Bronco Fuel Tank Skid

Posts: 51
Joined: Tue Nov 22, 2016 2:26 pm
Bronco Info: '92 with a slue of Desolate Motorsports products on it. Long travel, stock width

Bronco Fuel Tank Skid

Postby DesolateMotorsports » Wed Jan 10, 2018 4:56 pm

Hey Bronco fans!

We have another product available to help protect your Bronco and can be easily installed at home. Our aftermarket skid for the factory fuel tank is made of 5052 Grade Aluminum, press broke to shape, and Tig welded together. This skid plate completely replaces the factory one and requires no modifications to install. For more info and to order, please check out our website or give the shop a call and we can get you taken care of. Our product page for this item can be found HERE
$299 + Shipping

Image
^^^ Please note the photo above was taken before it was tig welded. ^^^

Image
Image

Posts: 197
Joined: Thu Mar 06, 2014 9:38 am
Bronco Info: Bone stock, ready to build

Bronco Fuel Tank Skid

Postby Bajaluv » Wed Jan 10, 2018 9:00 pm

So RAD !! Ship away [emoji1598]


Sent from my iPhone using Tapatalk Pro

Posts: 1033
Joined: Wed Feb 17, 2010 11:50 am
Location: San Dimas

Re: Bronco Fuel Tank Skid

Postby shockseals.com » Wed Jan 10, 2018 9:12 pm

If you use your bronco, you want one. I went through 3 tanks before building something since nobody made one and now Greg has this making it a no brainer. Any bronco guy who uses his shit would be dump NOT to buy this.
Kris Hernandez
shockseals.com

Spy/Ninja
Posts: 8582
Joined: Thu Jan 28, 2010 9:46 am
Bronco Info: Don't have one - just old Ford trucks

Location: Huntington Beach, CA

Re: Bronco Fuel Tank Skid

Postby ChaseTruck754 » Fri Jan 12, 2018 9:31 am

What thickness is the aluminum sheet on these?
Owner of only dead and forgotten projects

Posts: 164
Joined: Wed Feb 12, 2014 9:34 am
Bronco Info: currently under the knife @ RICHER RACING!

Re: Bronco Fuel Tank Skid

Postby De$ertBronco » Fri Jan 12, 2018 10:09 am

ChaseTruck754 wrote:What thickness is the aluminum sheet on these?


their site says 3/16"

Posts: 250
Joined: Wed Nov 30, 2011 9:37 pm
Bronco Info: 1995 Bronco parked in garage. Long term project.

Location: Rancho Santa Margarita

Re: Bronco Fuel Tank Skid

Postby rdcjuanb » Fri Jan 12, 2018 10:32 am

I'll be grabbing one of these.

Posts: 1833
Joined: Sat Dec 17, 2011 11:07 am
Bronco Info: 1993 xlt stock on 33' BFGs

Location: Riverside

Bronco Fuel Tank Skid

Postby Tchajagos » Fri Jan 12, 2018 3:50 pm

Are these stronger than the stock skid?

Posts: 21
Joined: Wed Feb 01, 2017 10:36 am
Bronco Info: '96 5.0 5 speed with stuff and things from Desolate

Re: Bronco Fuel Tank Skid

Postby cali kid » Sat Jan 13, 2018 2:46 pm

I’ll be picking mine up next week :D

Posts: 45
Joined: Thu Aug 08, 2013 3:17 am
Bronco Info: 1992 and a 1978

Re: Bronco Fuel Tank Skid

Postby CrazyBRONCOguy » Mon Jan 15, 2018 4:52 am

Looks good. Since these are bent to form the bottom of the tank if dimensions where provided could you guys make one for the 25 gallon tank? Likely would just need to remove the straight section.
'92 Eddie Bauer- C6 Swap, 9" Swap, Roller 357W, AFR 165's, MAF, SCT Tuned, 4.10's
'78 Custom- 4" Deaver Lift, Mild 460, 8 Point Cage, 4.10's


Return to “Parts”

Who is online

Users browsing this forum: No registered users and 1 guest

 

 

cron