Posts: 140
- Joined: Wed Apr 20, 2011 7:12 am
- Bronco Info: 1992 Ford Bronco 5.8 had Pro Comp lift, know it sits on top of Solo 4 over cut and turned TTB's
- Location: Murrieta Ca.
Re: My "92" Bronco Build
I started this the weekend before the Curt Luduc swap meet
- Attachments
-
- #27.jpg (63.56 KiB) Viewed 954 times
-
- #25.jpg (65.69 KiB) Viewed 954 times
-
- #23.jpg (81.78 KiB) Viewed 954 times
-
- #20.jpg (84.69 KiB) Viewed 954 times
- valor100
- Posts: 140
- Joined: Wed Apr 20, 2011 7:12 am
- Bronco Info: 1992 Ford Bronco 5.8 had Pro Comp lift, know it sits on top of Solo 4 over cut and turned TTB's
- Location: Murrieta Ca.
Re: My "92" Bronco Build
Getting towards the end of the fab work.
- Attachments
-
- #32.jpg (76.16 KiB) Viewed 959 times
-
- #31.jpg (86.73 KiB) Viewed 959 times
-
- #29.jpg (75.06 KiB) Viewed 959 times
-
- #28.jpg (76.82 KiB) Viewed 959 times
- valor100
- Posts: 140
- Joined: Wed Apr 20, 2011 7:12 am
- Bronco Info: 1992 Ford Bronco 5.8 had Pro Comp lift, know it sits on top of Solo 4 over cut and turned TTB's
- Location: Murrieta Ca.
Re: My "92" Bronco Build
Welded my dzus tabs on and staeted to fit the fenders
- Attachments
-
- #37.jpg (59.71 KiB) Viewed 959 times
-
- #36.jpg (71.04 KiB) Viewed 959 times
-
- #34.jpg (82.49 KiB) Viewed 959 times
-
- #33.jpg (59.74 KiB) Viewed 959 times
- valor100
- Posts: 140
- Joined: Wed Apr 20, 2011 7:12 am
- Bronco Info: 1992 Ford Bronco 5.8 had Pro Comp lift, know it sits on top of Solo 4 over cut and turned TTB's
- Location: Murrieta Ca.
Re: My "92" Bronco Build
Next is the rear panels and i picked up a new hood to install as well. I have to break it all down one more time to paint. I will probably fab up some sort of inner fender liner to try and keep out some of the trail from coming in. I took it out on Sunday behind my house and she did really well. Finally got to see how the front performs. I diffidently need to do the rear.
- Attachments
-
- #43.jpg (180.49 KiB) Viewed 959 times
-
- #42.jpg (175.64 KiB) Viewed 959 times
-
- #41.jpg (68.75 KiB) Viewed 959 times
-
- #38.jpg (41.58 KiB) Viewed 959 times
- Silverslk
- Posts: 1932
- Joined: Tue Dec 08, 2009 12:13 pm
- Bronco Info: 1995 Eddie Baur Bronco......GONE to a better home
- Location: Garden Grove, CA
- Contact:
Re: My "92" Bronco Build
Looks really good!!!
SteveG wrote:The point? It's amazing these front ends go down the road straight in any form! The TTB is brute. A broad sword and not a scalpel. That's why I love it!
- Andy Jones
- Posts: 2205
- Joined: Tue Dec 08, 2009 2:47 pm
- Bronco Info: In the Works!
- Location: Canyon Lake,ca
- Contact:
Re: My "92" Bronco Build
Looking good valor! Are you gonna be at the Sunday coffee meet this Sunday?
Sent from my T-Mobile G1 using Tapatalk
Sent from my T-Mobile G1 using Tapatalk
dont PM me.. I don't get them on Taptalk
- BajaF250
- Posts: 2430
- Joined: Fri Jun 18, 2010 7:47 pm
- Bronco Info: 1982 Ford F250
- Location: San Diego, CA
- Contact:
Re: My "92" Bronco Build
Hey Brian,
That looks really nice! I like the way you're using the core support/fender supports to mount your accessories under the hood. It really cleans things up and makes it nice to get stuff up and out of the way!
That looks really nice! I like the way you're using the core support/fender supports to mount your accessories under the hood. It really cleans things up and makes it nice to get stuff up and out of the way!
- valor100
- Posts: 140
- Joined: Wed Apr 20, 2011 7:12 am
- Bronco Info: 1992 Ford Bronco 5.8 had Pro Comp lift, know it sits on top of Solo 4 over cut and turned TTB's
- Location: Murrieta Ca.
Re: My "92" Bronco Build
Thanks Andy.Silverslk wrote:Looks really good!!!
- valor100
- Posts: 140
- Joined: Wed Apr 20, 2011 7:12 am
- Bronco Info: 1992 Ford Bronco 5.8 had Pro Comp lift, know it sits on top of Solo 4 over cut and turned TTB's
- Location: Murrieta Ca.
Re: My
Is it all ready been two weeks, dang time goes by quick when your trying to finish a project. I can't make it this weekend the family and are camping. The wife planned a trip, she said no projects this weekend we're going camping. But for sure the next one I'm in. I wanna hang out with everyone.Andy Jones wrote:Looking good valor! Are you gonna be at the Sunday coffee meet this Sunday?
Sent from my T-Mobile G1 using Tapatalk
- valor100
- Posts: 140
- Joined: Wed Apr 20, 2011 7:12 am
- Bronco Info: 1992 Ford Bronco 5.8 had Pro Comp lift, know it sits on top of Solo 4 over cut and turned TTB's
- Location: Murrieta Ca.
Re: My "92" Bronco Build
Thanks, BajaF250. I liked the way John (Autofab) made his, so I used his idea and made my own. And I was able to get some of the things up a little higher to, for that added clearance. I have to take it apart one more time to paint it all.BajaF250 wrote:Hey Brian,
That looks really nice! I like the way you're using the core support/fender supports to mount your accessories under the hood. It really cleans things up and makes it nice to get stuff up and out of the way!
-
- Posts: 1255
- Joined: Mon Nov 29, 2010 10:44 pm
- Bronco Info: 93 EB Bronco 12"Over 40" BFG projects 5.13 gears in a 8.8... 1 seat and stripped Interior
- Location: ORANGE CUNTY, COMIFORNIA وس إنجليزي - عربي
Re: My "92" Bronco Build
4 over beams look great especially with the fiberglass.
Nice progress
We always tackle the front because it require the most about of work.
Nice progress
We always tackle the front because it require the most about of work.