1995 F-150 Build
- S00TLYFE
- Posts: 1068
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
1995 F-150 Build
A lot of you guys already know, but I picked up a super clean F-150 a few weeks ago.
1995 302/Auto with 184,000 miles. The truck still passes smog and the AC blows ice cold. I have all the stuff to convert it to 4x4 which I will probably do after desert season is over. As of right now shes on track to make me all over Baja for the 50th 1000 next week.
1995 302/Auto with 184,000 miles. The truck still passes smog and the AC blows ice cold. I have all the stuff to convert it to 4x4 which I will probably do after desert season is over. As of right now shes on track to make me all over Baja for the 50th 1000 next week.
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
- tcm glx
- Peanut Butter
- Posts: 7305
- Joined: Tue Dec 08, 2009 11:19 am
- Bronco Info: 93 Ford Bronco 5.8
- Location: Riverside Ca
- Contact:
Re: 1995 F-150 Build
Pictures.....!
- S00TLYFE
- Posts: 1068
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: 1995 F-150 Build
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
- S00TLYFE
- Posts: 1068
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: 1995 F-150 Build
Jack approves of being able to ride in a truck again
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
- S00TLYFE
- Posts: 1068
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: 1995 F-150 Build
Went ahead and swapped my Corbeaus in though because i picked up an expedition console I plan on swapping on for my race radio and GPS (not going to have time to get it done before the 1000 though.
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
- S00TLYFE
- Posts: 1068
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: 1995 F-150 Build
Decided to throw my ttb stuff under this truck with some 5100s and deavers so I can drive this thing to mexico next week.
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
- S00TLYFE
- Posts: 1068
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: 1995 F-150 Build
i really hate not being able to edit posts because i accidentally sent that out of order but you guys get the idea.
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
-
- Posts: 770
- Joined: Thu Oct 01, 2015 9:48 pm
- Bronco Info: '93 F150 XLT, '89 2wd B2(Smurfette)
- Location: Jamul, CA
-
- Posts: 2328
- Joined: Mon May 27, 2013 12:25 am
- Bronco Info: Bronco List:
- Location: Phoenix, AZ
Re: 1995 F-150 Build
Super nice truck- whatever you do keep it stock width!
http://www.vintageironfabworks.com
77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
- S00TLYFE
- Posts: 1068
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: 1995 F-150 Build
That's my ideal goal. Mild build, super clean, stock width.VintageIronFab wrote:Super nice truck- whatever you do keep it stock width!
We'll see what happens but that's what my goal is. As long as it can get me down to baja for beer and tacos I'm happy with it.
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
-
- Posts: 2328
- Joined: Mon May 27, 2013 12:25 am
- Bronco Info: Bronco List:
- Location: Phoenix, AZ
Re: 1995 F-150 Build
Well the Autofab basically stock width fenders are super cool and fit great. If I️ had gone that route- THOUSANDS still would be in my account and months of work saved!!!
http://www.vintageironfabworks.com
77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
-
- Posts: 5
- Joined: Mon Oct 24, 2016 10:46 pm
- Bronco Info: 1995 f-150 std cab short bed 5.8 automatic
Re: 1995 F-150 Build
Any plans for the rear? I like the wheel and tire setup btw!
- S00TLYFE
- Posts: 1068
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: 1995 F-150 Build
I actually have a set of F53 deavers at deaver getting freshened up that will go on the rear along with Taylor (nubreed) old coilovers and bypasses, not sure if I'll have time to get them on before the 1000 tho.Joshmellor19 wrote:Any plans for the rear? I like the wheel and tire setup btw!
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
- S00TLYFE
- Posts: 1068
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: 1995 F-150 Build
Haha I hear ya dude I feel like you might as well count on about 15k minimum in additional spending the second you decide to go wider.VintageIronFab wrote:Well the Autofab basically stock width fenders are super cool and fit great. If I️ had gone that route- THOUSANDS still would be in my account and months of work saved!!!
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
-
- Posts: 99
- Joined: Fri Aug 15, 2014 2:05 pm
- Bronco Info: It's a non Bronc! the bronco's larger cousin with a bed, a 95 f1
Re: 1995 F-150 Build
Super clean truck dude! You never see these things in silver either.
-
- Posts: 2328
- Joined: Mon May 27, 2013 12:25 am
- Bronco Info: Bronco List:
- Location: Phoenix, AZ
Re: 1995 F-150 Build
I can say that the 38 gallon rear tank is super easy to install and makes it easy to ditch the front factory tank if you choose which really opens up the rear shock placement on the upper mount.
http://www.vintageironfabworks.com
77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
- S00TLYFE
- Posts: 1068
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: 1995 F-150 Build
Thanks man I appreciate itF1Brendan wrote:Super clean truck dude! You never see these things in silver either.
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
- S00TLYFE
- Posts: 1068
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: 1995 F-150 Build
VintageIronFab wrote:I can say that the 38 gallon rear tank is super easy to install and makes it easy to ditch the front factory tank if you choose which really opens up the rear shock placement on the upper mount.
That's definitely on my list of things to do, how does the line situation work though? Just cap off the stuff for the front tank?
Haven't looked SUPER closely but I haven't found a good write up on it yet.
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)
-
- Posts: 2328
- Joined: Mon May 27, 2013 12:25 am
- Bronco Info: Bronco List:
- Location: Phoenix, AZ
Re: 1995 F-150 Build
There’s a couple ways to do it. I cut the tit off at the block where the lines go to
The front pump and welded up the hole but wouldn’t do that again. Personally cut before and after the block of sorts where the line goes to the front pump, slide a tube nut and sleeve over the line, single flare and put a -6an male/male fitting in to connect the two lines.
The front pump and welded up the hole but wouldn’t do that again. Personally cut before and after the block of sorts where the line goes to the front pump, slide a tube nut and sleeve over the line, single flare and put a -6an male/male fitting in to connect the two lines.
http://www.vintageironfabworks.com
77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
- S00TLYFE
- Posts: 1068
- Joined: Mon Mar 02, 2015 10:14 am
- Bronco Info: IT RAPTOR NOW
- Location: Buena Park
Re: 1995 F-150 Build
that seems easy enough, already got a bronco tank too and deleted the spare tire carrierVintageIronFab wrote:There’s a couple ways to do it. I cut the tit off at the block where the lines go to
The front pump and welded up the hole but wouldn’t do that again. Personally cut before and after the block of sorts where the line goes to the front pump, slide a tube nut and sleeve over the line, single flare and put a -6an male/male fitting in to connect the two lines.
https://donttellmywiferacing.bigcartel.com/ (We have shirts, stickers, saginaw pumps, and other Bronco/OBS goodies)