Misc. tools (LOTS!) - band saw & punch

[ChaseTruck754]

Doing a bit of cleaning again & it's time to get rid of some tools I have doubles of.

I'm also possibly open to trades so PM me with what you got on those.


Pics are below, but here's the list with prices:
Wood cutting band saw. Chinese import, but would be fine for garage shop. Was going to add some pulleys to slow it down for steel cutting, but I ended up with a steel cutting one so no need for 2.
Harbor freight's version is $460 normally & is on sale for $360 now therefore I think $275 for mine is reasonable.

Whitney Punch - #10 - $50. No dies included unfortunately (I have 2 of these so am keeping all dies i have for it.)
link for some info if you don't know what this is. http://roperwhitney.com/punching/2-89.cfm

SOLDhose reel for an air hose. Comes with crappy air hose on it - $20SOLD

SOLDTable - It's a TIG welded base with a +/-30" x 30" wood top & it's 40" tall. The wood is a nice veneered piece about 3" thick & there is also a trailer hitch receiver welded on the thing to be a "quick removal" type mount for vices, etc. - asking $100.SOLD

SOLDcraftsman side box for your tool box. It's a 6 drawer deal they charge $75 - $100 for. I'm asking $45 for mine. The rest of the tool box is not for sale at this point. SOLD

SOLDradial arm drill press - comes with stand but not plastic bins in pic. It's made by HEC. I couldn't find this online & only found 3 like it available. 1 of the 3 was $380 & the others were right about $300 so I think $200 should work.SOLD

SOLDRyobi random orbit sander - $10SOLD

SOLD2" rough cut endmill. Great if you have a mill or lathe set up for notching tube - $30. It's one of the ones in the upper, right corner of the pic of the tool box drawer.SOLD

SOLDbunch of allen keys - 8mm to 19mm. I have a bunch of small sets that have a 12mm, 17mm, 19mm & 1/2" short & then a 8mm, 12mm, 17mm & 19mm long for $5 each set or less each if you buy more than 1 set!SOLD

SOLDHusky air hammer - pretty much new - $15SOLD

SOLDMill/drill - machine is a "King Midas" - made by Ty Fu Yuan in Tawain in the late 80's. Model # is TFY-515. It's actually a nice/heavy machine for an import. It's got a 5" x 20" table and from what I remember & it looks like the swing is about 12" x 30". The motor is 3/4 horse 1 ph and the taper on it is r8. Comes on custom built stand with drawers built in. Can come with a 1/2" collet if you need it, but not the clamp set seen in the pics.
Harbor freight asks $1200 for their machine about this size so I figure $750 should be fair.SOLD

[ChaseTruck754]

more pics

[ChaseTruck754]

last ones

[ChaseTruck754]

Sale pending on hose reel & mill/drill

Hose reel is a DR guy so who knows.

Mill/drill is a buddy from here who I know is good for it.

[ChaseTruck754]

Hose reel gone!

Also - got a table I think I'm going to be selling as well. I'll get a pic up as soon as I can un-bury the thing! It's a TIG welded base with a +/-3' x 3' wood top. The wood is a nice veneered piece about 3" thick.

[DMbronco]

PM Sent re: the drill press.

Thanks

[ChaseTruck754]

And replied

[ChaseTruck754]

Drill press spoken for at this point.

[DMbronco]

Thanks Steve,

Let me know when you're heading to Temecula and we'll make it happen.

[ChaseTruck754]

Will do Bray. As of now it looks like 1st or 2nd weekend in March will be the next time. I'll keep you posted.

*edit* - also I added a couple items to the 1st post = a table & a small, side craftsman tool box.

[ChaseTruck754]

Sold some stuff at the swapmeet so the list go updated & some pics deleted since they were no longer needed.

[ChaseTruck754]

Sander is now gone.

Table, punch & band saw are what's left at this point.

[ChaseTruck754]

Drill press picked up this weekend - thanks Bray.

Punch, bandsaw & table still here

[ChaseTruck754]

Table gone now.

Band saw & punch still here.