Page 2 of 3
Re: Saginaw Pumps W/ Brackets
Posted: Mon Aug 17, 2020 11:12 am
by S00TLYFE
Bump, 1 460 and 6 5.0/5.8 setups fresh from sandblast this morning.
Sent from my iPhone using Tapatalk
Re: Saginaw Pumps W/ Brackets
Posted: Tue Aug 18, 2020 1:07 am
by Stan the Man
Killer looking pump brackets and lines. Might have to update my pump lines. These are direct fit? No adapters?
Re: Saginaw Pumps W/ Brackets
Posted: Tue Aug 18, 2020 6:51 am
by S00TLYFE
Stan the Man wrote:Killer looking pump brackets and lines. Might have to update my pump lines. These are direct fit? No adapters?
So, first off you will lose your factory cooler, other than that they’re plug and play for the most part. The hose end on the slip on side I usually have to ream out a little bit to slide it on easier as it’s just a tad smaller, but with AN fittings that’s the only way to make it work
Sent from my iPhone using Tapatalk
Re: Saginaw Pumps W/ Brackets
Posted: Tue Aug 25, 2020 2:20 pm
by S00TLYFE
bump, currently have
1 460 setup
3 5.0/5.8
Re: Saginaw Pumps W/ Brackets
Posted: Fri Aug 28, 2020 12:48 pm
by Andy Jones
Wanted to show off my setup that Travis just recently built up for me. I’m super pumped on the product and service! Thanks again dude!
Sent from my iPhone using Tapatalk
Re: Saginaw Pumps W/ Brackets
Posted: Wed Sep 09, 2020 3:31 pm
by freechrisb@gmail.com
What about filter and cooler? Thermal bypass; it gets cold -where I live?
Re: Saginaw Pumps W/ Brackets
Posted: Wed Sep 09, 2020 4:02 pm
by S00TLYFE
freechrisb@gmail.com wrote: ↑Wed Sep 09, 2020 3:31 pm
What about filter and cooler? Thermal bypass; it gets cold -where I live?
i dont do any of that stuff but you can adapt one inside on the low PSI side with the factory econoline hoses. I'll glad sell you a pump assembly and you can figure out hoses if you want, there just isnt enough demand for what youre asking for it to be worth my time to R&D
Re: Saginaw Pumps W/ Brackets
Posted: Wed Sep 09, 2020 4:03 pm
by S00TLYFE
Oh, and if you use my hoses with AN fittings, you lose the oem "cooler" but if you run econoline hoses it retains it, hope this helps.
Re: Saginaw Pumps W/ Brackets
Posted: Fri Sep 11, 2020 1:56 am
by freechrisb@gmail.com
Yes, thank U for U'r response. I actually have van bracket, new RedHead gearbox, and a new/reman Ford saginaw pump -with a remote reservoir fitting on top of it? Where U'r cap would go? This has me kinda wondering; guess go out and get a sealed canister type - mount it on the firewall or something. Only running 33s and no ram; though just want to do it once and it b right. Magna-Pure filter, thermal by-pass and cooler....seems like alot going on here. Thanks for any and all recommendations and help.
Re: Saginaw Pumps W/ Brackets
Posted: Fri Sep 11, 2020 9:43 am
by S00TLYFE
freechrisb@gmail.com wrote: ↑Fri Sep 11, 2020 1:56 am
Yes, thank U for U'r response. I actually have van bracket, new RedHead gearbox, and a new/reman Ford saginaw pump -with a remote reservoir fitting on top of it? Where U'r cap would go? This has me kinda wondering; guess go out and get a sealed canister type - mount it on the firewall or something. Only running 33s and no ram; though just want to do it once and it b right. Magna-Pure filter, thermal by-pass and cooler....seems like alot going on here. Thanks for any and all recommendations and help.
i actually just had my first encounter with those weird pumps, you can also just swap it out for one that takes a cap. i think the remote resi ones came off of RVs but havent been able to confirm
Re: Saginaw Pumps W/ Brackets
Posted: Thu Sep 17, 2020 8:06 am
by S00TLYFE
bump, currently have 5 5.0/5.8 setups ready to go, 2 460 setups
Re: Saginaw Pumps W/ Brackets
Posted: Thu Oct 01, 2020 3:30 pm
by S00TLYFE
bump, two 460 and 4 5.0/5.8 setups
Re: Saginaw Pumps W/ Brackets
Posted: Tue Dec 15, 2020 3:51 pm
by S00TLYFE
bump, just picked up 7 more from sandblast and assembled ready to go
Re: Saginaw Pumps W/ Brackets
Posted: Wed Dec 16, 2020 5:08 pm
by THEJESUS
Sent text
Re: Saginaw Pumps W/ Brackets
Posted: Thu Jan 14, 2021 9:42 am
by S00TLYFE
bump, currently have 3 5.0/5.8 setups in stock, anyone who buys before 10 PM PST 1/14/21 ill throw in a free shirt
or if you just want to buy a shirt, hit the link in my signature haha
Re: Saginaw Pumps W/ Brackets
Posted: Fri Jan 29, 2021 8:45 am
by Wrightracing.net
Do these pumps work well with a Hydraboost brake setup and a ram assist inline?
David Wright
Re: Saginaw Pumps W/ Brackets
Posted: Fri Jan 29, 2021 10:19 am
by S00TLYFE
Wrightracing.net wrote: ↑Fri Jan 29, 2021 8:45 am
Do these pumps work well with a Hydraboost brake setup and a ram assist inline?
David Wright
Hey Dave,
guys run them with both, no personal experience with it, im happy to sell you all the components minus the pump, because youll need a different one than i sell (Extra port) thats PN BBB INDUSTRIES 7322151, let me know!
Re: Saginaw Pumps W/ Brackets
Posted: Fri Jan 29, 2021 10:29 am
by Wrightracing.net
S00TLYFE wrote:Wrightracing.net wrote: ↑Fri Jan 29, 2021 8:45 am
Do these pumps work well with a Hydraboost brake setup and a ram assist inline?
David Wright
Hey Dave,
guys run them with both, no personal experience with it, im happy to sell you all the components minus the pump, because youll need a different one than i sell (Extra port) thats PN BBB INDUSTRIES 7322151, let me know!
Ok, thanks
David Wright
Re: Saginaw Pumps W/ Brackets
Posted: Wed Feb 03, 2021 2:24 pm
by S00TLYFE
bump, currently have 3 of these ready to go for 5.0/5.8
Re: Saginaw Pumps W/ Brackets
Posted: Mon May 03, 2021 11:47 am
by S00TLYFE
bump, have 3 setups ready to go, brackets are sandblasted, pulleys are sandblasted and powdercoated, reman pumps installed. $300 plus shipping or picked up in Buena Park or South Bay Los Angeles