Ford 408 and C6

Chachi's Bronco
Posts: 8
Joined: Wed Aug 05, 2015 2:56 pm
Bronco Info: 1992 Bronco,LS6 with 4L80E 4.5" Cho fabricated TTB, speedway full floater 9", 4 link rear on 40" BFG

Ford 408 and C6

Post by Chachi's Bronco »

I am selling my 408 stroker and C6 trans. I am going in a different direction with my Bronco and will be pulling them out next week. Price for motor $3500.00 and trans price $1500. Or best offer. I will upload photos later today.

Build sheet on 408
F303 cam with Howard's Cams retro fit hydraulic roller lifters.
World Product Windsor Jr. Heads with 1.6 rocker arms. Heads have ARP heads studs.
Stock intake has been matched ported by Greg @ Total Proformance in Santee.
Motor was built last summer and has about 3k miles.

Trans build sheet
2500 stall converter
Welbuild in Oceanside did the planetary gears and drum upgrade & manual valve body. Large oils pan from summit racing. 205 transfer case adaptor.
Was rebuild last summer and has about 3k miles
Chachi's Bronco
Posts: 8
Joined: Wed Aug 05, 2015 2:56 pm
Bronco Info: 1992 Bronco,LS6 with 4L80E 4.5" Cho fabricated TTB, speedway full floater 9", 4 link rear on 40" BFG

Re: Ford 408 and C6

Post by Chachi's Bronco »

Here are some photos from the build of the motor last year.
You do not have the required permissions to view the files attached to this post.
hollandermotorsports
Posts: 969
Joined: Tue Aug 13, 2013 10:56 am
Bronco Info: 1990 Bronco lifted, 1995 Centurian F-150 with body lift delete

Re: Ford 408 and C6

Post by hollandermotorsports »

Sent a PM
Coltangstadt
Posts: 1
Joined: Sun May 14, 2017 12:52 am
Bronco Info: 1994 Bronco. 351w. Mostly stock

Re: Ford 408 and C6

Post by Coltangstadt »

Can you give me a call or text at 760.917.6707?
cccstrokinitracing
Posts: 15
Joined: Thu Jul 04, 2013 11:31 am
Bronco Info: 93 bronco , 4' lift on 33" but have been buying parts , 4" over TTB beams, glass ex....
Location: Yucaipa ca.

Re: Ford 408 and C6

Post by cccstrokinitracing »

Is the motor still available ?
Chachi's Bronco
Posts: 8
Joined: Wed Aug 05, 2015 2:56 pm
Bronco Info: 1992 Bronco,LS6 with 4L80E 4.5" Cho fabricated TTB, speedway full floater 9", 4 link rear on 40" BFG

Re: Ford 408 and C6

Post by Chachi's Bronco »

yes it is just pulled it out this weekend.
Chachi's Bronco
Posts: 8
Joined: Wed Aug 05, 2015 2:56 pm
Bronco Info: 1992 Bronco,LS6 with 4L80E 4.5" Cho fabricated TTB, speedway full floater 9", 4 link rear on 40" BFG

Re: Ford 408 and C6

Post by Chachi's Bronco »

Here are a few more photos of them now that they are out. I also have the standalone wire harness from Ron Francis wiring for this motor. I also have a spare distributor and also the accessory drive with the ac compressor, power steering pump and alt. The Torque converter is a Hughes performance 2500 stall.
You do not have the required permissions to view the files attached to this post.
Chachi's Bronco
Posts: 8
Joined: Wed Aug 05, 2015 2:56 pm
Bronco Info: 1992 Bronco,LS6 with 4L80E 4.5" Cho fabricated TTB, speedway full floater 9", 4 link rear on 40" BFG

Re: Ford 408 and C6

Post by Chachi's Bronco »

I am lowering the price on the motor and trans.
Motor $3000.00 Firm
Trans $1000.00 Firm
Chachi's Bronco
Posts: 8
Joined: Wed Aug 05, 2015 2:56 pm
Bronco Info: 1992 Bronco,LS6 with 4L80E 4.5" Cho fabricated TTB, speedway full floater 9", 4 link rear on 40" BFG

Re: Ford 408 and C6

Post by Chachi's Bronco »

Trans has been sold.

Motor still available.
Chachi's Bronco
Posts: 8
Joined: Wed Aug 05, 2015 2:56 pm
Bronco Info: 1992 Bronco,LS6 with 4L80E 4.5" Cho fabricated TTB, speedway full floater 9", 4 link rear on 40" BFG

Re: Ford 408 and C6

Post by Chachi's Bronco »

Motor has been sold.
Post Reply