GoFastBroncos.com

So this is going to be my ride for a little while. Some of you may know the truck and her old owner.

Ford F150 Super Crew
2 inch cage front to rear
H&M front end with 2.5 c/o 3.0 bypass race series king and ram assist steering
rear is linked with 2.5 3.0 race series king
The truck has been back halfed with 50 gal cell dual Tranny coolers and Batteries, it also has some aluminum boxes in rear behind cab.
Reaend is 40 spline floater and 10 inch third member
2.5 hubs with 6 piston brakes on all 4 corners
6 on 6.5 RG with 39 BFG KR2
PRP seats
PCI Intercom and head sets
110 kenwood
switch pros
Baja Design light

I will add to the list once I go through the truck.
It is a proven drive to location then drive home after vehicle that has been well cared for.
The build is done well with lots of up travel in the rear and a solid front end for what it is.
The truck is easy to drive and load the family in.....it meets my new life needs.

some more from before me owning.

Just don’t sell it!


Sent from my iPhone using Tapatalk

I promise! Hah

Looks like a pretty sweet setup Willie.

more late night pictures

Looks kickass!!

Cool truck!

Tony and Steve Thx

it is a little bit of a learning curve on this thing.

I have owned 2 stock version of this year range truck, so I feel good on that.

The built version of this truck is a new ball game for me on the A-Arm front.
The Back half and Link set up is well thought out and lots of up travel. I may have said that already earlier. The truck cycles well in the rear and only needs a good power wash to be cleaned up. The fuel system is dual pump and I just need to wire the sending unit from cell to gauge. I also need to delete the stock fuel system from the ECM.

I am a fan of the Bedsides as far as look but they are thin so I may have to address that down the road.

The 2 tranny coolers have fans on temp sensor and it has a deep pan so tons of fluid. The 4R70w is not a big HP tranny but can handle 400ish HP probably, so for now I will service and look at the valve body to see if a upgrade is needed "j Mod" seems to be a good idea.

I will keep adding to the list....

One of my favorite trucks Willie, glad you ended up with it. When are we taking it out?

I was just thinking about texting you... hah

I’ve always loved this body style. It just looks so good with big fenders and bed sides... have thought about building one many times!

I agree with Steve. LOVE this body style with big fenders. Not a huge fan of them in stock form though. They just look "right" with the big fenders, and something (the rounded front to the grill/headlights) looks off to me in stock form.

Still, the 4 door setup should make life easy for getting the kiddos in & out, or letting a few buddies tag along instead.

SteveG wrote:I’ve always loved this body style. It just looks so good with big fenders and bed sides... have thought about building one many times!

I agree, She will stay stock look big finders. I don't have much choice as she is wide as hell.

ChaseTruck754 wrote:I agree with Steve. LOVE this body style with big fenders. Not a huge fan of them in stock form though. They just look "right" with the big fenders, and something (the rounded front to the grill/headlights) looks off to me in stock form.

Still, the 4 door setup should make life easy for getting the kiddos in & out, or letting a few buddies tag along instead.

4 doors and me getting old.......big plus.

I am thinking of using this ....any feedback... I would have to use the Bronco buttons not sure if that will work.

I am also pumped on these Baja Trackers, I plan on using these for the races and group trips. Check out the training video. I figure for group trip this would allow for big groups to break up and still stay in contact and track each other. It keep the trail more usable for fun and less dust. We will see how the group thing works. The tracker can be put in any truck and you don't have to use all of them.


https://www.bajatracking.com/

Where’s that bracket from and the cost in those? Do they come with the rear cover as well?

VintageIronFab wrote:Where’s that bracket from and the cost in those? Do they come with the rear cover as well?

This one I have been hoarding for a few years now. One of the members on Gofast found it and sold it to me. (Thanks Nick)

The mustang guys are the group that had been making them. Saleen group, I think it was.


I have been offering this one to people, so they can make a comeback.....no takers...... Yes it has the back covers as well

Come on Willie! You know I offered! Send it up this way & I'll get it put in cad so we can get um cut...