Ryan's '96
- Needles929
- Posts: 170
- Joined: Thu Sep 14, 2017 10:11 am
- Bronco Info: 95 Part Deux
- Location: Mesa AZ
- Becks_Bronco
- Posts: 1244
- Joined: Sun Dec 20, 2009 2:12 pm
- Bronco Info: 96 Eddie Bauer, 5.8
- Location: Antioch
Re: Ryan's '96
Those work awesome, and theyre so easy to just pop out when you don't want them in the way
- RyanDS650X
- Posts: 1867
- Joined: Sun Dec 13, 2009 11:13 am
- Bronco Info: Autofab '96 XLT 5.8
- Location: Mesa, AZ
- Contact:
Ryan's '96
The round ones are pretty sweet I love the low profile of them. Picked up 2 new husky totes from home depot too. My action packs were hammered and cracked. The hunskys are nice and like the clear lid, they also fit 2 wide on my table that goes on my spare like inthe above pic for gofast trips.
Sent from my SM-G960U using Tapatalk
Sent from my SM-G960U using Tapatalk
- Becks_Bronco
- Posts: 1244
- Joined: Sun Dec 20, 2009 2:12 pm
- Bronco Info: 96 Eddie Bauer, 5.8
- Location: Antioch
Re: Ryan's '96
I ditched my action packers for Front Runner Outfitter Wolf Packs. They stack like legos, and they have vertical sides, inside and out. My action packers took up a lot more space than they could hold because of the slanted sides and the large lip around the lid. https://www.frontrunneroutfitters.com/e ... -pack.html
I like the clear lids on those husky totes.
I like the clear lids on those husky totes.
Ryan's '96
RyanDS650X wrote:The round ones are pretty sweet I love the low profile of them. Picked up 2 new husky totes from home depot too. My action packs were hammered and cracked. The hunskys are nice and like the clear lid, they also fit 2 wide on my table that goes on my spare like inthe above pic for gofast trips.
I’d that a full size table?
Sent from my iPhone using Tapatalk
- RyanDS650X
- Posts: 1867
- Joined: Sun Dec 13, 2009 11:13 am
- Bronco Info: Autofab '96 XLT 5.8
- Location: Mesa, AZ
- Contact:
Re: Ryan's '96
Its 6' when open.crisis88 wrote:RyanDS650X wrote:The round ones are pretty sweet I love the low profile of them. Picked up 2 new husky totes from home depot too. My action packs were hammered and cracked. The hunskys are nice and like the clear lid, they also fit 2 wide on my table that goes on my spare like inthe above pic for gofast trips.
I’d that a full size table?
Sent from my iPhone using Tapatalk
Sent from my SM-G960U using Tapatalk
- RyanDS650X
- Posts: 1867
- Joined: Sun Dec 13, 2009 11:13 am
- Bronco Info: Autofab '96 XLT 5.8
- Location: Mesa, AZ
- Contact:
Ryan's '96
Quick run out to sycamore Creek to check out the water flow after all the rains. Lots of traction and lots of skinny pedal!
Sent from my SM-G960U using Tapatalk
Sent from my SM-G960U using Tapatalk
- entity-unknown
- Posts: 61
- Joined: Wed May 22, 2019 3:40 pm
- Bronco Info: 87 Bronco 302 HO w/ MAF/AOD owned since 2001.
Re: Ryan's '96
I was up there yesterday. I live in East Mesa so Sycamore is kinda my backyard. Where you at? Wanna trail sometime?
- RyanDS650X
- Posts: 1867
- Joined: Sun Dec 13, 2009 11:13 am
- Bronco Info: Autofab '96 XLT 5.8
- Location: Mesa, AZ
- Contact:
Re: Ryan's '96
Power and McDowell. Ya im down anytime.entity-unknown wrote:I was up there yesterday. I live in East Mesa so Sycamore is kinda my backyard. Where you at? Wanna trail sometime?
Sent from my SM-G960U using Tapatalk
Re: Ryan's '96
Went up four peaks a couple weeks ago was fantastic.
- entity-unknown
- Posts: 61
- Joined: Wed May 22, 2019 3:40 pm
- Bronco Info: 87 Bronco 302 HO w/ MAF/AOD owned since 2001.
Re: Ryan's '96
Rock on! I'm on University and Signal Butte. I need some trail buddies cuz goin out alone can be sketchy and bein with Broncos is always better I'm seein if I can get a flat bed and diesel to haul my Bronco to the Stampede this coming weekend but yeah I'll let you know when I hit a trail and feel free to let me know too. Are you goin to the Stampede?
- S00TLYFE
- Posts: 1068
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Ryan's '96
Tony toldRyanDS650X wrote:Installed my new tie downs today from uscargo. They're the aviation style spring loaded type and worked out great. Getting ready for the SF250.
Sent from my SM-G960U using Tapatalk
Me about those tie downs, they’re bad ass I run one in the bed of my truck as well.
Sent from my iPhone using Tapatalk
- RyanDS650X
- Posts: 1867
- Joined: Sun Dec 13, 2009 11:13 am
- Bronco Info: Autofab '96 XLT 5.8
- Location: Mesa, AZ
- Contact:
Ryan's '96
Annual window motor and gear service today. Also installed 8/32 nutserts in the shitty old wood screw holes that hold the access cover down. Came out tits.
Sent from my SM-G960U using Tapatalk
Sent from my SM-G960U using Tapatalk
- Becks_Bronco
- Posts: 1244
- Joined: Sun Dec 20, 2009 2:12 pm
- Bronco Info: 96 Eddie Bauer, 5.8
- Location: Antioch
Re: Ryan's '96
Nutserts are the jam. I've been using those things everywhere i can to replace the shitty self tapper wood screws ford used.
- Becks_Bronco
- Posts: 1244
- Joined: Sun Dec 20, 2009 2:12 pm
- Bronco Info: 96 Eddie Bauer, 5.8
- Location: Antioch
Re: Ryan's '96
What is your normal routine with the rear window?
- RyanDS650X
- Posts: 1867
- Joined: Sun Dec 13, 2009 11:13 am
- Bronco Info: Autofab '96 XLT 5.8
- Location: Mesa, AZ
- Contact:
Ryan's '96
Vacuum all the loose dirt out. Simple green and a scuff pad to clean the old grease and grit off the parts that move and touch. Then a thin coat of grease (whatever is in my grease gun) on those same areas once they're clean. I move the glass down half way to get all the surfaces cleaned and re greased also. Windex glass inside and out then reassemble. I can always tell when it's due for a cleaning because the glass will chatter when rolling it up about 3/4 of the way up and slow down.
Sent from my SM-G960U using Tapatalk
Sent from my SM-G960U using Tapatalk
- RyanDS650X
- Posts: 1867
- Joined: Sun Dec 13, 2009 11:13 am
- Bronco Info: Autofab '96 XLT 5.8
- Location: Mesa, AZ
- Contact:
Ryan's '96
Time for some shock service. Ordered 2 seal kits from shockseals.com for my SAW 2.5s on the rear. Thanks for the coozie Kritter!
Sent from my SM-G960U using Tapatalk
Sent from my SM-G960U using Tapatalk
- RyanDS650X
- Posts: 1867
- Joined: Sun Dec 13, 2009 11:13 am
- Bronco Info: Autofab '96 XLT 5.8
- Location: Mesa, AZ
- Contact:
Ryan's '96
More shock service, Bilsteins this time. Finally got a look inside the ACV on the resi's but forgot to take pictures... pretty unique with a separate piston and valve stacks with the compression side having a spring loaded valve. Both limit straps were over stretched allowing the u joints to bind and passenger axel shaft to rub the window. Got 2 new straps and I'm still playing with ride height.
Sent from my SM-G960U using Tapatalk
Sent from my SM-G960U using Tapatalk
- RyanDS650X
- Posts: 1867
- Joined: Sun Dec 13, 2009 11:13 am
- Bronco Info: Autofab '96 XLT 5.8
- Location: Mesa, AZ
- Contact:
Ryan's '96
Pics
Sent from my SM-G960U using Tapatalk
Sent from my SM-G960U using Tapatalk
- Needles929
- Posts: 170
- Joined: Thu Sep 14, 2017 10:11 am
- Bronco Info: 95 Part Deux
- Location: Mesa AZ