is there anyone that makes them?
any pro's- cons?
AOD manual valve body
- SteveG
- Admin
- Posts: 6100
- Joined: Sat Dec 05, 2009 10:25 am
- Bronco Info: Wilson: 96, Stretched 17.5", coil-overs / Bypasses, 4-link, a fridge and all the amenities :)
- Location: Arroyo Grande, CA
Re: AOD manual valve body
Lentech makes some super cool stuff for the AOD.
EDIT: It's been a long time since I've talked to them, but Lentech has several different options depending on what you want to do with the transmission. They were really helpful when I talked to them and gave me lots of info to work with.
EDIT: It's been a long time since I've talked to them, but Lentech has several different options depending on what you want to do with the transmission. They were really helpful when I talked to them and gave me lots of info to work with.
Sho nuff,
SteveG
SteveG
- Phoenix0783
- Posts: 658
- Joined: Thu Dec 10, 2009 12:50 pm
- Bronco Info: No more Bronco :(
- Location: Bend, OR
- Contact:
Re: AOD manual valve body
tci makes one: http://www.compperformancegroupstores.c ... ode=432200
My car is a hybrid; it burns gas and rubber.
- bajascott
- My belly is my best friend
- Posts: 2006
- Joined: Mon Dec 07, 2009 11:29 pm
- Bronco Info: its black, its fun to drive,and i dont have enough money to build it the way i want to!:)
- Location: southern oregon
- Contact:
Re: AOD manual valve body
thanks for the link Jaime,
i just looked at Lentech's web site.
im going to study.............................
i just looked at Lentech's web site.
im going to study.............................
- Phoenix0783
- Posts: 658
- Joined: Thu Dec 10, 2009 12:50 pm
- Bronco Info: No more Bronco :(
- Location: Bend, OR
- Contact:
Re: AOD manual valve body
Also check out Baumann Engineering if you haven't already
My car is a hybrid; it burns gas and rubber.
Re: AOD manual valve body
Had a long talk with Len (Lectech). One thing is its not possible to do a reverse valve body. Next he has all kinds of upgrades including shift kits. And he said he thinks most vendors are using his kits. For the Mustang drag racers he sells an OD defeat shaft to make it stronger. This means no TQ lockup in 4th gear. Better gearing (lower) is nice by using the later or truck gear 1 & 2. My 72 has an AOD with a shift kit and it shifts hard.bajascott wrote:is there anyone that makes them?
any pro's- cons?
If you want a built AOD Lentech is the best source. He in in Canada and has a drop ship place in the US. Fast turn around. Get on his web site and read about all the options.
Paul