ATTN Newbs.
-
- Posts: 15
- Joined: Thu Feb 01, 2018 9:04 am
- Bronco Info: 95 F150 prerunner/ overland project
- Location: Sun Valley, CA
- Contact:
Re: ATTN Newbs.
Hi my name is Brian Shinn. I am currently building a 95 F150 sleeper prerunner/overland truck. The suspension was taken from a 83 bronco project that stalled and was neglected for a few years. I plan to start a build thread on soon. If anyone needs a complete pretty straight bronco body or powder coated frame I am currently trying to dispose of it’s already loaded on a trailer and I will deliver it anywhere in the LA area FREE! Let me know.
- Needles929
- Posts: 170
- Joined: Thu Sep 14, 2017 10:11 am
- Bronco Info: 95 Part Deux
- Location: Mesa AZ
Re: ATTN Newbs.
Can you post a few pics?Bsbronco wrote:Hi my name is Brian Shinn. I am currently building a 95 F150 sleeper prerunner/overland truck. The suspension was taken from a 83 bronco project that stalled and was neglected for a few years. I plan to start a build thread on soon. If anyone needs a complete pretty straight bronco body or powder coated frame I am currently trying to dispose of it’s already loaded on a trailer and I will deliver it anywhere in the LA area FREE! Let me know.
95 Part Deux. Starting from scratch.
- Needles929
- Posts: 170
- Joined: Thu Sep 14, 2017 10:11 am
- Bronco Info: 95 Part Deux
- Location: Mesa AZ
Re: ATTN Newbs.
Haha! Too soon. I see it in the for sale section.Needles929 wrote:Can you post a few pics?Bsbronco wrote:Hi my name is Brian Shinn. I am currently building a 95 F150 sleeper prerunner/overland truck. The suspension was taken from a 83 bronco project that stalled and was neglected for a few years. I plan to start a build thread on soon. If anyone needs a complete pretty straight bronco body or powder coated frame I am currently trying to dispose of it’s already loaded on a trailer and I will deliver it anywhere in the LA area FREE! Let me know.
95 Part Deux. Starting from scratch.
- RyanDS650X
- Posts: 1867
- Joined: Sun Dec 13, 2009 11:13 am
- Bronco Info: Autofab '96 XLT 5.8
- Location: Mesa, AZ
- Contact:
Re: ATTN Newbs.
If you'd come to Blythe with it I know a guy who would take it.
'96 XLT 5.8l lil edelbrock, lil Autofab, LOTTA fun.
"I wouldnt even call adding beer as part of a prep...its like putting tires on the vehicle, you just do it."
-shockseals.com
"I wouldnt even call adding beer as part of a prep...its like putting tires on the vehicle, you just do it."
-shockseals.com
-
- Posts: 18
- Joined: Sun May 05, 2019 2:02 pm
- Bronco Info: 94 bronco 5.8l lightning engine e4od trans 8.8 rear end
- Location: OAK HILLS,CA
Re: ATTN Ne
What’s up people....just picked up my first bronco about 6 months...it’s a 94 bronco has a 5.8l lightning engine with a e40d and a shift kit the harder Im on the throttle the harder it kicks me in the back...not sure I like that to much..I’m guessing a super lift kit on it with drop brackets on front and blocks in the rear..I’m guessing around 8 inch???...also has the super lift super runner steering linkage..and not to forget it’s got a body lift also....as of now just trying to fix the lil leaks and get her cleaned up...with the body lift found no thermostat in it due to not relocating the fan Schroud/radiator to keep it cool enough...with that started to replace all leaking coolant lines had to pull the upper intake to find another leak and to also replace all the plastic vacuum lines...hopefully this is just enough to get going and drive this girl for some more time....I did drive her home just can’t stand a simple oil leak or a dirty spot to work in....
- 4lowLance
- Posts: 18
- Joined: Tue Jul 14, 2020 10:32 pm
- Bronco Info: 1995 f150 ext cab short bed. 351 auto 4x4
- Location: ojai, CA
Re: ATTN Newbs.
Hey all,
First post here, I live in Ventura county California. I go by the same name on Instagram. I’m building a 95 f150 4x4. I had a dodge for 9 years and loved it, but wanted something more agile. I will start a build thread in the non bronco forum soon. Here is a pic of the dodge I built, drove to the Arctic Ocean, enjoyed for years, then sold in May.
Cummins, 37s, king 2.5s, radius arms, hydro assist steering etc.
And my new truck, coil overs, C/T beams, Deaver q80s ect
First post here, I live in Ventura county California. I go by the same name on Instagram. I’m building a 95 f150 4x4. I had a dodge for 9 years and loved it, but wanted something more agile. I will start a build thread in the non bronco forum soon. Here is a pic of the dodge I built, drove to the Arctic Ocean, enjoyed for years, then sold in May.
Cummins, 37s, king 2.5s, radius arms, hydro assist steering etc.
And my new truck, coil overs, C/T beams, Deaver q80s ect
- Attachments
-
- DF3BE877-9D6D-422A-A6D9-929422C1B489.jpeg (286.28 KiB) Viewed 12849 times
-
- DBA051EF-2EC7-4605-9F4A-063976347418.jpeg (533.57 KiB) Viewed 12849 times
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: ATTN Newbs.
Cool dodge and even cooler Ford. Based on the build thread it looks like you're off to a very nice start!
Owner of only dead and forgotten projects
- robertcrav
- Let me google that for you
- Posts: 4313
- Joined: Thu Jan 13, 2011 8:06 am
- Bronco Info: Lana - Stock width c/t coil-overs/bypasses -- Sylvia - Stock width 4" Rancho kit on Billies
- Location: South O.C.
- Contact:
Re: ATTN Newbs.
Welcome, and nice trucks!
Sent from my SM-N975U using Tapatalk
Sent from my SM-N975U using Tapatalk
- Becks_Bronco
- Posts: 1244
- Joined: Sun Dec 20, 2009 2:12 pm
- Bronco Info: 96 Eddie Bauer, 5.8
- Location: Antioch
Re: ATTN Newbs.
Im just gonna x2 Steve!ChaseTruck754 wrote: ↑Mon Sep 14, 2020 10:27 pmCool dodge and even cooler Ford. Based on the build thread it looks like you're off to a very nice start!
-
- Posts: 1
- Joined: Tue Jul 07, 2020 9:50 pm
- Bronco Info: 89 bronco prerunner build in progress
Re: ATTN Newbs.
Hey guys. Alex here from San Diego. Looking to start my prerunner bronco headache/build. Hopefully I’ll be able to post my journey on here haha. Have a a good one.
- Attachments
-
- 787728AB-E433-49B3-B93C-0F5330CC2171.jpeg (467.12 KiB) Viewed 12558 times