Full Build Bronco 550hp rolling chassis FOR SALE
Posted: Wed Jun 15, 2016 6:51 pm
http://www.gofastbroncos.com/forum/view ... Full+build
For sale I have my full build bronco. I've lost interest in the build. Life changes and it's time to move on. It is an entire rolling chassis. There is is $20k in labor into this not including parts or materials. Everything listed below is what is included. Located in San Diego. The link is the write up on it.
$15k cash or possible trade for something of value in the $20-25k area.
Please email or text for info
760-415-46twotwo
Dkex34@yahoo.com
Powertrain
- Engine
Lq4 vortex 6.0
Lunati cams, lifters and springs
L92 heads
Ls3 corvette intake
575hp
RPM full fabricated headers and Exhaust system
Motor has been pushed back and lowered to allow for lower center of gravity
- Transmission
Th400 using culhane parts
- Transfer case
NP205 built to handle 600hp
Dual Billet shifter to allow for separate front and rear locking.
Chassis/Fab
- Welding
90% of all welding is TIG welded rest is MIG
- Tubing
Uses 1.75" .120 wall Chromoly & DOM main structure tubing
Misc tubes are 1.25"-1.5" .120 wall Chromoly & DOM tubing
- Frame/Chassis
Entire frame is fully boxed and plated front to back
Rear is cut notched and boxed in rear to allow for more up travel
- Sheet Metal
All inner panels have been removed exception of firewall and has been fully sheet metal paneled and bead rolled.
Suspension
- Solo Motorsports
4.5" over per side TTB beams
Full replacement axles (not cut and extended like most)
4:88 gears
- Rear suspension
4 Linked rear suspension
Leduc sway bar and sway bar arms
Parts
- Rearend
Tube works TT rear housing and Jamar custom 5x5.5 full floater hubs
- Front knuckles
BMS fabricated front knuckles
BMS custom 5x5.5 front hubs to allow for 14" rotor
- Radiator & Coolers
CBR custom size radiator w/ dual 18" fans
CBR large oil cooler
CBR large trans cooler
- Fuel Cell
45 gallon Fuel Safe fuel cell
- Intake
UMP intake system
- Tires & Wheels
(5) 37" BFG projects
(5) Method Beadlock Wheels
- Fiberglass
McNeil Racing 6" over and raised front and rear fenders
McNeil Racing induction fiberglass hood
- Misc Parts
Sparco disconnect steering wheel, dual fuel pump setup and k&n fuel filter, full replacement headlight and taillights, Art Carr shifter, I have box's full of misc parts And new molding.
For sale I have my full build bronco. I've lost interest in the build. Life changes and it's time to move on. It is an entire rolling chassis. There is is $20k in labor into this not including parts or materials. Everything listed below is what is included. Located in San Diego. The link is the write up on it.
$15k cash or possible trade for something of value in the $20-25k area.
Please email or text for info
760-415-46twotwo
Dkex34@yahoo.com
Powertrain
- Engine
Lq4 vortex 6.0
Lunati cams, lifters and springs
L92 heads
Ls3 corvette intake
575hp
RPM full fabricated headers and Exhaust system
Motor has been pushed back and lowered to allow for lower center of gravity
- Transmission
Th400 using culhane parts
- Transfer case
NP205 built to handle 600hp
Dual Billet shifter to allow for separate front and rear locking.
Chassis/Fab
- Welding
90% of all welding is TIG welded rest is MIG
- Tubing
Uses 1.75" .120 wall Chromoly & DOM main structure tubing
Misc tubes are 1.25"-1.5" .120 wall Chromoly & DOM tubing
- Frame/Chassis
Entire frame is fully boxed and plated front to back
Rear is cut notched and boxed in rear to allow for more up travel
- Sheet Metal
All inner panels have been removed exception of firewall and has been fully sheet metal paneled and bead rolled.
Suspension
- Solo Motorsports
4.5" over per side TTB beams
Full replacement axles (not cut and extended like most)
4:88 gears
- Rear suspension
4 Linked rear suspension
Leduc sway bar and sway bar arms
Parts
- Rearend
Tube works TT rear housing and Jamar custom 5x5.5 full floater hubs
- Front knuckles
BMS fabricated front knuckles
BMS custom 5x5.5 front hubs to allow for 14" rotor
- Radiator & Coolers
CBR custom size radiator w/ dual 18" fans
CBR large oil cooler
CBR large trans cooler
- Fuel Cell
45 gallon Fuel Safe fuel cell
- Intake
UMP intake system
- Tires & Wheels
(5) 37" BFG projects
(5) Method Beadlock Wheels
- Fiberglass
McNeil Racing 6" over and raised front and rear fenders
McNeil Racing induction fiberglass hood
- Misc Parts
Sparco disconnect steering wheel, dual fuel pump setup and k&n fuel filter, full replacement headlight and taillights, Art Carr shifter, I have box's full of misc parts And new molding.