8.8 FSB/F-150 rear axle

User avatar
ntsqd
Posts: 332
Joined: Fri Dec 11, 2009 8:49 pm
Bronco Info: '70 Early Bronco SuperCab Shortbed Pick-up "Bronc-up" aka "Frank(entruck)", '96 OJB "Blanc-Oh!"
Location: upper SoCA

8.8 FSB/F-150 rear axle

Post by ntsqd »

4.56 gears, Tru-Trac, Top braced, Pair of Mark Williams bearing caps, ARB cover, Solo Motorsports lower shock mounts.
Gears & Tru-Trac have about 10,000 miles on them. Broken in with regular dino oil for ~500 miles, has had SWEPCO 80-90 in it ever since. Going to a Dana 60 to get 8 lugs to match the front, so this will be coming out soon.
Full disclosure: The shop that set these gears up warned me that they would be very slightly noisy and to not worry about it. They are and I haven't. Have to know what to listen for to even hear it. Can supply shop contact if buyer would like to talk to them.

Local pick-up only, price OBO my user name at yahoo.com works best

Pic of break-in lube change with lower shock mounts about to be added:
Image

Pic taken by the PO:
Image
Cross-threaded is tighter than Lock-Tite.
User avatar
ntsqd
Posts: 332
Joined: Fri Dec 11, 2009 8:49 pm
Bronco Info: '70 Early Bronco SuperCab Shortbed Pick-up "Bronc-up" aka "Frank(entruck)", '96 OJB "Blanc-Oh!"
Location: upper SoCA

Re: 8.8 FSB/F-150 rear axle

Post by ntsqd »

Oops, $750 OBO
Cross-threaded is tighter than Lock-Tite.
User avatar
Nick
Founder
Posts: 3965
Joined: Sat Dec 05, 2009 12:36 pm
Bronco Info: 1995 bird poop target
Location: La Habra Ca.

Re: 8.8 FSB/F-150 rear axle

Post by Nick »

Location?
"If at first you don't succeed, it may be cheaper to buy it."
User avatar
ntsqd
Posts: 332
Joined: Fri Dec 11, 2009 8:49 pm
Bronco Info: '70 Early Bronco SuperCab Shortbed Pick-up "Bronc-up" aka "Frank(entruck)", '96 OJB "Blanc-Oh!"
Location: upper SoCA

Re: 8.8 FSB/F-150 rear axle

Post by ntsqd »

East Ventura, 93004
Cross-threaded is tighter than Lock-Tite.
User avatar
ntsqd
Posts: 332
Joined: Fri Dec 11, 2009 8:49 pm
Bronco Info: '70 Early Bronco SuperCab Shortbed Pick-up "Bronc-up" aka "Frank(entruck)", '96 OJB "Blanc-Oh!"
Location: upper SoCA

Re: 8.8 FSB/F-150 rear axle

Post by ntsqd »

SOLD
Cross-threaded is tighter than Lock-Tite.
Post Reply