Go-fast Alugnments in Phoenix???

VintageIronFab
Posts: 2327
Joined: Mon May 27, 2013 12:25 am
Bronco Info: Bronco List:
Location: Phoenix, AZ

Go-fast Alugnments in Phoenix???

Post by VintageIronFab »

Hello All,
Does anyone know who in the phx area actually CAN and WILL do an alignment on a 4.5” over 95 F150?? This for me is kinda becoming a nightmare.

Hey text me if you could - 602.502.8945

Thx,
Matt
http://www.vintageironfabworks.com

77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
User avatar
SteveG
Admin
Posts: 6091
Joined: Sat Dec 05, 2009 10:25 am
Bronco Info: Wilson: 96, Stretched 17.5", coil-overs / Bypasses, 4-link, a fridge and all the amenities :)
Location: Arroyo Grande, CA

Re: Go-fast Alugnments in Phoenix???

Post by SteveG »

You're probably going to have a hard time finding someone to do a "go-fast" alignment. If your front end geometry is good, however, take it to any GOOD alignment tech and he or she can get you taken care of. Just tell them to align it to stock specs with as much caster as they can get out of it and 1/2 degree positive camber.
Sho nuff,
SteveG
VintageIronFab
Posts: 2327
Joined: Mon May 27, 2013 12:25 am
Bronco Info: Bronco List:
Location: Phoenix, AZ

Re: Go-fast Alugnments in Phoenix???

Post by VintageIronFab »

I’m getting it done- I’m getting killed on it but it’s getting done.
http://www.vintageironfabworks.com

77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
VintageIronFab
Posts: 2327
Joined: Mon May 27, 2013 12:25 am
Bronco Info: Bronco List:
Location: Phoenix, AZ

Re: Go-fast Alugnments in Phoenix???

Post by VintageIronFab »

I’ll take this chance to say again- don’t go wider!!!
http://www.vintageironfabworks.com

77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
User avatar
Needles929
Posts: 170
Joined: Thu Sep 14, 2017 10:11 am
Bronco Info: 95 Part Deux
Location: Mesa AZ

Re: Go-fast Alugnments in Phoenix???

Post by Needles929 »

How did it turn out??
95 Part Deux. Starting from scratch.
VintageIronFab
Posts: 2327
Joined: Mon May 27, 2013 12:25 am
Bronco Info: Bronco List:
Location: Phoenix, AZ

Re: Go-fast Alugnments in Phoenix???

Post by VintageIronFab »

$342 worth! Personally it’s a scam.
http://www.vintageironfabworks.com

77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
User avatar
SteveG
Admin
Posts: 6091
Joined: Sat Dec 05, 2009 10:25 am
Bronco Info: Wilson: 96, Stretched 17.5", coil-overs / Bypasses, 4-link, a fridge and all the amenities :)
Location: Arroyo Grande, CA

Re: Go-fast Alugnments in Phoenix???

Post by SteveG »

If it’s a scam, why allow them to work on it?

As a former manager of a repair shop that also did alignments, I can tell you TTB/TIB alignments are anything but cheap. Especially with modified front ends. And even more so on trucks with bad geometry. They are often impossible to align properly. Yet, somehow, this is almost always viewed as the shops fault.
Sho nuff,
SteveG
VintageIronFab
Posts: 2327
Joined: Mon May 27, 2013 12:25 am
Bronco Info: Bronco List:
Location: Phoenix, AZ

Re: Go-fast Alugnments in Phoenix???

Post by VintageIronFab »

Steve I don’t think what was “done” was what was done - it is what it is.
http://www.vintageironfabworks.com

77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
Post Reply