For sale abrasives and burr king belts

[Rmc]

For sale misc abrasive belts for burr king. Some 60 grit, some scotch brite red, misc Bosch screw on scour pads and grinding wheels. Make offer.

[ChaseTruck754]

Size?

My guess is 2" x 60" but if they happen to be 2" x 48 I'm interested.

[Bondobob]

If they are 60" I'd be interested.

[Rmc]

I'll get u guys some measurements, I believe there 2 inches wide but ill confirm. Ill also get u guys an arbor diameter/ disc diameter for the other wheels. I have no burr king just got this stuff in a combo auction deal.

[ChaseTruck754]

The belts may have the dimension on the inside of them.

I can see a 36 in the pic above, but are there any other grits for the belts? And are the scotchbrite belts the same size as the sanding belts?

Also - can you get any pics of the "screw on scour pads" and do you have any scotchbrite type "grinding" wheels in the lot?

[Rmc]

I'll go have a look.

[Rmc]

Qty 8 scotch brite red belts 1.5x60"wide,qty11 36grit sanding belts 2"x60, qty 11 4.5dia grinding wheels screw on arbor type 5/8-11 thread, qty 9 part off wheels 5/8-11 screw on arbor type, all grinding wheels Bosch brand, scour pads unknown. Scour pads will need some type of arbor or holding device. Qty 24 on scour pads 4 in dia 1/2 in thick.

[Rmc]

...misc drum sander stuff too, 1.5 and 1 inch dia.

[ChaseTruck754]

Damn - all yours Bob!

I may be interested in some of the 1" drums and grinding disks/parting wheels depending on what you want for them. That's about all that will work for me though

[Rmc]

I'm open to trades also, I'm looking for any 5 on 5.5 17x8 or 8.5 wheel, steering wheel, seats , bumps, bump cans, storage boxes ( action packer type), let me know what's floating around your spare parts piles. I can throw cash on my end for the right deal. I also need a tig peda( 14 pin miller)l, empty owned ( not rented)gas cylinder, tt style swaybar/ arms ect, autometer gauges, 14 inch coil overs, let me know what this stuff is worth to whoever wants it. Pm me if u like.

[Rmc]

A new working condition bronco factory air ac compressor is on my "to acquire" list also. R134a. Also a beadroller, bench top brake, lathe insert tools, 5c collet set, pretty much anything.

[Rmc]

Bump. Trade pending on sanding belts.

[Rmc]

Bump

[Rmc]

Belts have been gone a while, still have the other abrasives.

[Rmc]

Bump