Steering Box Weld-on Reinforcement Plate

VintageIronFab · Post by **VintageIronFab** » Thu Jun 01, 2017 1:07 pm

Hello All,
I made one of these for another GFB member and have 6 of these to sell for $60 shipped. Holes are drilled to a 7/16" size to match the bolt size; a 1/2" hole would prob aid ease in installation of the box but the 7/16" keeps everything very tight. The pic is to illustrate that my part actually fits like designed without having to rework the part.

PayPal u10072@hotmail.com as a friend/family. Ships USPS priority so it ships anywhere!

Wrightracing.net · Post by **Wrightracing.net** » Thu Jun 01, 2017 11:38 pm

Looks cool Matt. I plated the frame and did weld-on washers. That plate would have saved time.

Sent from my SM-T900 using Tapatalk

Wrightracing.net · Post by **Wrightracing.net** » Thu Jun 01, 2017 11:40 pm

I am also going to do the sector shaft support like Solo Motorsports has done with a hiem joint to a frame mount.

Sent from my SM-T900 using Tapatalk

shawn t · Post by **shawn t** » Fri Jun 02, 2017 10:14 am

What's the plate thickness? What's the correct stud length(s)?

VintageIronFab · Post by **VintageIronFab** » Fri Jun 02, 2017 1:07 pm

Plate is 3/16" thick- bolts are 7/16" but I'm not sure the length.

Steering Box Weld-on Reinforcement Plate

Steering Box Weld-on Reinforcement Plate

Re: Steering Box Weld-on Reinforcement Plate

Re: Steering Box Weld-on Reinforcement Plate