1982 F150 stepside 4x4
- Tchajagos
- Posts: 2124
- Joined: Sat Dec 17, 2011 11:07 am
- Bronco Info: 1993 xlt stock on 33' BFGs
- Location: Murrieta
1982 F150 stepside 4x4
Super rad truck! 1982 f150 reg cab stepside short bed. 4x4!!! Auto with manual xfer case. I think it's a 5.0 V8. Not really sure, might be 5.8. The body is rust free and straight. One dent on the whole truck which is on the roof and can be popped out. I might just do that. The paint is some kind of dark green or teal. Clear coat pealing off though. The bed is perfect. No dents or cracks at all. The interior is a bit dirty. Dash is cracked and a rip in the seat on driverside (typical wear) the door panels are not cracked but can use a cleaning. All windows are good with no cracks. Doors all work. Has tilt steering wheel and factory ac. Has. 85k in the tach. Engine turns freely
The axles are D44 TTB up front with the very hard to find bolt in passenger axle that everyone wants. 6 bolt snouts. The rear is a ford 9" 31 spline full size width.
The bad:
-missing a few parts.
-driverside head
-radiator+hoses
-distributor
-power steering pump
-alternator
-water pump
-battery
Pros-
-Hard to find the stepside beds in this perfect of condition.
-v8
-auto
-4x4!!!!
-factory ac
-looks rad
-will drop panties.
Looking to get $2000 for this sweet ride. Sold as is for parts with bill of sale. I can get a title but it will be a few weeks and I will need a deposit. If I can't sell in a few weeks I am gonna part it out and bring in more than that. If you want to buy the truck I would be happy to install any parts that you bring me to get it running. I would even be willing to grab the parts from the pick a part for the cost of the parts.
The axles are D44 TTB up front with the very hard to find bolt in passenger axle that everyone wants. 6 bolt snouts. The rear is a ford 9" 31 spline full size width.
The bad:
-missing a few parts.
-driverside head
-radiator+hoses
-distributor
-power steering pump
-alternator
-water pump
-battery
Pros-
-Hard to find the stepside beds in this perfect of condition.
-v8
-auto
-4x4!!!!
-factory ac
-looks rad
-will drop panties.
Looking to get $2000 for this sweet ride. Sold as is for parts with bill of sale. I can get a title but it will be a few weeks and I will need a deposit. If I can't sell in a few weeks I am gonna part it out and bring in more than that. If you want to buy the truck I would be happy to install any parts that you bring me to get it running. I would even be willing to grab the parts from the pick a part for the cost of the parts.
- otter
- Posts: 534
- Joined: Sun Sep 04, 2011 8:57 pm
- Bronco Info: Currently in a holding pattern
- Location: Hawaii
Re: 1982 F150 stepside 4x4
My dream truck! If I wasn't moving to Hawaii, this would be in my garage already. If its still for sale in 3 yrs, I'll take it.
- Tchajagos
- Posts: 2124
- Joined: Sat Dec 17, 2011 11:07 am
- Bronco Info: 1993 xlt stock on 33' BFGs
- Location: Murrieta
1982 F150 stepside 4x4
It's a really cool truck. I ran the door codes to make sure what it has. It has the 5.0 V8 and a C6 auto trans. The rear 9" is limited slip with 3.50 gears.
- robertcrav
- Let me google that for you
- Posts: 4313
- Joined: Thu Jan 13, 2011 8:06 am
- Bronco Info: Lana - Stock width c/t coil-overs/bypasses -- Sylvia - Stock width 4" Rancho kit on Billies
- Location: South O.C.
- Contact:
- Tchajagos
- Posts: 2124
- Joined: Sat Dec 17, 2011 11:07 am
- Bronco Info: 1993 xlt stock on 33' BFGs
- Location: Murrieta
1982 F150 stepside 4x4
they are pretty cool.
- Tchajagos
- Posts: 2124
- Joined: Sat Dec 17, 2011 11:07 am
- Bronco Info: 1993 xlt stock on 33' BFGs
- Location: Murrieta
1982 F150 stepside 4x4
If anyone is interested in parts off this truck I will more than likely be parting it out next week if no one wants it whole.
Front D44 knuckles/spindles/calipers/rotors/hubs - $200 for the pair
Rear 9" 3.50 gears limited slip - $500
C6 4x4 auto trans w/ converter -$300
Manual transfer case - $200
Step side bed - $500
Cab/doors/interior - $200
Front clip - $200
Short wheelbase 4x4 frame - $200
Front D44 knuckles/spindles/calipers/rotors/hubs - $200 for the pair
Rear 9" 3.50 gears limited slip - $500
C6 4x4 auto trans w/ converter -$300
Manual transfer case - $200
Step side bed - $500
Cab/doors/interior - $200
Front clip - $200
Short wheelbase 4x4 frame - $200
-
- Posts: 1677
- Joined: Mon Mar 03, 2014 8:45 am
- Bronco Info: 1996 EB 351W!! First Bronco!! Plan: Prerunner/ Trail Rig/ SHTF All around Rig
Re: 1982 F150 stepside 4x4
Someone needs to pick this thing up whole and built her right
- robertcrav
- Let me google that for you
- Posts: 4313
- Joined: Thu Jan 13, 2011 8:06 am
- Bronco Info: Lana - Stock width c/t coil-overs/bypasses -- Sylvia - Stock width 4" Rancho kit on Billies
- Location: South O.C.
- Contact:
Re: 1982 F150 stepside 4x4
how much would someone charge to put my drivetrain and suspension under this thing???
- Tchajagos
- Posts: 2124
- Joined: Sat Dec 17, 2011 11:07 am
- Bronco Info: 1993 xlt stock on 33' BFGs
- Location: Murrieta
1982 F150 stepside 4x4
I would feel so bad having to part out this all original truck.
-
- Posts: 1677
- Joined: Mon Mar 03, 2014 8:45 am
- Bronco Info: 1996 EB 351W!! First Bronco!! Plan: Prerunner/ Trail Rig/ SHTF All around Rig
Re: 1982 F150 stepside 4x4
If I wasn't building my bronco I would scoop this thing up! I have a ton of parts I can use on it too lol!! Don't Part It out!!!
1982 F150 stepside 4x4
Does the $200 for the front d44 include the third? I'll take it. Or how much for it?
- Tchajagos
- Posts: 2124
- Joined: Sat Dec 17, 2011 11:07 am
- Bronco Info: 1993 xlt stock on 33' BFGs
- Location: Murrieta
1982 F150 stepside 4x4
3rd is spoken for already. $200 is for the knuckles out.
-
- Posts: 969
- Joined: Tue Aug 13, 2013 10:56 am
- Bronco Info: 1990 Bronco lifted, 1995 Centurian F-150 with body lift delete
Re: 1982 F150 stepside 4x4
I will just leave this here. This is my old step side sleeper that I should have never sold. Whats the best price would do? Not that I need another project but now my wheels are spinning.
You do not have the required permissions to view the files attached to this post.
Re: 1982 F150 stepside 4x4
Brandon: I think the guy in Tucson that bought the truck is interested in selling it.
Todd Z.
Todd Z.
-
- Posts: 969
- Joined: Tue Aug 13, 2013 10:56 am
- Bronco Info: 1990 Bronco lifted, 1995 Centurian F-150 with body lift delete
Re: 1982 F150 stepside 4x4
Really? Hmm now why did you have to feed the hamster. lol. I do not have any of his contact but if you here about it going up for sale please let me know or give him my number.toddz69 wrote:Brandon: I think the guy in Tucson that bought the truck is interested in selling it.
Todd Z.
Thank you!
Brandon Hollander
760-803-9469
- Tchajagos
- Posts: 2124
- Joined: Sat Dec 17, 2011 11:07 am
- Bronco Info: 1993 xlt stock on 33' BFGs
- Location: Murrieta
1982 F150 stepside 4x4
Brandon that truck looks really good. Is it true that these trucks use the same rear fenders as the duallies? I am actually amazed at how straight the bed is on this one.
-
- Posts: 969
- Joined: Tue Aug 13, 2013 10:56 am
- Bronco Info: 1990 Bronco lifted, 1995 Centurian F-150 with body lift delete
Re: 1982 F150 stepside 4x4
My old flareside was a 1 piece bed side. But yours yes same as dually.Tchajagos wrote:Brandon that truck looks really good. Is it true that these trucks use the same rear fenders as the duallies? I am actually amazed at how straight the bed is on this one.
- Wrightracing.net
- Posts: 2209
- Joined: Thu Oct 28, 2010 9:58 pm
- Bronco Info: 1972 Bronco with an 86 chassis, full cage and Long travel coil-over suspension.
- Location: San Diego
- Contact:
-
- Posts: 1255
- Joined: Mon Nov 29, 2010 10:44 pm
- Bronco Info: 93 EB Bronco 12"Over 40" BFG projects 5.13 gears in a 8.8... 1 seat and stripped Interior
- Location: ORANGE CUNTY, COMIFORNIA وس إنجليزي - عربي
1982 F150 stepside 4x4
Do itrobertcrav wrote:how much would someone charge to put my drivetrain and suspension under this thing???