Belt sanders and drill press
Posted: Tue Oct 03, 2017 12:34 am
I'm helping my aunt sell of some of my grandfather's old tools. All of this stuff was light use in a personal shop. My grandfather was a carver & used used the sanders to shape pieces.
This stuff is currently located on Balboa Island in Newport Beach, but I can get it to Huntington to my place if that would help
1st tools is a 6"x48" belt & a 9" disc sander combo on a stand. Has a 3/4 HP motor that is 110v or 220v single phase. Build date 1986. Made by A. J. Tools "Pit Bull" - made in Taiwan. Couldn't find any info on this brand, but I'm assuming it may be similar to harbor freight, although it seems a little better. Quality brand sanders like this are in the $450-500 range. Harbor freights is $220, so I'll ask $150. We may have some spare belts & disks around which you can have with it if we come across them.
2nd is a smaller sander. It's also an A. J. Tools "Pit Bull" - made in Taiwan. It's a 1"x42" belt & a 6" (may be an 8"??) disc sander combo. Has a 1/2 HP motor that is 110v single phase. Build date 1986. There should be extra sanding belts around to go with this one. Jet's version of this looks to be $400 and the Grizzly version is $115 so I'll ask $60 for this one.
Notice the error on disk size? Plate shows a 1x8"belt & 42" disk...
Last is a sweet, OLD, Rockwell Delta "Homecraft" drill press. From my research it sure looks like an 11-120, 11" press. Made in the 40's. I'd love to hang on to this for the history & shear cool factor of it, but my garage is already over stuffed with tools I hardly get to touch anymore... Asking $100 for this
This stuff is currently located on Balboa Island in Newport Beach, but I can get it to Huntington to my place if that would help
1st tools is a 6"x48" belt & a 9" disc sander combo on a stand. Has a 3/4 HP motor that is 110v or 220v single phase. Build date 1986. Made by A. J. Tools "Pit Bull" - made in Taiwan. Couldn't find any info on this brand, but I'm assuming it may be similar to harbor freight, although it seems a little better. Quality brand sanders like this are in the $450-500 range. Harbor freights is $220, so I'll ask $150. We may have some spare belts & disks around which you can have with it if we come across them.
2nd is a smaller sander. It's also an A. J. Tools "Pit Bull" - made in Taiwan. It's a 1"x42" belt & a 6" (may be an 8"??) disc sander combo. Has a 1/2 HP motor that is 110v single phase. Build date 1986. There should be extra sanding belts around to go with this one. Jet's version of this looks to be $400 and the Grizzly version is $115 so I'll ask $60 for this one.
Notice the error on disk size? Plate shows a 1x8"belt & 42" disk...
Last is a sweet, OLD, Rockwell Delta "Homecraft" drill press. From my research it sure looks like an 11-120, 11" press. Made in the 40's. I'd love to hang on to this for the history & shear cool factor of it, but my garage is already over stuffed with tools I hardly get to touch anymore... Asking $100 for this