Bronco Fuel Tank Skid
- DesolateMotorsports
- Posts: 68
- Joined: Tue Nov 22, 2016 2:26 pm
- Bronco Info: '92 with a slue of Desolate Motorsports products on it. Long travel, stock width
- Contact:
Bronco Fuel Tank Skid
Hey Bronco fans!
We have another product available to help protect your Bronco and can be easily installed at home. Our aftermarket skid for the factory fuel tank is made of 5052 Grade Aluminum, press broke to shape, and Tig welded together. This skid plate completely replaces the factory one and requires no modifications to install. For more info and to order, please check out our website or give the shop a call and we can get you taken care of. Our product page for this item can be found HERE
$299 + Shipping
^^^ Please note the photo above was taken before it was tig welded. ^^^
We have another product available to help protect your Bronco and can be easily installed at home. Our aftermarket skid for the factory fuel tank is made of 5052 Grade Aluminum, press broke to shape, and Tig welded together. This skid plate completely replaces the factory one and requires no modifications to install. For more info and to order, please check out our website or give the shop a call and we can get you taken care of. Our product page for this item can be found HERE
$299 + Shipping
^^^ Please note the photo above was taken before it was tig welded. ^^^
Bronco Fuel Tank Skid
So RAD !! Ship away
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
-
- Posts: 1116
- Joined: Wed Feb 17, 2010 11:50 am
- Location: San Dimas
- Contact:
Re: Bronco Fuel Tank Skid
If you use your bronco, you want one. I went through 3 tanks before building something since nobody made one and now Greg has this making it a no brainer. Any bronco guy who uses his shit would be dump NOT to buy this.
Kris Hernandez
shockseals.com
shockseals.com
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: Bronco Fuel Tank Skid
What thickness is the aluminum sheet on these?
Owner of only dead and forgotten projects
- De$ertBronco
- Posts: 185
- Joined: Wed Feb 12, 2014 9:34 am
- Bronco Info: currently under the knife @ RICHER RACING!
Re: Bronco Fuel Tank Skid
their site says 3/16"ChaseTruck754 wrote:What thickness is the aluminum sheet on these?
- rdcjuanb
- Posts: 262
- Joined: Wed Nov 30, 2011 9:37 pm
- Bronco Info: 1995 Bronco parked in garage. Long term project.
- Location: Rancho Santa Margarita
- Contact:
Re: Bronco Fuel Tank Skid
I'll be grabbing one of these.
- Tchajagos
- Posts: 2124
- Joined: Sat Dec 17, 2011 11:07 am
- Bronco Info: 1993 xlt stock on 33' BFGs
- Location: Murrieta
Bronco Fuel Tank Skid
Are these stronger than the stock skid?
-
- Posts: 38
- Joined: Wed Feb 01, 2017 10:36 am
- Bronco Info: '96 5.0 5 speed with stuff and things from Desolate
Re: Bronco Fuel Tank Skid
I’ll be picking mine up next week
- CrazyBRONCOguy
- Posts: 54
- Joined: Thu Aug 08, 2013 3:17 am
- Bronco Info: 1992 and a 1978
Re: Bronco Fuel Tank Skid
Looks good. Since these are bent to form the bottom of the tank if dimensions where provided could you guys make one for the 25 gallon tank? Likely would just need to remove the straight section.
'92 Eddie Bauer- C6 Swap, 9" Swap, Roller 357W, AFR 165's, MAF, SCT Tuned, 4.10's
'78 Custom- 4" Deaver Lift, Mild 460, 8 Point Cage, 4.10's
'78 Custom- 4" Deaver Lift, Mild 460, 8 Point Cage, 4.10's
-
- Posts: 141
- Joined: Sun Sep 24, 2017 12:07 am
- Bronco Info: 1996 Ford Bronco, trail ready/sand loving.
- Location: San Jose, CA
Re: Bronco Fuel Tank Skid
I'd like to know that as well. Looks a bit thicker than stocker.Tchajagos wrote:Are these stronger than the stock skid?
-
- Posts: 2328
- Joined: Mon May 27, 2013 12:25 am
- Bronco Info: Bronco List:
- Location: Phoenix, AZ
Re: Bronco Fuel Tank Skid
Guys it’s 3/16” aluminum- I’d venture it’s 5-10 times stronger than stock.
http://www.vintageironfabworks.com
77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
-
- Posts: 141
- Joined: Sun Sep 24, 2017 12:07 am
- Bronco Info: 1996 Ford Bronco, trail ready/sand loving.
- Location: San Jose, CA
Re: Bronco Fuel Tank Skid
Thanks, just gotta be sure!VintageIronFab wrote:Guys it’s 3/16” aluminum- I’d venture it’s 5-10 times stronger than stock.