Hello All,
Does anyone know who in the phx area actually CAN and WILL do an alignment on a 4.5” over 95 F150?? This for me is kinda becoming a nightmare.
Hey text me if you could - 602.502.8945
Thx,
Matt
Go-fast Alugnments in Phoenix???
-
- Posts: 2328
- Joined: Mon May 27, 2013 12:25 am
- Bronco Info: Bronco List:
- Location: Phoenix, AZ
Go-fast Alugnments in Phoenix???
http://www.vintageironfabworks.com
77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
- SteveG
- Admin
- Posts: 6100
- Joined: Sat Dec 05, 2009 10:25 am
- Bronco Info: Wilson: 96, Stretched 17.5", coil-overs / Bypasses, 4-link, a fridge and all the amenities :)
- Location: Arroyo Grande, CA
Re: Go-fast Alugnments in Phoenix???
You're probably going to have a hard time finding someone to do a "go-fast" alignment. If your front end geometry is good, however, take it to any GOOD alignment tech and he or she can get you taken care of. Just tell them to align it to stock specs with as much caster as they can get out of it and 1/2 degree positive camber.
Sho nuff,
SteveG
SteveG
-
- Posts: 2328
- Joined: Mon May 27, 2013 12:25 am
- Bronco Info: Bronco List:
- Location: Phoenix, AZ
Re: Go-fast Alugnments in Phoenix???
I’m getting it done- I’m getting killed on it but it’s getting done.
http://www.vintageironfabworks.com
77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
-
- Posts: 2328
- Joined: Mon May 27, 2013 12:25 am
- Bronco Info: Bronco List:
- Location: Phoenix, AZ
Re: Go-fast Alugnments in Phoenix???
I’ll take this chance to say again- don’t go wider!!!
http://www.vintageironfabworks.com
77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
- Needles929
- Posts: 170
- Joined: Thu Sep 14, 2017 10:11 am
- Bronco Info: 95 Part Deux
- Location: Mesa AZ
-
- Posts: 2328
- Joined: Mon May 27, 2013 12:25 am
- Bronco Info: Bronco List:
- Location: Phoenix, AZ
Re: Go-fast Alugnments in Phoenix???
$342 worth! Personally it’s a scam.
http://www.vintageironfabworks.com
77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
- SteveG
- Admin
- Posts: 6100
- Joined: Sat Dec 05, 2009 10:25 am
- Bronco Info: Wilson: 96, Stretched 17.5", coil-overs / Bypasses, 4-link, a fridge and all the amenities :)
- Location: Arroyo Grande, CA
Re: Go-fast Alugnments in Phoenix???
If it’s a scam, why allow them to work on it?
As a former manager of a repair shop that also did alignments, I can tell you TTB/TIB alignments are anything but cheap. Especially with modified front ends. And even more so on trucks with bad geometry. They are often impossible to align properly. Yet, somehow, this is almost always viewed as the shops fault.
As a former manager of a repair shop that also did alignments, I can tell you TTB/TIB alignments are anything but cheap. Especially with modified front ends. And even more so on trucks with bad geometry. They are often impossible to align properly. Yet, somehow, this is almost always viewed as the shops fault.
Sho nuff,
SteveG
SteveG
-
- Posts: 2328
- Joined: Mon May 27, 2013 12:25 am
- Bronco Info: Bronco List:
- Location: Phoenix, AZ
Re: Go-fast Alugnments in Phoenix???
Steve I don’t think what was “done” was what was done - it is what it is.
http://www.vintageironfabworks.com
77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)