GoFastBroncos.com

Picked up a first gen expedition console, seen a lot of forums talking about these and the 04-08 ones. Plan is to mount my GPS and race radio in it, and actually have cup holders in my truck. (95 F-150)

Unfortunately I havent found one yet that has a detailed description on how people have been mounting them or even an actual completed forum. Does anyone have any insight to offer?

Tony did this in his bronco I'm pretty sure. Hit him up as he may have pics

I did the 04-08 console in mine. Trimmed a little off the front to match the dash. The stock mounts for the console sat perfectly on the floor once the carpet was cut away. Just need to drill for nutserts or self tappers or however you want to fasten it down.

Sent from my SM-G928V using Tapatalk

cwrisley wrote:I did the 04-08 console in mine. Trimmed a little off the front to match the dash. The stock mounts for the console sat perfectly on the floor once the carpet was cut away. Just need to drill for nutserts or self tappers or however you want to fasten it down.

Sent from my SM-G928V using Tapatalk

Thanks Chris, gonna try at least starting to mock mine up this weekend when i get home from chicago.

04-08 Console on mine. Jose did the 97-03. Newer one is taller and slightly wider, but both work well.

Thanks tony, managed to muck through fsb and get some good pictures of my first gen style console in some trucks, should work ok, need to figure out how I’m gonna secure my lowrance.

Also, photo bucket is garbage for ruining literally every car/truck thread ever.

Just make your own. 12” sub in a sealed box plus an amp. Huge storage compartment and 6 cup holders. Was pretty easy to make.

Already have an Ex console haha

This is the forum post on FSB that I followed for my center console install

http://www.fullsizebronco.com/forum/7-1 ... ronco.html

I guess i'm just going to turn this thread into the Expedition Console master thread. I picked up a 03-06 Console i'll be putting in my Bronco.

I am going to have a friend with CAD and 3D printing access work up some replacement panels where the cigarette lighter is now, and make blanks for switches to just snap in. I might also work up a plate that covers the whole cubby, but bolts in like stock to mount radios or switches as well. Let me know if anyone is interested and i'll see what kind of costs are involved.

I also have one waiting to be installed. Just finished painting it last week. Your idea for the switch panel sounds pretty good. Keep us posted.

Beck did your friend ever come up with a panel?

24hours wrote: ↑

Sun Jun 14, 2020 3:48 pm

Beck did your friend ever come up with a panel?

yep, i actually had a couple 3d printed. I need to send them off to Jeremy.

I’d be interested in seeing one and possibly picking one up. (406) 802-2429