Okay guys.. I need some photos on how you guys are remounting the fuse box and nest of wires after you go Tube fender supports/Prerunner fenders.
Sent from my iPhone using Tapatalk
Mounting the rats nest!
- Andy Jones
- Posts: 2205
- Joined: Tue Dec 08, 2009 2:47 pm
- Bronco Info: In the Works!
- Location: Canyon Lake,ca
- Contact:
- ChaseTruck754
- Spy/Ninja
- Posts: 9194
- Joined: Thu Jan 28, 2010 9:46 am
- Bronco Info: Don't have one - just old Ford trucks
- Location: Huntington Beach, CA
Re: Mounting the rats nest!
VintageIron fab has a couple pics recently in his F-150 build thread.
Owner of only dead and forgotten projects
- Andy Jones
- Posts: 2205
- Joined: Tue Dec 08, 2009 2:47 pm
- Bronco Info: In the Works!
- Location: Canyon Lake,ca
- Contact:
Mounting the rats nest!
Thanks, Steve. I’ll take a look in his thread.ChaseTruck754 wrote:VintageIron fab has a couple pics recently in his F-150 build thread.
Sent from my iPhone using Tapatalk
-
- Posts: 1677
- Joined: Mon Mar 03, 2014 8:45 am
- Bronco Info: 1996 EB 351W!! First Bronco!! Plan: Prerunner/ Trail Rig/ SHTF All around Rig
Re: Mounting the rats nest!
Cho, mounted his underneath where the fender mounts close to the A-pillar with the fuses facing away from the engine.
-
- Posts: 2912
- Joined: Wed Dec 22, 2010 10:39 am
- Bronco Info: 94 5.8 Bronco w/dreams of being finished
Mounting the rats nest!
I put my fuse box off the engine cage. 1” tube from the engine cage around the box, it bolts to 1” inch strap underneath to cradle it. Make sure you Hagge your fenders before completely welding. I messed up and as you can see in the second pic I need to remove the fender to get to the box.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Posts: 2328
- Joined: Mon May 27, 2013 12:25 am
- Bronco Info: Bronco List:
- Location: Phoenix, AZ
Re: Mounting the rats nest!
I'm pretty much thinking that if you want coilovers (and especially with coilovers and bypasses) you almost have to get the m/c kicked all way back like the one AJ is using. Let's face it you run out of room if you're like me and just want the overflow and a washer tank along with all the other stuff. I'd still like to know the 120* bracket cost???
http://www.vintageironfabworks.com
77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
77- "Victoria"
71- "Annie" Halfcab
73- "Heloise"
96- "Cheryl"
95- Marilyn (F150)
Re: Mounting the rats nest!
Here's the last one I did
Re: Mounting the rats nest!
Second try