Sean's 91 Bronco Prerunner (FKA Convoy's)
Sean's 91 Bronco Prerunner (FKA Convoy's)
Engine:
Rebuilt 351w .30 over
BBK 56mm Throttle Body
AEM DryFlow Air Filter
JBA Shorty Headers
Jacobs Ignition
Optima
Transmission:
Rebuilt/updated E4OD
Punisher Valve Body/ Accumulator
Remote filter and Cooler
Temp Sensor
Rear:
8.8 w/ 4:56 and Auburn Pro LS
Autofab Leafs (Nationals)
Camburg 1.5 LT Shackles
(2) 12” SAW 2.5” Shocks (yikes)
Custom 1.75 DOM bolt-on underbody shock hoop
Front:
Camburg Trussed, uniball, and 4” Dana 44 TTB
Camburg heim radius arms
4:56 open
14” SAW 3.0 Triple Bypass
16” SAW 2.5 Coilover
1.75 DOM Sandidge Brothers Engine Cage
Solo 4”-ovcr axles
Warn Premium Hubs (nick)
Misc:
Penhall Fabrication 1.5" Cromo bumpers
Dynomat
Cerullo XR Seats
Borgeson Steering shaft
35” BFG
Mock up (bump stop need to be altered)
Camburg Beams
Old tired 351w
Engine cage
Rear shock mount
Thanks,
Griffin
Rebuilt 351w .30 over
BBK 56mm Throttle Body
AEM DryFlow Air Filter
JBA Shorty Headers
Jacobs Ignition
Optima
Transmission:
Rebuilt/updated E4OD
Punisher Valve Body/ Accumulator
Remote filter and Cooler
Temp Sensor
Rear:
8.8 w/ 4:56 and Auburn Pro LS
Autofab Leafs (Nationals)
Camburg 1.5 LT Shackles
(2) 12” SAW 2.5” Shocks (yikes)
Custom 1.75 DOM bolt-on underbody shock hoop
Front:
Camburg Trussed, uniball, and 4” Dana 44 TTB
Camburg heim radius arms
4:56 open
14” SAW 3.0 Triple Bypass
16” SAW 2.5 Coilover
1.75 DOM Sandidge Brothers Engine Cage
Solo 4”-ovcr axles
Warn Premium Hubs (nick)
Misc:
Penhall Fabrication 1.5" Cromo bumpers
Dynomat
Cerullo XR Seats
Borgeson Steering shaft
35” BFG
Mock up (bump stop need to be altered)
Camburg Beams
Old tired 351w
Engine cage
Rear shock mount
Thanks,
Griffin
Last edited by convoy on Thu Aug 02, 2012 9:11 am, edited 4 times in total.
- Nick
- Founder
- Posts: 3965
- Joined: Sat Dec 05, 2009 12:36 pm
- Bronco Info: 1995 bird poop target
- Location: La Habra Ca.
Re: Convoy's 91 Cruiser
It's about time Brother! This truck in my opinion is one of the nicest 87-91's around!
"If at first you don't succeed, it may be cheaper to buy it."
- bajascott
- My belly is my best friend
- Posts: 2006
- Joined: Mon Dec 07, 2009 11:29 pm
- Bronco Info: its black, its fun to drive,and i dont have enough money to build it the way i want to!:)
- Location: southern oregon
- Contact:
Re: Convoy's 91 Cruiser
i second nick. that is NICE
Re: Convoy's 91 Cruiser
i saw it on the way to a race in lucerne once, and let me tell you that is even better in person! great rig there convoy!
Ollie Penchansky
Penchansky Brothers Racing.
Penchansky Brothers Racing.
-
- Posts: 39
- Joined: Mon Dec 14, 2009 5:32 pm
- Bronco Info: its blue has 450hp ,was built with 3 grand and your mom is jealous
- Location: a happy place
Re: Convoy's 91 Cruiser
Who built that engine cage ? Its very ,very nice
proud supporter of kaveman motorsports .
p.s .
I HAVE A FAN CLUB OF HATERS
p.s .
I HAVE A FAN CLUB OF HATERS
- philofab
- Basura Blanca
- Posts: 5643
- Joined: Tue Dec 08, 2009 9:37 am
- Bronco Info: A pile of crap.
- Location: Bullhead, AZ
- Contact:
Re: Convoy's 91 Cruiser
Is it me or does that 356 have Ford taillights?
Follow me on Instagram. @philofab1 or Youtube https://www.youtube.com/philofab/
- philofab
- Basura Blanca
- Posts: 5643
- Joined: Tue Dec 08, 2009 9:37 am
- Bronco Info: A pile of crap.
- Location: Bullhead, AZ
- Contact:
Re: Convoy's 91 Cruiser
Your illegally parked....convoy wrote:
Follow me on Instagram. @philofab1 or Youtube https://www.youtube.com/philofab/
- yikes
- Founder
- Posts: 4138
- Joined: Sun Dec 06, 2009 7:51 am
- Bronco Info: 1996 with tires and stuff
- Location: Yucaipa, CA
Re: Convoy's 91 Cruiser
Good to have you here Griffin. I agree with Nick. You've got one of the cleanest rigs out there.
Re: Convoy's 91 Cruiser
Thanks for the support. If it wasn't for you guys I would have lost interest a long time ago, but with the fresh ideas and the enthusiasm everyone has been bringing lately it’s become new to me all over again! Years ago there weren’t many options to choose from, but you die hard guys are pushing the industry to make better parts for the TTB and FSB crowd. It’s so inspiring to have dedicated websites just for the FSB and to see more companies not giving up on the TTB.
Griffin
Griffin
Miles Sandidge with Sandidge Brothers Racing built the cage. He did great work and a great guy all around.BLACKMARKETBRYAN wrote:Who built that engine cage ? Its very ,very nice
Re: Convoy's 91 Cruiser
Very nice Bronco, thanks for posting
- magic carpet XLT
- Posts: 145
- Joined: Wed Dec 09, 2009 11:01 pm
- Location: santa cruz
Re: Convoy's 91 Cruiser
i think those frontends look the best. whose fenders? i don't think i've ever seen a nice set of wider glass for these front ends till those. looks like top notch fab work too
start a thread on the porsche, i love those cars!
start a thread on the porsche, i love those cars!
Re: Convoy's 91 Cruiser
Very nice truck! I love that widened front end.
-
- Posts: 22
- Joined: Thu Dec 17, 2009 9:10 pm
- Bronco Info: 84' Bronco, Built 351W, C6, 4.56 gears. 4" over frontend, Walker wheels, 35" Toyo's
- Location: Arroyo Grande, CA
Re: Convoy's 91 Cruiser
Keepin them interested are you Griffin. Your Bronco is what inspired me to go 4 over on my frontend when I saw it a few years back in Barstow. I will always love the 87'-91' body style. My first Bronco 13 years ago was a 89'. The rear fiberglass on your rig is fitted beautifully by the way, keep up the quality it looks fantastic.
Re: Convoy's 91 Cruiser
A few pics of my sound deadening installation. Its the stuff from home depot. I went 2 layers on the floor and wheel wells and 1 to 1 1/2 layers inside the tailgate, b pillars, and doors. Keeps the inside well insulated from the outside elements and also I can finally hear my passengers.
- tcm glx
- Peanut Butter
- Posts: 7303
- Joined: Tue Dec 08, 2009 11:19 am
- Bronco Info: 93 Ford Bronco 5.8
- Location: Riverside Ca
- Contact:
Re: Convoy's 91 Cruiser
Sound deadening looks great.
Quick question, did you spray, or powdercoat your new tailgate?
Quick question, did you spray, or powdercoat your new tailgate?
Re: Convoy's 91 Cruiser
Thanks... had the paint shot on.
Re: Convoy's 91 Cruiser
How long did it take to lay the sound deadner in? Also what brand did you use? I want to do the same thing next weekend.
Looks good!!
Looks good!!
Re: Convoy's 91 Cruiser
I replied to Towerace in a PM, but for those that might have the same question. It's Peel and Seal 6" x 25' ($14.93) from Lowes. I applied approx. 8 rolls using a blow dryer and a heavy duty roller. Took 2 days including removing all interior and scrubbing, rinsing all the dirt and dust out.
- tcm glx
- Peanut Butter
- Posts: 7303
- Joined: Tue Dec 08, 2009 11:19 am
- Bronco Info: 93 Ford Bronco 5.8
- Location: Riverside Ca
- Contact:
Re: Convoy's 91 Cruiser
Awesome job on that.
So are we anticiapting new wheels for the cruiser as well.... (saw your other post)
So are we anticiapting new wheels for the cruiser as well.... (saw your other post)
Re: Convoy's 91 Cruiser
Oh man I want to, just got to wait longer I guess