Page 1 of 1

Go-fast Alugnments in Phoenix???

Posted: Thu Nov 30, 2017 2:05 pm
by VintageIronFab
Hello All,
Does anyone know who in the phx area actually CAN and WILL do an alignment on a 4.5” over 95 F150?? This for me is kinda becoming a nightmare.

Hey text me if you could - 602.502.8945

Thx,
Matt

Re: Go-fast Alugnments in Phoenix???

Posted: Sun Dec 03, 2017 4:22 pm
by SteveG
You're probably going to have a hard time finding someone to do a "go-fast" alignment. If your front end geometry is good, however, take it to any GOOD alignment tech and he or she can get you taken care of. Just tell them to align it to stock specs with as much caster as they can get out of it and 1/2 degree positive camber.

Re: Go-fast Alugnments in Phoenix???

Posted: Mon Dec 04, 2017 8:47 pm
by VintageIronFab
I’m getting it done- I’m getting killed on it but it’s getting done.

Re: Go-fast Alugnments in Phoenix???

Posted: Mon Dec 04, 2017 8:49 pm
by VintageIronFab
I’ll take this chance to say again- don’t go wider!!!

Re: Go-fast Alugnments in Phoenix???

Posted: Thu Dec 07, 2017 11:01 am
by Needles929
How did it turn out??

Re: Go-fast Alugnments in Phoenix???

Posted: Thu Dec 07, 2017 6:22 pm
by VintageIronFab
$342 worth! Personally it’s a scam.

Re: Go-fast Alugnments in Phoenix???

Posted: Thu Dec 07, 2017 10:18 pm
by SteveG
If it’s a scam, why allow them to work on it?

As a former manager of a repair shop that also did alignments, I can tell you TTB/TIB alignments are anything but cheap. Especially with modified front ends. And even more so on trucks with bad geometry. They are often impossible to align properly. Yet, somehow, this is almost always viewed as the shops fault.

Re: Go-fast Alugnments in Phoenix???

Posted: Thu Dec 07, 2017 11:14 pm
by VintageIronFab
Steve I don’t think what was “done” was what was done - it is what it is.