My "92" Bronco Build

valor100 · Post by **valor100** » Mon Feb 20, 2012 5:05 pm

economig wrote:Seems there's now a lot of us close to wildomar, murrieta & t-mec now. This is basically the same route i'm going with my 94 but a mix of stuff... Threat, autofab, baker, maybe some solo this week ha ha. Hopin to get her on her wheels this week. Any pics of the lower shock mount? I've been going back and forth on my locations this week. How much room i want to leave for improvement or keep it real simple. Bronc's lookin good!

Yeah it seems that there is a lot of broncos in this area, that's cool. Always like seeing on the road. When all our trucks are running at the same time we should get together, maybe at a IN & OUT some where. All parts will be top notch no matter what route you end up taking. I will have to see if i have a shot of the lower shock mount at the beams. I know that i had to do it twice. I didn't line it up properly the first time and the shock would hit as it drooped out on the tabs. So i gridded the tabs off and re-did it again. Live and learn right. When you get it back out on the road I would like to check it out, and see your ride. I like all the different ideas everyone brings to the table here on this site. So much to learn and there is a lot of experience on GFB to. (Bronc's lookin good!) Thanks it's diffidently a work in progress.

ChaseTruck754 · Post by **ChaseTruck754** » Mon Feb 20, 2012 5:07 pm

Hit the In-N-Out in Temec. (one on Jefferson??) a weekend I'm at my dads & I'll come hang!

valor100 · Post by **valor100** » Tue Feb 21, 2012 8:05 am

ChaseTruck754 wrote:Hit the In-N-Out in Temec. (one on Jefferson??) a weekend I'm at my dads & I'll come hang!

Yeah i know right where that is. Next time you have plans of heading this way let me know. We can over run that parking lot with bronco's.

ChaseTruck754 · Post by **ChaseTruck754** » Tue Feb 21, 2012 10:47 am

I'm thinking I'll be down there the 1st or 2nd weekend in March & I will probably need to be meeting with 2 members anyways.

valor100 · Post by **valor100** » Tue Feb 21, 2012 4:29 pm

All right then I'll keep it open. Hopefully i have my fenders mounted by then. I know I wont have much time this weekend. Either way I'm down for some fab talk or what ever.

valor100 · Post by **valor100** » Tue Apr 24, 2012 7:03 am

I have an up date. Got my front fenders mounted finally. It took me a while to think it through, but what i needed to do was just start. So that is what I did. I started with a inner core support to mount everything to and strengthin the front clip.

valor100 · Post by **valor100** » Tue Apr 24, 2012 7:04 am

valor100 · Post by **valor100** » Tue Apr 24, 2012 7:05 am

Making progress

valor100 · Post by **valor100** » Tue Apr 24, 2012 7:07 am

More pictures.

valor100 · Post by **valor100** » Tue Apr 24, 2012 7:09 am

I started this the weekend before the Curt Luduc swap meet

valor100 · Post by **valor100** » Tue Apr 24, 2012 7:11 am

Getting towards the end of the fab work.

valor100 · Post by **valor100** » Tue Apr 24, 2012 7:17 am

Welded my dzus tabs on and staeted to fit the fenders

valor100 · Post by **valor100** » Tue Apr 24, 2012 7:24 am

Next is the rear panels and i picked up a new hood to install as well. I have to break it all down one more time to paint. I will probably fab up some sort of inner fender liner to try and keep out some of the trail from coming in. I took it out on Sunday behind my house and she did really well. Finally got to see how the front performs. I diffidently need to do the rear.

Silverslk · Post by **Silverslk** » Tue Apr 24, 2012 7:58 am

Looks really good!!!

Andy Jones · Post by **Andy Jones** » Tue Apr 24, 2012 8:39 pm

Looking good valor! Are you gonna be at the Sunday coffee meet this Sunday?

Sent from my T-Mobile G1 using Tapatalk

BajaF250 · Post by **BajaF250** » Wed Apr 25, 2012 5:53 am

Hey Brian,
That looks really nice! I like the way you're using the core support/fender supports to mount your accessories under the hood. It really cleans things up and makes it nice to get stuff up and out of the way!

valor100 · Post by **valor100** » Wed Apr 25, 2012 6:15 am

Silverslk wrote:Looks really good!!!

Thanks Andy.

valor100 · Post by **valor100** » Wed Apr 25, 2012 6:21 am

Andy Jones wrote:Looking good valor! Are you gonna be at the Sunday coffee meet this Sunday?

Sent from my T-Mobile G1 using Tapatalk

Is it all ready been two weeks, dang time goes by quick when your trying to finish a project. I can't make it this weekend the family and are camping. The wife planned a trip, she said no projects this weekend we're going camping. But for sure the next one I'm in. I wanna hang out with everyone.

valor100 · Post by **valor100** » Wed Apr 25, 2012 6:32 am

BajaF250 wrote:Hey Brian,
That looks really nice! I like the way you're using the core support/fender supports to mount your accessories under the hood. It really cleans things up and makes it nice to get stuff up and out of the way!

Thanks, BajaF250. I liked the way John (Autofab) made his, so I used his idea and made my own. And I was able to get some of the things up a little higher to, for that added clearance. I have to take it apart one more time to paint it all.

D1cker1 · Post by **D1cker1** » Wed Apr 25, 2012 7:13 am

4 over beams look great especially with the fiberglass.

Nice progress

We always tackle the front because it require the most about of work.

My "92" Bronco Build

Re: My

Re: My "92" Bronco Build

Re: My "92" Bronco Build

Re: My "92" Bronco Build

Re: My "92" Bronco Build

Re: My "92" Bronco Build

Re: My "92" Bronco Build

Re: My "92" Bronco Build

Re: My "92" Bronco Build

Re: My "92" Bronco Build

Re: My "92" Bronco Build

Re: My "92" Bronco Build

Re: My "92" Bronco Build

Re: My "92" Bronco Build

Re: My "92" Bronco Build

Re: My "92" Bronco Build

Re: My "92" Bronco Build

Re: My

Re: My "92" Bronco Build

Re: My "92" Bronco Build