Kel Fab Bronco For Sale
- Kel Fab Creations
- Posts: 727
- Joined: Wed Nov 23, 2011 2:01 pm
- Bronco Info: 95 Bronco
- Location: San Jacinto, Ca
- Contact:
Kel Fab Bronco For Sale
The time has come to move on to another project. I planned on keeping this thing forever but plans have changed so here it is:
95 Bronco, 5.8, 174,000ish miles, manual transfer case.
Runs and drives great, leaks a little oil here and there. I've had it for almost 3 years now. Engine only gets Amsoil Synthetic since I've had it. Just changed the oil, coolant and thermostat. AC and heater work great.
- 3" extended beams and axles. (beams have uniballs) 19" travel bump to strap with working 4x4.
- Wheelbase extended 3” total. 1.5” in front, 1.5” in back
- King 2.5x14" coilovers
- King 2.0 bumps
- radius arms with heims
- radius arm pivot boxes with integrated crossmember
- custom beam pivots
- single swing steering
- econoline steering pump upgrade
- bolt on engine cage with core support stiffeners
- K&N Air Filter
- bolt on front and rear bumpers (rear has receiver)
- HID conversion headlights
- 40" Tough Light LED bar
- 35'' BFG Muds with tons of tread left
- 15x7 custom Kel Fab beadlock wheels
- Race Trim front seats with sliders (Passenger side tilts forward to get in back)
- sound deadener from firewall to tailgate (Even over the rear wheel wells and up the side in rear)
- Maratrac Race Radio
- Fiberwerks fenders front and rear. Both are +3
- Spare tire swinger mounts have been reinforced and safety lock has been added to ensure latch does not accidentally come unlatched when driving. Tire swinger also has flag mount.
- +1.75 wheel spacers in rear
- Giant Motorsports 64 leaf spring kit with Kel Fab hangers and shackles. 19" travel bump to strap.
- King 2.5x12 race series double bypass
- under bed bolt on shock hoop
- extended staineless braided brake lines front and rear
I think that’s about it but I’m probably forgetting something…
This truck has seen the dirt only a handful of times and has only been on one actual trip.
I have personally done all the fabwork on this and have built it thinking I’ll never get rid of it so hopefully that explains a little of the quality of work and time that went into getting it where it is today. Longevity as well as performance were on my mind as I built it.
As of 2-9-15, the only thing this truck needs is a new axle. I bent the one it has now at glamis a couple weeks ago. It doesn’t leak, squeak, clunk, rattle etc. It drives fine but the camber is off pretty bad as the axle tubes are bent. I will be putting a replacement trussed axle under it hopefully in the next couple weeks but if someone wants to buy it before then I’ll take money off to get that replaced.
Complete build thread with tons of pics can be seen at:
http://www.gofastbroncos.com/forum/view ... =33&t=3079
I’m asking $14,500
Not interested in any trades.
Call, text, email , or PM
Kelly
951-85two-870six
kelly_s@kelfabcreations.com
95 Bronco, 5.8, 174,000ish miles, manual transfer case.
Runs and drives great, leaks a little oil here and there. I've had it for almost 3 years now. Engine only gets Amsoil Synthetic since I've had it. Just changed the oil, coolant and thermostat. AC and heater work great.
- 3" extended beams and axles. (beams have uniballs) 19" travel bump to strap with working 4x4.
- Wheelbase extended 3” total. 1.5” in front, 1.5” in back
- King 2.5x14" coilovers
- King 2.0 bumps
- radius arms with heims
- radius arm pivot boxes with integrated crossmember
- custom beam pivots
- single swing steering
- econoline steering pump upgrade
- bolt on engine cage with core support stiffeners
- K&N Air Filter
- bolt on front and rear bumpers (rear has receiver)
- HID conversion headlights
- 40" Tough Light LED bar
- 35'' BFG Muds with tons of tread left
- 15x7 custom Kel Fab beadlock wheels
- Race Trim front seats with sliders (Passenger side tilts forward to get in back)
- sound deadener from firewall to tailgate (Even over the rear wheel wells and up the side in rear)
- Maratrac Race Radio
- Fiberwerks fenders front and rear. Both are +3
- Spare tire swinger mounts have been reinforced and safety lock has been added to ensure latch does not accidentally come unlatched when driving. Tire swinger also has flag mount.
- +1.75 wheel spacers in rear
- Giant Motorsports 64 leaf spring kit with Kel Fab hangers and shackles. 19" travel bump to strap.
- King 2.5x12 race series double bypass
- under bed bolt on shock hoop
- extended staineless braided brake lines front and rear
I think that’s about it but I’m probably forgetting something…
This truck has seen the dirt only a handful of times and has only been on one actual trip.
I have personally done all the fabwork on this and have built it thinking I’ll never get rid of it so hopefully that explains a little of the quality of work and time that went into getting it where it is today. Longevity as well as performance were on my mind as I built it.
As of 2-9-15, the only thing this truck needs is a new axle. I bent the one it has now at glamis a couple weeks ago. It doesn’t leak, squeak, clunk, rattle etc. It drives fine but the camber is off pretty bad as the axle tubes are bent. I will be putting a replacement trussed axle under it hopefully in the next couple weeks but if someone wants to buy it before then I’ll take money off to get that replaced.
Complete build thread with tons of pics can be seen at:
http://www.gofastbroncos.com/forum/view ... =33&t=3079
I’m asking $14,500
Not interested in any trades.
Call, text, email , or PM
Kelly
951-85two-870six
kelly_s@kelfabcreations.com
- otter
- Posts: 534
- Joined: Sun Sep 04, 2011 8:57 pm
- Bronco Info: Currently in a holding pattern
- Location: Hawaii
Re: Kel Fab Bronco For Sale
Finally decided to pull the trigger on selling it.
I love this Bronco. Great price for a Badass rig. GLWS.
I love this Bronco. Great price for a Badass rig. GLWS.
- Kel Fab Creations
- Posts: 727
- Joined: Wed Nov 23, 2011 2:01 pm
- Bronco Info: 95 Bronco
- Location: San Jacinto, Ca
- Contact:
Re: Kel Fab Bronco For Sale
Thanks Pat!
- Kel Fab Creations
- Posts: 727
- Joined: Wed Nov 23, 2011 2:01 pm
- Bronco Info: 95 Bronco
- Location: San Jacinto, Ca
- Contact:
Re: Kel Fab Bronco For Sale
Here's one of the few outside truck action footage have. Not TT status but you can see the suspension doing it's job.
[youtube]https://www.youtube.com/watch?v=qKhUawP ... e=youtu.be[/youtube]
[youtube]https://www.youtube.com/watch?v=qKhUawP ... e=youtu.be[/youtube]
- Kel Fab Creations
- Posts: 727
- Joined: Wed Nov 23, 2011 2:01 pm
- Bronco Info: 95 Bronco
- Location: San Jacinto, Ca
- Contact:
Re: Kel Fab Bronco For Sale
Oops, can't figure out how to embed that video...
- Kel Fab Creations
- Posts: 727
- Joined: Wed Nov 23, 2011 2:01 pm
- Bronco Info: 95 Bronco
- Location: San Jacinto, Ca
- Contact:
Re: Kel Fab Bronco For Sale
I also have autofab poly engine and trans mounts that will come with the truck.
-
- Posts: 1677
- Joined: Mon Mar 03, 2014 8:45 am
- Bronco Info: 1996 EB 351W!! First Bronco!! Plan: Prerunner/ Trail Rig/ SHTF All around Rig
Re: Kel Fab Bronco For Sale
if only I could sell all the parts I have gathered and my bronco to come close to buying this!!
- Andy Jones
- Posts: 2205
- Joined: Tue Dec 08, 2009 2:47 pm
- Bronco Info: In the Works!
- Location: Canyon Lake,ca
- Contact:
Kel Fab Bronco For Sale
Awesome Truck ! Awesome Price !! Good luck on your sale Kelly. I have Kel Fab Products on my bronco that I'm building. And I can say they're definitely top-notch components.
- Kel Fab Creations
- Posts: 727
- Joined: Wed Nov 23, 2011 2:01 pm
- Bronco Info: 95 Bronco
- Location: San Jacinto, Ca
- Contact:
Re: Kel Fab Bronco For Sale
$13,995
- Kel Fab Creations
- Posts: 727
- Joined: Wed Nov 23, 2011 2:01 pm
- Bronco Info: 95 Bronco
- Location: San Jacinto, Ca
- Contact:
Re: Kel Fab Bronco For Sale
More pics
You do not have the required permissions to view the files attached to this post.
- Kel Fab Creations
- Posts: 727
- Joined: Wed Nov 23, 2011 2:01 pm
- Bronco Info: 95 Bronco
- Location: San Jacinto, Ca
- Contact:
Re: Kel Fab Bronco For Sale
more
You do not have the required permissions to view the files attached to this post.
- Kel Fab Creations
- Posts: 727
- Joined: Wed Nov 23, 2011 2:01 pm
- Bronco Info: 95 Bronco
- Location: San Jacinto, Ca
- Contact:
- keenanduran1
- Posts: 559
- Joined: Fri May 09, 2014 10:29 am
- Bronco Info: 1993 Bronco. 1992 F150
- Location: Dana Point, CA
Re: Kel Fab Bronco For Sale
Congrats on the sale!
- keenanduran1
- Posts: 559
- Joined: Fri May 09, 2014 10:29 am
- Bronco Info: 1993 Bronco. 1992 F150
- Location: Dana Point, CA
Re: Kel Fab Bronco For Sale
Congrats on the sale! What headlights are those?
- tcm glx
- Peanut Butter
- Posts: 7304
- Joined: Tue Dec 08, 2009 11:19 am
- Bronco Info: 93 Ford Bronco 5.8
- Location: Riverside Ca
- Contact:
Re: Kel Fab Bronco For Sale
Congrats on the sale. Hopefully the owner stays on and keeps us updated.
http://www.gofastbroncos.com/forum/view ... &start=120keenanduran1 wrote:Congrats on the sale! What headlights are those?
- Kel Fab Creations
- Posts: 727
- Joined: Wed Nov 23, 2011 2:01 pm
- Bronco Info: 95 Bronco
- Location: San Jacinto, Ca
- Contact:
Re: Kel Fab Bronco For Sale
Thanks guys. Tony, he did say he's gonna setup an account here and continue the build.
-
- Posts: 45
- Joined: Wed Jan 21, 2015 12:18 pm
- Bronco Info: 96 bronco c&t stock width kings
- Location: Lake Elsinore, Ca
Kel Fab Bronco For Sale
U guys build bumpers. Also looking for rear hydro bumps to be installed. Possibly a cage too. I'm in elsinore
- Kel Fab Creations
- Posts: 727
- Joined: Wed Nov 23, 2011 2:01 pm
- Bronco Info: 95 Bronco
- Location: San Jacinto, Ca
- Contact:
Re: Kel Fab Bronco For Sale
I no longer build products for customers. Sorry.