Quick question: I am thinking of going JBG J40 deaver setup I realize they are 3" wide not like the Q80 that are 2.5".
I am wondering is the original setup on a bronco a 3" wide leaf already? If not what shackles to go with to help carry the 3" J40's'
any information would help
JBG J40
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: JBG J40
Yes the broncos are 3" wide leafs stock. The 4wd F-150's of the era are as well. The 2wd F-150's were 2.5" wide leafs like the F54 / Q80.
Owner of only dead and forgotten projects
- THEJESUS
- Posts: 169
- Joined: Wed May 18, 2016 4:30 pm
- Bronco Info: WHITE 1992 BRONCO XLT w/ 4" LIFT ON 35" TOYO OPEN COUNTRY'S
Re: JBG J40
ChaseTruck754 wrote:Yes the broncos are 3" wide leafs stock. The 4wd F-150's of the era are as well. The 2wd F-150's were 2.5" wide leafs like the F54 / Q80.
Thanks for the information... looks like I will order up the J40's... should I still change out the shackles or can I leave them stock?
If everything seems under control, you're just not going fast enough!
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: JBG J40
Depends on budget & desire. Longer shackles will up your travel numbers a bit (they let the leafs droop & compress a bit more), and they will also mess with your ride height. Do some reading around here about what shackles guys have used. Some are long & hit the body. Solo makes a kit to lower the shackle hanger for this, but I'd rather just get a shackle that works in the 1st place vs. buy the shackle then the kit to change this.
Owner of only dead and forgotten projects
- Tchajagos
- Posts: 2124
- Joined: Sat Dec 17, 2011 11:07 am
- Bronco Info: 1993 xlt stock on 33' BFGs
- Location: Murrieta
JBG J40
I have some J40s that have 2” of lift taken out. I made some shackles just like the solo shackles but for a 3” wide spring and dropped the hangers down. I had a lot of leaf separation at droop. I don’t know if this is due to the 2” off lift taken out or it’s just the stiffness of the 3” spring.
I ended up moving the hanger back and it cycled a lot better.
The Q80s have a bit more arch to them so I think that may be why these don’t cycle the same as the Q80s.
I ended up moving the hanger back and it cycled a lot better.
The Q80s have a bit more arch to them so I think that may be why these don’t cycle the same as the Q80s.
- RyanDS650X
- Posts: 1867
- Joined: Sun Dec 13, 2009 11:13 am
- Bronco Info: Autofab '96 XLT 5.8
- Location: Mesa, AZ
- Contact:
Re: JBG J40
I just installed these https://desolatemotorsports.com/shop/su ... nco-80-96/
I'm much happier with them than the Camburgs I used to have that rubbed the floor of the bed.
I'm much happier with them than the Camburgs I used to have that rubbed the floor of the bed.
'96 XLT 5.8l lil edelbrock, lil Autofab, LOTTA fun.
"I wouldnt even call adding beer as part of a prep...its like putting tires on the vehicle, you just do it."
-shockseals.com
"I wouldnt even call adding beer as part of a prep...its like putting tires on the vehicle, you just do it."
-shockseals.com
- THEJESUS
- Posts: 169
- Joined: Wed May 18, 2016 4:30 pm
- Bronco Info: WHITE 1992 BRONCO XLT w/ 4" LIFT ON 35" TOYO OPEN COUNTRY'S
Re: JBG J40
I know the q80 are much stiffer than the j40s so that might be an issue as well..
Ryan thanks I think I will order the desolate shackles as well. I want to get this setup on as soon as possible. I still have to regear the front end since my front diff blew out
Ryan thanks I think I will order the desolate shackles as well. I want to get this setup on as soon as possible. I still have to regear the front end since my front diff blew out
If everything seems under control, you're just not going fast enough!
-
- Posts: 32
- Joined: Tue Mar 12, 2019 6:39 pm
- Bronco Info: 96 bronco xl 5.0 5 speed
Re: JBG J40
I’m curious what front spring hanger you guys are running . I’ll be installing my j40s with a threat dropped rear spring hanger and extended shackle but I am undecided if I get a new oe style hanger , change to an f250 hanger or another option ?