Underhood plumbing

hobbyturnedobsession · Thu Jan 09, 2020 11:29 am

I was wondering what everyone was doing with their smog equipment and vacuum canisters? My previous bronco included many zip ties and thats not going to fly this time. I'd like to keep things under the hood this time better organized and for the record I am horrible with organization.

VintageIronFab · Post by **VintageIronFab** » Fri Jan 10, 2020 5:11 pm

Look at the 96 trucks - much much simplified

hobbyturnedobsession · Mon Jan 13, 2020 7:47 pm

I'm sorry I should explain better. How are people relocating the canisters fuse boxes and such that have to be moved to an engine cage? Some underhood shots of where people found spots for all the stuff that comes off the inner fenders.

Sent from my moto g(6) using Tapatalk

Becks_Bronco · Post by **Becks_Bronco** » Tue Jan 14, 2020 1:49 pm

Paying attention to this as well.

If you relocate the battery, and swap to a vintage air type HVAC system, you gain tremendous amounts of space in the engine bay. Re-routing or eliminating some of the vacuum mess only helps even more.

S00TLYFE · Post by **S00TLYFE** » Tue Jan 21, 2020 8:43 am

Subbed for some future information

RyanDS650X · Post by **RyanDS650X** » Tue Jan 21, 2020 11:17 am

hobbyturnedobsession wrote:I'm sorry I should explain better. How are people relocating the canisters fuse boxes and such that have to be moved to an engine cage? Some underhood shots of where people found spots for all the stuff that comes off the inner fenders.

Sent from my moto g(6) using Tapatalk

Kritters build thread has some pics of how he moved stuff around. Maybe he’ll chime in.

Sent from my iPad using Tapatalk

mobil1syn · Post by **mobil1syn** » Tue Jan 21, 2020 12:19 pm

here is how i did mine. let me know you want more pictures

http://www.gofastbroncos.com/forum/sear ... 7&sr=posts

mobil1syn · Post by **mobil1syn** » Tue Jan 21, 2020 12:20 pm

ignore that one since this place wont let me edit post which is lame.

here is the right link
http://www.gofastbroncos.com/forum/view ... 46#p149925

hobbyturnedobsession · Wed Jan 22, 2020 7:13 pm

mobil1syn wrote:ignore that one since this place wont let me edit post which is lame.

here is the right link
http://www.gofastbroncos.com/forum/view ... 46#p149925

Thank you sir. I was thinking the same way. Make a mount for the fuse box and rotate the canister sideways. What did you end up doing with the smog pump breather chingus that has the hoses attached to it on the passenger side?

Sent from my moto g(6) using Tapatalk

hobbyturnedobsession · Wed Jan 22, 2020 7:13 pm

RyanDS650X wrote:
hobbyturnedobsession wrote:I'm sorry I should explain better. How are people relocating the canisters fuse boxes and such that have to be moved to an engine cage? Some underhood shots of where people found spots for all the stuff that comes off the inner fenders.

Sent from my moto g(6) using Tapatalk
Kritters build thread has some pics of how he moved stuff around. Maybe he’ll chime in.

Sent from my iPad using Tapatalk

Shoot I must have missed it. I'll look again thank you Ryan.

Sent from my moto g(6) using Tapatalk

mobil1syn · Post by **mobil1syn** » Tue Jan 28, 2020 7:46 am

hobbyturnedobsession wrote:Thank you sir. I was thinking the same way. Make a mount for the fuse box and rotate the canister sideways. What did you end up doing with the smog pump breather chingus that has the hoses attached to it on the passenger side?

i dont have a smog pump, but this is how a buddy with a speed density motor did his. his bronco came with the battery relocated and used that area to mount everything

mobil1syn · Post by **mobil1syn** » Tue Jan 28, 2020 7:48 am

he also reused the inner fender well. the drive is needed, the passenger side does nothing because the last time i was out with him it self ejected.

hobbyturnedobsession · Tue Jan 28, 2020 9:41 pm

Thank you! I've been considering reusing them. I'm not sure a 35" would clear.

Sent from my moto g(6) using Tapatalk

ThrustMaster · Post by **ThrustMaster** » Wed Jan 29, 2020 6:48 am

Trash can!! lol

hobbyturnedobsession · Thu Jan 30, 2020 9:58 pm

ThrustMaster wrote:Trash can!! lol

Hey it'll work!

Sent from my moto g(6) using Tapatalk