I've got a second, Roper Whitney (now Whitney Jensen) metal punch I'm ready to part with. Just no need for 2 as I'm a one man shop, that isn't putting out much work anymore...
This is a "small" punch with a high capacity. Downfall is throat depth, but it's perfect for tabs, etc.
This is the #20 punch = 20 ton. It's a 1/2" hole through 1/2" plate capacity, although I've never tested it on anything that thick. I do know it'll do 1/4" stuff no problem.
Die sizes for this range from I believe 1/8" up to 13/16". They are available at roperwhitney.com
I'm selling this one with a 9/16" die included, and it can also come with a 1/2" and/or an 11/16" die at a bit of extra cost.
In checking just now there are 2 of these for sale on CL in So. Cal. 1 is at $350 with a base & 4 die sets:
http://losangeles.craigslist.org/sfv/tl ... 64999.html
The second is at $280 with no dies.
http://inlandempire.craigslist.org/tls/4615848301.html
Here I'm asking $175 for the punch & 9/16" die & then $200 for punch & 2 dies or $220 for punch & 3 dies. Haven't posted on CL yet, but thinking I'll be pricing it higher there just for the annoyance factor of some of the flakes there. It'll also hit RDC & DR soon, but figured I'd give guys here a 1st shot.
Here's pics of the one for sale:
metal punch - perfect for making tabs, etc.
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
metal punch - perfect for making tabs, etc.
You do not have the required permissions to view the files attached to this post.
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: metal punch - perfect for making tabs, etc.
Here's a pic of the one I'm keeping in the hitch mount setup I made for my table.
Before making the above mount I just clamped the thing in the vise & it worked just fine. My vise also hooks into that hitch receiver on my table though, so this saved a step of getting that out.
You can also easily make a mount to permanently bolt it to a table. I just like the portability of this way.
Before making the above mount I just clamped the thing in the vise & it worked just fine. My vise also hooks into that hitch receiver on my table though, so this saved a step of getting that out.
You can also easily make a mount to permanently bolt it to a table. I just like the portability of this way.
You do not have the required permissions to view the files attached to this post.
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: metal punch - perfect for making tabs, etc.
Almost forgot - if you happen to live far away & are interested, this sucker looks like it'll fit in a medium size, flat rate box from USPS, so shipping anywhere in the US will be under $20!!!
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: metal punch - perfect for making tabs, etc.
sale pending