OG 94 Explorer Build
-
- Posts: 1677
- Joined: Mon Mar 03, 2014 8:45 am
- Bronco Info: 1996 EB 351W!! First Bronco!! Plan: Prerunner/ Trail Rig/ SHTF All around Rig
Re: OG 94 Explorer Build
Those look really really good.
Re: OG 94 Explorer Build
Finally getting around to finishing up the rear. Still need to do anchor points for ratchet straps, get some new carpet, & fit the panels back in, but it's air tight & coming along good.
Re: OG 94 Explorer Build
Upped the cooler size. You can never have too big of a cooler. Also did a test run in the dirt, it's so nice to finally have a sealed cab and all my cargo anchored down.
- SteveG
- Admin
- Posts: 6106
- Joined: Sat Dec 05, 2009 10:25 am
- Bronco Info: Wilson: 96, Stretched 17.5", coil-overs / Bypasses, 4-link, a fridge and all the amenities :)
- Location: Arroyo Grande, CA
Re: OG 94 Explorer Build
Good call. Next upgrade should be a fridge. You'll never look back!
Sho nuff,
SteveG
SteveG
Re: OG 94 Explorer Build
I would LOVE to have a fridge, so many things on the list though!
Re: OG 94 Explorer Build
Baja never ceases to amaze, a 3 day weekend is just not long enough
- plymouthrock
- Posts: 11
- Joined: Thu May 12, 2011 8:21 pm
- Bronco Info: had a 71 years ago, but want to get an 80-96 to build for sand dunes
Re: OG 94 Explorer Build
I love what you did with the wheels! What did you use? Also you said you punched the rivets out. Did you put new ones in after painting? They look awesome
OG 94 Explorer Build
Just tapped them out and rattle canned the wheels. I was afraid that powder coat would be too thick. They aren't really rivets, so yeah I can just tap them back in.
- SteveG
- Admin
- Posts: 6106
- Joined: Sat Dec 05, 2009 10:25 am
- Bronco Info: Wilson: 96, Stretched 17.5", coil-overs / Bypasses, 4-link, a fridge and all the amenities :)
- Location: Arroyo Grande, CA
Re: OG 94 Explorer Build
Like. Thanks for the pics. I'll be down there early next week.
Sho nuff,
SteveG
SteveG
Re: OG 94 Explorer Build
One thing I really love about this truck is I can pretty much hop in it at any time and hit the dirt. Headed up into the hills with my son yesterday for a little fun.
[video]https://www.youtube.com/watch?v=EwL8lc55iVc[/video]
[video]https://www.youtube.com/watch?v=EwL8lc55iVc[/video]
Re: OG 94 Explorer Build
My transmission was not pumped after Baja. It got hot on me and boiled over (common A4LD issue). I've also been dealing with it slipping every morning when it's cold (another common A4LD issue). Threw in a new filter, a big Hayden trans cooler meant for a Class A RV towing 10,000, pounds, and installed in a drain plug so that I can keep the fluid fresh in the future. Trans is happy now, cold slippage issue is gone, shifts nice and solid. Also threw on a spare black grill, and put some little daytime runner leds in the valance. Got about a 200 mile dirt adventure planned for this weekend, good times!
Re: OG 94 Explorer Build
Really pumped on this new drop center hood from McNeil Racing. Should give it a great look and keep it OG!
-
- Posts: 770
- Joined: Thu Oct 01, 2015 9:48 pm
- Bronco Info: '93 F150 XLT, '89 2wd B2(Smurfette)
- Location: Jamul, CA
Re: OG 94 Explorer Build
It's on their website, but it's a horrible picture. A lot of fiberglass companies seem to have older websites. It's always worth a call!
Re: OG 94 Explorer Build
Well, my weekend run turned into a day trip after my buddy broke his rear shock mount. Truck did great, but this trip really made me want to cage it. The body is just rattling around so bad!
- SteveG
- Admin
- Posts: 6106
- Joined: Sat Dec 05, 2009 10:25 am
- Bronco Info: Wilson: 96, Stretched 17.5", coil-overs / Bypasses, 4-link, a fridge and all the amenities :)
- Location: Arroyo Grande, CA
Re: OG 94 Explorer Build
Man, I love that you are getting out so much in your explorer. You're putting a lot of us to shame! I really dig the drop center hoods. Nice job.
Sho nuff,
SteveG
SteveG
OG 94 Explorer Build
Had a blast with this thing in the snow, didn't skip a beat & the heater kept me nice & warm.
- tcm glx
- Peanut Butter
- Posts: 7305
- Joined: Tue Dec 08, 2009 11:19 am
- Bronco Info: 93 Ford Bronco 5.8
- Location: Riverside Ca
- Contact:
Re: OG 94 Explorer Build
Snow pictures look great!!
Re: OG 94 Explorer Build
Thanks Tony
Little tough to see, but I finally got the Currie spring plates installed, so no more funky stock lower shock mount and long U-bolts. Also did some bedside supports to the rear lower wheel well to push them out about 3" and make them nice & solid.
Little tough to see, but I finally got the Currie spring plates installed, so no more funky stock lower shock mount and long U-bolts. Also did some bedside supports to the rear lower wheel well to push them out about 3" and make them nice & solid.
Re: OG 94 Explorer Build
Solid day run with my son. Finally got to run with a Raptor. As expected he got me in the flats, but couldn't hang in the big stuff. Nothing is set in stone, but I got an offer on the truck that I am really considering. I have mixed emotions about it. I love this thing, but it's only a bunch of metal and parts, I could always build another one!
[video]https://www.youtube.com/watch?v=yMi6rAgfEPA[/video]
[video]https://www.youtube.com/watch?v=yMi6rAgfEPA[/video]